Question about Weiser Lock Powerbolt 1000 Lock

Open Question

I want to reset all opening code and start with a new

I followed the instructions and it suppose to only have 2 code and i have 3 code and can't erase the 1 one.

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 963 Answers

SOURCE: reset new codes and old existing codes won't

Here's the link to the online instructions:
http://www.weiserlock.com/PDFS/instructions/Electronics/Powerbolt.pdf
Programming instructions are on page 6. Notice that allowing too much time between inputs will be a problem.
If you cannot successfully override your existing codes, contact Weiserlock Customer service:
http://www.weiserlock.com/CustomerService/ProductSupport/SupportContact.aspx
A note about PDF files: You will need adobe Reader or equivalent installed if you are unable to view the instructions. http://get.adobe.com/reader/
Good luck!

Posted on Nov 06, 2011

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I do not know my password


Only one person is supposed to know your password. When logging in, on that page is a button, forgot password or something like that. Press the button and you will get an email, on the address you gave the site while setting up your account. Follow the instructions in the mail and everything will be ok in just a few minutes.
If you can access your account, goto settings and there change password. Be aware they again ask you current password before you can give in any changes.
If someone hacked your account and did change the settings, you don't get an e-mail, you won't be able to claim the account. You have to setup a new account.

Jan 05, 2015 | Facebook Computers & Internet

1 Answer

My 140express hasn't spun properly an is showing the sign F21


It sounds like a problem with the control board. To reset the codes follow these instructions:

1. Close the door.

2. Turn the knob to 6 o'clock position.

3. Wait 2 seconds.

The start/pause should begin flashing.

4. Press and hold the spin button.

5. Turn the knob to 7 o'clock position.

Wait 2 seconds.

6. Release the button.

7. Turn the knob to off.


This should erase the error code and get you running again.


If the error code returns, you have a problem with the motor, wiring or main control.


If the machine won't go into diagnostics to erase the error code, it would suggest a faulty control board.


Try it several times to see if you get it reset.

Hope this helps.
Bob

Jan 03, 2015 | Bosch Washing Machines

1 Answer

Password reset code zte v821


follow this instruction and fix it. God bless you
Instructions 1.
    • 1
Navigate to the "Options" menu.
    • 2
Select "Security" followed by "Phone."


    3 Select the option "Change Password" or "Password" followed by pressing the "Menu" button. Then select "Change Password."
      • 4
    Enter the old password when prompted.
      • 5
    Enter the new password, and then reenter the new password again, if prompted.
      • 6
    Press the "OK" key to submit your change.

    Jul 19, 2013 | Cell Phones

    1 Answer

    Browser zoom


    Suppose you want to zoom it at 150%, follow below instructions to make it default :-
    Open Regedit and navigate to HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Zoom. In the right-hand pane is a listing for ZoomFactor. Double-click on it and click the button next to Decimal. Change the value from 100000 to 150000, click OK, and exit Regedit. Now every time you open IE, it should be zoomed into 150%. This will also zoom any new tabs that are opened.

    Jun 30, 2013 | Computers & Internet

    8 Answers

    I forgot my facebook password


    If you forgot Facebook password by accident, try this forgot facebook password SmartKey Password Recovery as soon as possible. SmartKey Password Recovery is a good tool for us.

    12_18_2012_6_26_10_am.jpg

    Dec 03, 2012 | Facebook Social Network

    1 Answer

    Forgot password


    Better try a new password? You con do it by creating a password reset disk. You need a USB flash drive for it. 1. Click to open User accounts. 2.In the left pane click create a "password reset disk" and then follow the instructions. 3.Now you can reset your password with this password reset disk. 4.Log on the computer and windows displays a "incorrect password". Click OK. 5.Click "reset password" and then your USB flash drive. 6.Follow the instructions. 7.Log with a new password. Hope this might help. I've tried this.

    Oct 07, 2011 | Compaq Computers & Internet

    1 Answer

    I bought a 99 expedition used... can i reset the keyless door entry pad?


    I did a search and found this answer for you

    Here is the location with full instructions:
    The module is fastened to the top of the firewall directly behind the fuse box. It can be reached easily when you lie on your back in the driver floor area with your head close to the brake pedal. Just look up and you'll see it is clearly marked and the sticker also displays the factory-set access code for your truck.
    Once you locate the module Make a note of the 5-digit access code on it.
    Once you find the code, here is how to program it:

    Now that you have the codes follow these steps to operate it completely. Remember from the driver's door, all operations must start with the 5 digit code first then follow it with the other options.
    When pressing the controls on the keyless entry keypad, press the middle of the buttons to ensure a good activation.

    IMPORTANT: Every step outlined in every procedure below must be done within five (5) seconds of the previous step.

    REMEMBER THIS: If you try the factory code first and it doesn't work try to reset the keypad back to the factory code. Your personal code does not replace the factory-set code. So no matter what you can erase anyone's code back to the factory OEM setting. You can use either code to unlock your vehicle. Each time you set a new personal code the module will erase the previous one in favor of the new code.

    Deprogramming (erasing) your own or pre-set personal code and leaving only the factory-set
    1. Enter the factory-set code. (5 digit) from the sticker on the RAP module.
    2. Press the 1/2 control.
    3. Press the 7/8 and 9/0 controls at the same time.
    The system will now only respond to the factory-set code.

    Unlocking the driver's door (also disarms the perimeter alarm system)
    1. Enter either the factory-set code or your new personal code. The interior lights will illuminate as soon as the first valid digit is pressed.

    Unlocking all doors
    1. Unlock the driver's door (5 digit code) then press the 3/4 control.

    Locking the doors (also arms the perimeter alarm system)
    1. Press 7/8 and 9/0 controls at the same time. The 5-digit code does not have to be entered.

    Deactivating/Activating Auto lock
    1. Enter the five (5) digit code.
    2. Press and release the 3/4 control while holding the 7/8 control, then release 7/8.

    Programming your own personal entry code
    1. Enter the factory-set code (keypad will illuminate when first digit is pressed).
    2. Press the 1/2 control.
    3. Enter your personal 5-digit code.

    Sep 12, 2011 | Ford Expedition Cars & Trucks

    1 Answer

    How to reset key pad on door


    If you are looking to put your own code in then please do the following:
    1. Select 5 digits that you wnt to put in 2. Enter the code that the dealership gave you (also on the decal on the right trunk hinge). 3. Within 5 seconds, press 1/2 4. Within 5 seconds of pressing 1/2, enter your personal code, pressing each digit within 5 seconds of the previous digit.
    To erase your personal code, enter the original code, press 1/2 within 5 seconds, then wait 6 seconds. It will then resort back to the original code which cannot be erased.

    Mar 20, 2011 | 1996 Lincoln Mark VIII

    1 Answer

    Keypad instructions for entry - need instructions to change combination


    Programming/Erasing Personal Code
    A unique personal five-digit code can be programmed by following these steps:
    1. Enter the factory set five-digit code (the keypad will illuminate when pressed).
    1. Press 1/2 within five seconds of Step 1.
    1. Enter the unique five-digit code.
    The personal code does not substitute for the permanent factory set code. Either code can be used to access the vehicle. In addition, if a second personal code is programmed, it overwrites the previous personal code. To erase a personal code, carry out the following procedure:
    1. Enter factory set five-digit code.
    1. Press 1/2 within five seconds of Step 1.
    1. Press 7/8 and 9/0 at the same time within five seconds of Step 2.
    The system now responds only to the factory set code

    Mar 06, 2011 | 2003 Mercury Mountaineer

    2 Answers

    How to reset the door code on a ford expidition


    from the owners manual


    Programming your own personal entry code

    To program your own code:

    1. Enter factory set code (keypad will illuminate when pressed).

    2. Press 1/2 control within five

    seconds of step 1.

    3. Enter your personal 5 digit code.

    Enter each digit within five seconds

    of previous one.

    Do not set a code that includes five

    of the same number or presents

    them in sequential order. Thieves

    can easily figure out these types of codes.

    Your personal code does not replace the permanent code that the

    dealership gave you. You can use either code to unlock your vehicle. If a

    second personal code is entered, the module will erase it in favor of the

    new code.

    If you wish to erase your personal code, use the following instructions:

    1. Enter factory set code.

    2. Press 1/2 control within five

    seconds of step one.

    3. Press 7/8 control and 9/0 control

    at the same time within five seconds

    of step 2.

    The system will now only respond
    to the factory set code.

    Oct 28, 2010 | 2000 Ford Expedition

    Not finding what you are looking for?
    Weiser Lock Powerbolt 1000 Lock Logo

    Related Topics:

    301 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Weiser Lock Locks & Locksmithing Experts

    Jim Goldsmith
    Jim Goldsmith

    Level 3 Expert

    2005 Answers

    john h

    Level 3 Expert

    14512 Answers

    Cindy Wells

    Level 3 Expert

    5427 Answers

    Are you a Weiser Lock Lock and Locksmithing Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...