Question about Dualit Food Mixers

Open Question

Stop start button presses in light come on the other three buttons will not press down

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 10 Answers

SOURCE: my cuisinart 5.5 stand mixer

Make sure the plug is securely plugged into the wall.
Next, remove and reattach any mixing arms etc that may be attached to the mixer. Having one not attached properly can result in a start, start.
If problem persistes make sure the speed is reset.

If problem continues, here is an excerpt from the user manual found here.

http://www.cuisinart.com/share/pdf/manuals/sm-55.pdf

Problem: Your stand mixer has an
overload protection device and if
overloaded, it will shut down to protect
the motor.
Solution: In the unlikely even that this
happens:
• Turn off and unplug the unit.
• Reduce the load by removing some of
the ingredients, and allow the mixer to
stand for a few minutes.
Plug in and reset the speed. If the
stand mixer does not start when you
press the on button, allow the unit to
stand for additional time.

If you are still having trouble, the product comes with a 3 year limited warranty, so if you're bought it within the last 3 years it may be covered.

Good Luck!

Posted on Mar 01, 2011

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Kitchenaid '09 12C has light on, but no action. All parts click into place appropriately. No reset on base.


If nothing is working then it is your control switch. Pretty easy to replace and get. Cant remember the site name but if you put in your Kitchenaid model name and serial number it will pull up the site for replacement parts.

Aug 11, 2014 | Food Mixers

1 Answer

Type of switch


The start switch should be a single pole momentary switch which engages a latching circuit. When you press the stop button it opens the latching circuit. The latching circuit is usually a relay, but it could be a centrifugal switch on the motor. I can't find a wiring diagram to be able to tell you for certain.

Mar 29, 2014 | Hobart A200 Stand Mixer

1 Answer

Hi, Our Indian made Preethi Eco Chef mixer had stopped working after pressing the overload button repeatedly, any idea whether any repair centers in and around Ipswich


Hi, please replace the Overload button (Circuit Breaker) with a new one. You can purchase the Overload protector (Circuit breaker) in any nearby Mixer repair or Electrical shop. Please take the old Overload protector to get the new one of same specification which suits for your Mixer.

Apr 16, 2011 | Food Mixers

1 Answer

My cuisinart 5.5 stand mixer when you press the on button it starts for a second then it stops.


Make sure the plug is securely plugged into the wall.
Next, remove and reattach any mixing arms etc that may be attached to the mixer. Having one not attached properly can result in a start, start.
If problem persistes make sure the speed is reset.

If problem continues, here is an excerpt from the user manual found here.

http://www.cuisinart.com/share/pdf/manuals/sm-55.pdf

Problem: Your stand mixer has an
overload protection device and if
overloaded, it will shut down to protect
the motor.
Solution: In the unlikely even that this
happens:
• Turn off and unplug the unit.
• Reduce the load by removing some of
the ingredients, and allow the mixer to
stand for a few minutes.
Plug in and reset the speed. If the
stand mixer does not start when you
press the on button, allow the unit to
stand for additional time.

If you are still having trouble, the product comes with a 3 year limited warranty, so if you're bought it within the last 3 years it may be covered.

Good Luck!

Mar 01, 2011 | Cuisinart SM-55 Stand Mixer

1 Answer

I have Butterfly brand mixer grinder from India. While operating it went off due to overload, but it's not working now. I tried pressing the reset button but still no use. Now, I opened the machine and...


I have the same problem with Butterfly Ivory Plus mixer in India.... The mixer went off with over load. I pressed the reset button, but still the mixer wont start. Looks like a common prob with butterfly mixers.

Nov 02, 2010 | Food Mixers

2 Answers

Hobart H600 wont shut off


Sounds to me like the start switch contacts are welded shut.If you have a multimeter set it to ohms,remove 1 wire from the switch,put your meter leads across the switch and if you get a reading that switch is bad.If you dont get a reading i would check the side switch on the contactor.Im a hobartt tech and repair these mixers alot.Let me know.

Feb 11, 2009 | Hobart H600 Stand Mixer

2 Answers

Hobart A200 MIXER ON/OFF SWITCH


I would call hobart and have all the information about your machine you can find on the data plate they have more that one style of switch

Jan 28, 2009 | Hobart HL600 Legacy Stand Mixer

1 Answer

Is their a reset button for a L800 HOBART? Hit start sparks flew.


Yes,
DISCONNECT POWER
if you remove the top cover, you will find an overload group with a green and a red button on top, next to the contactor . One is test, the other is reset. On the side of the overload are two thumb wheels, one is auto/ manual, set this to auto, the other is -15%,0, +15%. If you are running very heavy batches and you want to push your motor harder, move it to +15, but it's not recommended. If it was set to manual, when it trips and cools down, it will not reset untill you press the reset button, in auto, once cool you an restart the mixer.

Nov 30, 2008 | Kenwood KM400 / KM410 Chef Classic Stand...

2 Answers

Instructions for Sunbeam 2350 Heritage Series Mixmaster


Go to sunbeam.com, select "kitchen", then select "customer service", then "instruction manual", then "stand mixers", scroll down to model #

Nov 23, 2008 | Sunbeam 2350 Heritage Series Mixer

2 Answers

Telcom Big Button telephone


I just found the right answer.

1 Take handset of ( you can minimize sound with the slide on the side )

2 Press the black store button at top ( where the cord comes in )

3 Dial the number

4 Press the black store button again

5 Now press the memory button ( MEM )

To finish choose the M number you want it to dial from

Good luck it works on mine

Andre

Oct 05, 2007 | KitchenAid K45SS Classic Stand Mixer

Not finding what you are looking for?
Food Mixers Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dualit Food Mixers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

eyecam

Level 2 Expert

94 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Are you a Dualit Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...