Question about HP Calcpad 200 Calculator And Numeric Keypad

Can this calculator be set to say 2 decimal places?

Ad

Posted on Mar 31, 2015

Ad

Hi,

a 6ya Technician can help you resolve that issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.

click here to Talk to a Technician (only for users in the US for now) and get all the help you need.

Goodluck!

Posted on Jan 02, 2017

Ad

Some calculators, and spreadsheets, do not display decimals when your answer is a whole number, unless you specifically set it to a certain number of decimal places.

Good luck,

Paul

Good luck,

Paul

Aug 01, 2015 | HP12C Finance Calculator

If you mean it is not showing everything after the decimal point, you can change that by pressing the [f] key followed by the number of decimal places to display. For example, to restrict it to 2 places, press [f][2]. If you want to see 4 places, press [f][4].

To show all possible decimal places, use the sequence [f][9].

From the manual (http://www.hp.com/ctg/Manual/c00363319.pdf):

"To display a different number of decimal places, press f followed by a digit key (0 through 9) specifying the number of decimal places. In the following examples, notice how the displayed form of the number inside the calculator - 14.87456320 - is rounded to the specified number of digits."

"Although nine decimal places were

specified after f, only eight are

displayed since the display can

show a total of only 10 digits. "

The standard display format, plus the specified number of decimal places, remain in effect until you change them; they are not reset each time the calculator is turned on. However, if Continuous Memory is reset, when the calculator is next turned on numbers will be displayed in the standard display format with two decimal places

shown.

If a calculated answer is either too small or too large to be displayed in the standard display format, the display format automatically switches to scientific notation. The display returns to the standard display format for all numbers that can be displayed in that format.

http://www.hp.com/ctg/Manual/c00363319.pdf

To show all possible decimal places, use the sequence [f][9].

From the manual (http://www.hp.com/ctg/Manual/c00363319.pdf):

"To display a different number of decimal places, press f followed by a digit key (0 through 9) specifying the number of decimal places. In the following examples, notice how the displayed form of the number inside the calculator - 14.87456320 - is rounded to the specified number of digits."

"Although nine decimal places were

specified after f, only eight are

displayed since the display can

show a total of only 10 digits. "

The standard display format, plus the specified number of decimal places, remain in effect until you change them; they are not reset each time the calculator is turned on. However, if Continuous Memory is reset, when the calculator is next turned on numbers will be displayed in the standard display format with two decimal places

shown.

If a calculated answer is either too small or too large to be displayed in the standard display format, the display format automatically switches to scientific notation. The display returns to the standard display format for all numbers that can be displayed in that format.

http://www.hp.com/ctg/Manual/c00363319.pdf

Sep 12, 2014 | HP 12c Calculator

Set the display to 2 decimal places then use the [RND] function. See how the manual describes the Round operation.

Brief example:

01- 42 2 [f][2]

02- 42 14 [f][RND]

03- 42 9 [f][9]

The above program takes the number displayed and rounds to 2 decimal places (nearest 100th), then displays all decimal places.

If you entered 2.876 and ran the program, it would display 2.880000000.

Brief example:

01- 42 2 [f][2]

02- 42 14 [f][RND]

03- 42 9 [f][9]

The above program takes the number displayed and rounds to 2 decimal places (nearest 100th), then displays all decimal places.

If you entered 2.876 and ran the program, it would display 2.880000000.

Jan 24, 2014 | HP 12c Calculator

Press DSP [FIX] 2 INPUT

Aug 03, 2012 | HP Office Equipment & Supplies

Non-printing models (also applies to HR-8TE printing calculator):

1. Press [AC]

2. Hold [SET/%] key for about 2 seconds

3. Press [TAX+]

4. Input the tax rate

5. Press [SET/%]

Printing models (except HR-8TE):

1. Have calculator in "print" mode

2. Press [CA]

3. Hold [SET/%] key for about 3 seconds

4. Input the tax rate

5. Press [TAX+]

6. Press [SET/%]

^Top

Enter only the numerals, not the letters.

^Top

The attached chart shows comparisons of the different calculator models. This includes graphing, scientific and printing calculators. download the chart here

^Top

The HR-8TE/HR-8TM have a [DEC] key with F, 0, 2, and 5/4 over it, while many other calculators models have a switch labeled [F CUT 5/4].

The button or switch can control rounding off to a certain number of decimal places. F is floating point (no F indicator on screen), 0 rounds off to 0 places after decimal point, and 2 rounds off to 2 places after decimal point.

The 5/4 applies to either the 0 or 2 modes, and describes the type of rounding off that is performed. The calculator will round down if the digit after the one you are rounding to is 4 or lower, and round up if the digit is 5 or higher.

^Top

This switch is used to determine how many decimal places your answer is displayed in.

ADD (2) is often used for monetary calculations, so that it is not necessary to enter the decimal point. It is automatically placed two decimal places from the end for cents. For example, entering 123 will display as 1.23.

^Top

This is a markup on price procedure. The formula is as follows:

Markup%=(Markup Price-Cost)/(Markup Price)

^Top

Make sure that you are following the correct procedure.

Adding 10%: 200 [×] 10 [%] [+]

Subtract 10%: 200 [×] 10 [%] [-]

^Top

AP Calculus requires a graphing calculator.

Any graphing or scientific calculator is permitted on the following as long as it does not have a QWERTY keyboard, electronic writing pad or a pen-input/stylus-driven interface:

PSAT/NMSQT, SAT I

SAT II Math, IC & IIC

AP Statistics (graphing expected)

AP Chemistry

AP Physics

May 27, 2011 | Casio Parts Cash Register PC Desktop

TI-5045 SV

ii

English.............................................................. 1

Fran?ais ............................................................ 6

Espa?ol ............................................................. 11

Portugu?s ........................................................... 16

Examples, exemples, ejemplos, exemplos .............................. 21

ILLUSTRATIONS Â¦ FIGURES Â¦ ILUSTRACIONESÂ¦ ILUSTRA??ES

Removable tab

Languette

Leng?eta extracci?n

Alavanca usada para o rolo

Ink roller

Rouleau encreur

Tamp?n de tinta

Cartucho de tinta

1

English

Your Texas Instruments calculator has a built-in printer for producing a permanent record printout of

your calculations with negative numbers printed in red. A big, easy-to-read display also enables you to

check entries or perform quick calculations without printing.

GETTING STARTED

OFF ON PRT IC GT

POWER

1. Connect the calculator to a proper power outlet (110-120V or 220-240V

where available).

2. The calculator is turned on by setting the POWER switch to the PRT

position.

Inserting the paper (see illustrations 1, 2, 3, and 4 on page ii).

1. Turn on the calculator.

2. Open the printer compartment cover by pressing down on its front edge and sliding it back in the

direction of the arrow.

3. Fit the roll of paper on the holder so that it unrolls from the bottom, with the loose end toward the

calculator.

4. Cut the end of the paper squarely and insert it firmly into the printer slot on the back of the

calculator.

5. Press & until the paper is in the printing position.

Replacing the ink roller (see illustrations 5 and 6 on page ii)

1. Turn the calculator off and tear off the excess paper.

2. Remove the printer cover by pressing down on both sides of the front edge and sliding back in the

direction of the arrow.

3. Remove the old ink roller by lifting it with the removal tab.

4. Insert the new ink roller into the compartment and press down gently until it snaps into place. Close

the printer compartment.

Note: The old ink rollers should not be refilled. Replacement rollers can be obtained from your local

retailer. The warranty does not cover ink roller replacement.

2

SELECTION SWITCH SETTINGS

OFF ON PRT IC GT

POWER ROUND

: 5/4 9 + F 0 2 3

DECIMAL

4

TAX

SET CALC

Set the POWER, ROUND, DECIMAL and TAX switches as required.

Note: The TAX switch is spring-loaded to return to CALC when it is moved to SET and released.

The switch settings are summarized in the following table:

SWITCH SETTING FUNCTION

POWER ON

PRT

IC

GT

No printout is provided; however, the display can be printed by pressing

4.

The printer provides a printout of your calculations but does not count them.

The printer is on and an item count of additions and subtractions to or from

the register is printed when sub-totaled or totaled.

The GT position controls whether or not the totals from the independent add

register are accumulated in the grand total register.

ROUND Rounds the result of a calculation to the selected number of decimal places.

:

5/4

9

Truncates the result to the selected number of decimal places.

Rounds the result up or down according to its value. For example, when the

DECIMAL switch is set to 2, the result is rounded up if the third decimal

position is 5 or more and rounded down if it is 4 or less.

Rounds the result up to the selected number of decimal places.

Ex. 220 P 6

Setup: PRINTER: PRT, ROUND: :

DECIMAL: 2, TAX: CALC

Ex. 220 P 6

Setup: PRINTER: PRT, ROUND: 5/4

DECIMAL: 2, TAX: CALC

Press Display Printout Press Display Printout

2 0. 0Â¦ C

220 ' 220. 220Â¦ P

6 3 36.66 6Â¦ =

36Â¦66 ?

2 0. 0Â¦ C

220 ' 220. 220Â¦ P

6 3 36.67 6Â¦ =

36Â¦67 ?

DECIMAL + Add mode: All results are given with two decimal places. For addition and

subtraction only, a decimal point is automatically placed to the left of the last

two digits entered, unless the number already includes a decimal point.

F Floating mode: Any results are displayed and printed with the maximum

number of decimal places.

0 2 3 4 Fixed decimal mode: Sets the number of decimals to 0, 2, 3, or 4.

3

TAX SET

CALC

Lets you enter a tax rate to perform tax calculations.

Stores the tax rate. Pressing ! or " after a tax rate has been entered,

adds/subtracts the stored tax rate to/from the value in the display.

Ex. VAT = 17.5 %

100 + VAT

Ex. VAT = 17.5 %

235 - VAT

Setup: PRINTER: PRT, DECIMAL: F, ROUND: 5/4, TAX: CALC

Move and hold the TAX switch to SET. Press 217 L 5 and release the TAX switch. It

automatically returns to CALC. 17.5% is printed.

Press Display Printout Press Display Printout

2 0. 0Â¦ C

100! 117.5 100Â¦

17Â¦5 @

117Â¦5 ?

2 0. 0Â¦ C

235" 200. 235Â¦

N35Â¦ @

200Â¦ ?

Note: The most common setup is POWER: PRT, ROUND: 5/4, DECIMAL: 2, TAX: CALC. Use these

positions for the examples unless other settings are given.

KEY DESCRIPTIONS

Basic keys

I Clear Entry: Clears an entry, enabling you to enter another number in its place. Note

that this key does not clear the add register.

2 Clear Key: Clears the add register, any pending operations, and the display. 0.C is

printed. Does not clear the memory.

( Right Shift: Deletes the right-most digit entered from an entry before an operation key is

pressed. Shifts the remaining digits one place to the right.

L Decimal Point: Enters a decimal point.

4 Date/Non-Add: Prints a date (such as 12Â¦10Â¦96) or a number for reference purposes.

Does not affect calculations. This entry is printed on the left side of the printout, the date

or number preceded by the # sign.

& Paper Advance: Advances the printing paper.

Addition and subtraction keys

9 Add: Adds a number to the add register. Displays the cumulated result.

: Subtotal: Gives the intermediate total from the add register. Using this key does not

affect the contents of the add register.

. Subtract: Subtracts a number from the add register. Displays the cumulated result.

E Total: Gives the total from the add register, and then clears the register.

4

Multiplication, division, percent and margin keys

? Multiply: Multiplies the number in the display by the next value entered.

' Divide: Divides the number in the display by the next value entered.

3 Equals: Completes any pending multiplication or division operation.

> Percent: Calculates percentages, ratios, add-ons (e.g. of VAT), or discounts.

# Gross Profit Margin: Calculates the selling price of an item when its cost and gross

profit (or loss) margin are known; also used to obtain a price excluding VAT.

Ex.

Cost: 594

Profit margin: 40%

Press:2 594 # 40 3

Answer:

Selling price: 990

Gross profit: 396

Ex.

Selling price including VAT: 252

VAT %: 20%

Press: 252 # 20 . 3

Answer:

Selling price excluding VAT: 210

VAT: 42

/ Grand Total: Gives the grand total of the operations previously performed and stored in the

Grand Total register. Every time a total is obtained with E it is cumulated into this register

(printout shows G+) which is only cleared when / is pressed twice. During long

calculations, if / is not used, this re

ii

English.............................................................. 1

Fran?ais ............................................................ 6

Espa?ol ............................................................. 11

Portugu?s ........................................................... 16

Examples, exemples, ejemplos, exemplos .............................. 21

ILLUSTRATIONS Â¦ FIGURES Â¦ ILUSTRACIONESÂ¦ ILUSTRA??ES

Removable tab

Languette

Leng?eta extracci?n

Alavanca usada para o rolo

Ink roller

Rouleau encreur

Tamp?n de tinta

Cartucho de tinta

1

English

Your Texas Instruments calculator has a built-in printer for producing a permanent record printout of

your calculations with negative numbers printed in red. A big, easy-to-read display also enables you to

check entries or perform quick calculations without printing.

GETTING STARTED

OFF ON PRT IC GT

POWER

1. Connect the calculator to a proper power outlet (110-120V or 220-240V

where available).

2. The calculator is turned on by setting the POWER switch to the PRT

position.

Inserting the paper (see illustrations 1, 2, 3, and 4 on page ii).

1. Turn on the calculator.

2. Open the printer compartment cover by pressing down on its front edge and sliding it back in the

direction of the arrow.

3. Fit the roll of paper on the holder so that it unrolls from the bottom, with the loose end toward the

calculator.

4. Cut the end of the paper squarely and insert it firmly into the printer slot on the back of the

calculator.

5. Press & until the paper is in the printing position.

Replacing the ink roller (see illustrations 5 and 6 on page ii)

1. Turn the calculator off and tear off the excess paper.

2. Remove the printer cover by pressing down on both sides of the front edge and sliding back in the

direction of the arrow.

3. Remove the old ink roller by lifting it with the removal tab.

4. Insert the new ink roller into the compartment and press down gently until it snaps into place. Close

the printer compartment.

Note: The old ink rollers should not be refilled. Replacement rollers can be obtained from your local

retailer. The warranty does not cover ink roller replacement.

2

SELECTION SWITCH SETTINGS

OFF ON PRT IC GT

POWER ROUND

: 5/4 9 + F 0 2 3

DECIMAL

4

TAX

SET CALC

Set the POWER, ROUND, DECIMAL and TAX switches as required.

Note: The TAX switch is spring-loaded to return to CALC when it is moved to SET and released.

The switch settings are summarized in the following table:

SWITCH SETTING FUNCTION

POWER ON

PRT

IC

GT

No printout is provided; however, the display can be printed by pressing

4.

The printer provides a printout of your calculations but does not count them.

The printer is on and an item count of additions and subtractions to or from

the register is printed when sub-totaled or totaled.

The GT position controls whether or not the totals from the independent add

register are accumulated in the grand total register.

ROUND Rounds the result of a calculation to the selected number of decimal places.

:

5/4

9

Truncates the result to the selected number of decimal places.

Rounds the result up or down according to its value. For example, when the

DECIMAL switch is set to 2, the result is rounded up if the third decimal

position is 5 or more and rounded down if it is 4 or less.

Rounds the result up to the selected number of decimal places.

Ex. 220 P 6

Setup: PRINTER: PRT, ROUND: :

DECIMAL: 2, TAX: CALC

Ex. 220 P 6

Setup: PRINTER: PRT, ROUND: 5/4

DECIMAL: 2, TAX: CALC

Press Display Printout Press Display Printout

2 0. 0Â¦ C

220 ' 220. 220Â¦ P

6 3 36.66 6Â¦ =

36Â¦66 ?

2 0. 0Â¦ C

220 ' 220. 220Â¦ P

6 3 36.67 6Â¦ =

36Â¦67 ?

DECIMAL + Add mode: All results are given with two decimal places. For addition and

subtraction only, a decimal point is automatically placed to the left of the last

two digits entered, unless the number already includes a decimal point.

F Floating mode: Any results are displayed and printed with the maximum

number of decimal places.

0 2 3 4 Fixed decimal mode: Sets the number of decimals to 0, 2, 3, or 4.

3

TAX SET

CALC

Lets you enter a tax rate to perform tax calculations.

Stores the tax rate. Pressing ! or " after a tax rate has been entered,

adds/subtracts the stored tax rate to/from the value in the display.

Ex. VAT = 17.5 %

100 + VAT

Ex. VAT = 17.5 %

235 - VAT

Setup: PRINTER: PRT, DECIMAL: F, ROUND: 5/4, TAX: CALC

Move and hold the TAX switch to SET. Press 217 L 5 and release the TAX switch. It

automatically returns to CALC. 17.5% is printed.

Press Display Printout Press Display Printout

2 0. 0Â¦ C

100! 117.5 100Â¦

17Â¦5 @

117Â¦5 ?

2 0. 0Â¦ C

235" 200. 235Â¦

N35Â¦ @

200Â¦ ?

Note: The most common setup is POWER: PRT, ROUND: 5/4, DECIMAL: 2, TAX: CALC. Use these

positions for the examples unless other settings are given.

KEY DESCRIPTIONS

Basic keys

I Clear Entry: Clears an entry, enabling you to enter another number in its place. Note

that this key does not clear the add register.

2 Clear Key: Clears the add register, any pending operations, and the display. 0.C is

printed. Does not clear the memory.

( Right Shift: Deletes the right-most digit entered from an entry before an operation key is

pressed. Shifts the remaining digits one place to the right.

L Decimal Point: Enters a decimal point.

4 Date/Non-Add: Prints a date (such as 12Â¦10Â¦96) or a number for reference purposes.

Does not affect calculations. This entry is printed on the left side of the printout, the date

or number preceded by the # sign.

& Paper Advance: Advances the printing paper.

Addition and subtraction keys

9 Add: Adds a number to the add register. Displays the cumulated result.

: Subtotal: Gives the intermediate total from the add register. Using this key does not

affect the contents of the add register.

. Subtract: Subtracts a number from the add register. Displays the cumulated result.

E Total: Gives the total from the add register, and then clears the register.

4

Multiplication, division, percent and margin keys

? Multiply: Multiplies the number in the display by the next value entered.

' Divide: Divides the number in the display by the next value entered.

3 Equals: Completes any pending multiplication or division operation.

> Percent: Calculates percentages, ratios, add-ons (e.g. of VAT), or discounts.

# Gross Profit Margin: Calculates the selling price of an item when its cost and gross

profit (or loss) margin are known; also used to obtain a price excluding VAT.

Ex.

Cost: 594

Profit margin: 40%

Press:2 594 # 40 3

Answer:

Selling price: 990

Gross profit: 396

Ex.

Selling price including VAT: 252

VAT %: 20%

Press: 252 # 20 . 3

Answer:

Selling price excluding VAT: 210

VAT: 42

/ Grand Total: Gives the grand total of the operations previously performed and stored in the

Grand Total register. Every time a total is obtained with E it is cumulated into this register

(printout shows G+) which is only cleared when / is pressed twice. During long

calculations, if / is not used, this re

Jan 16, 2011 | Office Equipment & Supplies

Check this HP FAQ:

Setting a Fixed Decimal Place You can download the manual and user guides for your calculator from here:

http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&dlc=en&cc=us&product=81575&lang=en&

For more information, Faqs & how-Tosgo the HP support homepage for your calculator:

http://h10025.www1.hp.com/ewfrf/wc/product?lc=en&dlc=en&cc=us&lang=en&product=81575&

Introduction This document describes how to set the desired number of decimal places on the HP 12c calculator in standard format. It also covers how to enter a number in scientific notation. Instructions for standard format

Introduction This document describes how to set the desired number of decimal places on the HP 12c calculator in standard format. It also covers how to enter a number in scientific notation. Instructions for standard format

Setting a Fixed Decimal Place You can download the manual and user guides for your calculator from here:

http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&dlc=en&cc=us&product=81575&lang=en&

For more information, Faqs & how-Tosgo the HP support homepage for your calculator:

http://h10025.www1.hp.com/ewfrf/wc/product?lc=en&dlc=en&cc=us&lang=en&product=81575&

Introduction This document describes how to set the desired number of decimal places on the HP 12c calculator in standard format. It also covers how to enter a number in scientific notation. Instructions for standard format

- Press and release .
- Press the number key for the desired number of decimal places to be displayed to the right of the decimal point (0 through 9). The calculator displays a maximum of 10 digits.

Introduction This document describes how to set the desired number of decimal places on the HP 12c calculator in standard format. It also covers how to enter a number in scientific notation. Instructions for standard format

- Press and release .
- Press the number key for the desired number of decimal places to be displayed to the right of the decimal point (0 through 9). The calculator displays a maximum of 10 digits.

Aug 24, 2009 | HP 12c Calculator

I found this solution on the HP website. Turn it on, and do what it says. Then turn it off and back on again, and the extra decimal places should show.

http://h10025.www1.hp.com/ewfrf/wc/document?dlc=en&lc=en&cc=us&docname=bpia5183

- Press and release the gold PREFIX key (f).
- Press the number key for the desired number of decimal places (0 through 9).

Mar 25, 2009 | HP 12c Calculator

2ND [FIX] 4

Jan 14, 2009 | Texas Instruments TI-30XA Calculator

Try pushing and releasing [f], then [4]. This will give you 4 decimal places. (It follows that if you want 5 decimal places, push 5 instead of 4, etc). If that doesn't work, you can try taking the batteries out and putting them back in which should reset it to 2 decimal places, then set it where you want it following the above.

If it continues to malfunction I suggest taking the batteries out for 24 hours to allow a static discharge. This will lose anything you stored in the calculator, setting it back to how it came from the factory.

If it continues to malfunction I suggest taking the batteries out for 24 hours to allow a static discharge. This will lose anything you stored in the calculator, setting it back to how it came from the factory.

Nov 29, 2007 | HP 12c Calculator

69 people viewed this question

Usually answered in minutes!

×