Question about Samsung Televison & Video

1 Answer

I have a SAMSUNG 58" 1080p Plasma HDTV FP-T5884. I can still switch the TV on but the screen shows pink bars no mater which source is selected. This video from a guy on youtube shows exactly the same on screen problem. https://www.youtube.com/watch?v=-3gq8AuHO2s. Does anyone has a solution? Thanks.

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

That is a typical case of poor/weak signal getting to the display via the FFC, either is a poor (or NO) contact problem, or a defective FFC.Look for the Flat Film Cable looking similar to the one in the picture, and make sure no pinching/broken traces. And/or confirm the conection at each side. Good Luck!
I have a SAMSUNG 58

Posted on Mar 30, 2015

Testimonial: "Thank you for your help. The technician guy who came to my house said I would have to change the entire screen... It is possible that the FFC is defective but I doubt that it is pinched. Thank you again."

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

Input Switching issues Harmony Remote and Samsung TVs


The following 2008 Samsung TV’s have Anynet+:

LCD
All 9 Series LCD TVs (LNxxA950)
All 8 Series LCD TVs (LNxxA850, LNxxA860)
All 7 Series LCD TVs (LNxxA750)
Most of the 6 Series LCD TVs (LNxxA650, LNxxA630) excluding the 19” and 22” models
All of the 5 Series LCD TVs (LNxxA550, LNxxA540, LNxxA530)
Most of the 4 Series LCD TVs (LNxxA450) excluding the 19”, 22”, and 26” models

Plasma
All 7 Series Plasma TVs (PNxxA750, PNxxA760)
All 6 Series Plasma TVs (PNxxA650)
All 5 Series Plasma TVs (PNxxA550, PNxxA530)
Half of the 4 Series Plasma TVs (PNxxA450) excluding the 410 line (PNxxA410)

DLP
All 7 Series DLP TV’s (HLxxA750)
All 6 Series DLP TV’s (HLxxA650)
All 5 Series DLP TV’s (HLxxA510)

2007 Samsung TVs With Anynet+
The following 2007 Samsung TVs have Anynet+:

Note: Excluding all 26" models and below.

LCD
All 81F series (LN-Txx81F)
All 71F series (LN-Txx71F)
All 65F series (LN-Txx65F)
All 61F series (LN-Txx61F)
All 53H series (LN-Txx53H)

Plasma
FP-T5084
FP-T6374
HP-T4254
HP-T4264
HP-T5054
HP-T5064

DLP
All 89S series
HL-Txx89S
HL-T7288W

Information on Samsung TVs that support AnyNet has been refered to from: http://ars.samsung.com/customer/usa/jsp/faqs/faqs_view.jsp?isARS=Y&SITE_ID=1&AT_ID=18104&ARS_ID=8514159

How To Disable Samsung Anynet+ so your Harmony Remote Control properly controls your devices. This mainly impacts Input Switching.

1) Press your Tools Button.
2) Scroll down to Anynet and press your Select Button.
3) Once on the Anynet screen, please press your Left/Right Button(s) to select the Off Setting on the Anynet+ (HDMI-CEC)
4) Scroll down to the Auto Turn Off and select No.

Once this is completed, please turn off your TV and all device and power them back on using the Harmony Remote. Also please test this in the Activities mode, if this does not work, let me know

on Feb 10, 2010 | Logitech Harmony 520 LCD Remote Control

Tip

Input Switching Issues with Harmony and Samsung TV's


The following 2008 Samsung TV’s have Anynet+:

LCD
All 9 Series LCD TVs (LNxxA950)
All 8 Series LCD TVs (LNxxA850, LNxxA860)
All 7 Series LCD TVs (LNxxA750)
Most of the 6 Series LCD TVs (LNxxA650, LNxxA630) excluding the 19” and 22” models
All of the 5 Series LCD TVs (LNxxA550, LNxxA540, LNxxA530)
Most of the 4 Series LCD TVs (LNxxA450) excluding the 19”, 22”, and 26” models

Plasma
All 7 Series Plasma TVs (PNxxA750, PNxxA760)
All 6 Series Plasma TVs (PNxxA650)
All 5 Series Plasma TVs (PNxxA550, PNxxA530)
Half of the 4 Series Plasma TVs (PNxxA450) excluding the 410 line (PNxxA410)

DLP
All 7 Series DLP TV’s (HLxxA750)
All 6 Series DLP TV’s (HLxxA650)
All 5 Series DLP TV’s (HLxxA510)

2007 Samsung TVs With Anynet+
The following 2007 Samsung TVs have Anynet+:

Note: Excluding all 26" models and below.

LCD
All 81F series (LN-Txx81F)
All 71F series (LN-Txx71F)
All 65F series (LN-Txx65F)
All 61F series (LN-Txx61F)
All 53H series (LN-Txx53H)

Plasma
FP-T5084
FP-T6374
HP-T4254
HP-T4264
HP-T5054
HP-T5064

DLP
All 89S series
HL-Txx89S
HL-T7288W

Information on Samsung TVs that support AnyNet has been refered to from: http://ars.samsung.com/customer/usa/jsp/faqs/faqs_view.jsp?isARS=Y&SITE_ID=1&AT_ID=18104&ARS_ID=8514159

How To Disable Samsung Anynet+ so your Harmony Remote Control properly controls your devices. This mainly impacts Input Switching.

1) Press your Tools Button.
2) Scroll down to Anynet and press your Select Button.
3) Once on the Anynet screen, please press your Left/Right Button(s) to select the Off Setting on the Anynet+ (HDMI-CEC)
4) Scroll down to the Auto Turn Off and select No.

Once this is completed, please turn off your TV and all device and power them back on using the Harmony Remote. Also please test this in the Activities mode, if this does not work, please e-mail us back for further assistance.

on Feb 10, 2010 | Logitech Harmony 880 LCD Remote Control

1 Answer

My Samsung FPT5084 50 Inch Plasma TV....keeps turning itself on and off. Does a solution exist to my problem. I am out of warranty,


http://www.retrevo.com/support/Samsung-FP-T5084-TVs-manual/id/2839bh444/t/2/
http://www.samsung.com/us/support/detail/supportPrdDetail.do?menu=SP01&prd_ia_cd=02010200&prd_mdl_cd=&prd_mdl_name=FP-T5084
Below is the service manual link from epox. ftp://ftp.epox.com/downloads/Manual/mu-8KDA3J&+11.pdf

This is usually a switchmode power supply problem, and it's shutting down, for safety reasons, so as to avoid a fire and explosion or both. Realistically you need to get a "Quote" from an authorised service agent, for repair.

May 24, 2010 | Samsung FPT5084 50 in. Plasma HDTV

2 Answers

Samsung FP-T5084 No picture


For a 50 inch plasma....its worth it, in my opinion y-boards cost around $149 to $189

Nov 03, 2009 | Samsung FPT5084 50 in. Plasma HDTV

1 Answer

I have the Samsung FP-T5084 50" Plasma tv. I went to turn it on the other day, and it wouldn't turn on. No clicking. No red power indicator light. Nothing. It was plugged into a power strip with other...


Could be the PCB, but it is hard to say. I am looking for one that has a good screen since mine got cracked (don't ask LOL) so if you are interested in selling it let me know.

Thanks!

yrk2.7t AT (replace with @ symbol) gmail.com

Oct 25, 2009 | Samsung FPT5084 50 in. Plasma HDTV

1 Answer

When Playing Halo 3... The Screen Shrinks Down...


kyleolver,
16:9 is the widescreen mode, the other size is 4:3 ratio which is what the game's native size, it is picture boxing by the plazma is showing the size as not to distort the image, to get the full screen picture, but make sure it's not the plazma's setting first - where it selects the size of the image, you may have the streched version on your normal play.
randy320sgi

Dec 21, 2008 | Samsung HP-R4272 42 in. Plasma HDTV

1 Answer

Blown Picture


There is not much you can do to fix your plasma. Since the plasma is less then 1 year old, still under Samsung warranty.
I would suggest to call them to fix it.
Good luck.

Aug 18, 2008 | Samsung FP-T5884 58 in. Plasma Television

1 Answer

New Samsung Plasma HDTV


That is what is called BURN IN or as the manufactures call it "IMAGE RETENTION". Basicly what this means it that you have been putting more hours on the part that is darker the smaller part, or the 4x3 picture or the square part. And, basicly the part that appears to be lighter is "LESS" worn out than the other part of the plasma tv. There is no fix for the problem, But if you go into the menu and select "BURN-IN" OR "Pattern sweep" or WHITE Screen than you will see exactly what i mean. Now, you can keep it on this pattern overnight if you would like, but i suspect it will not cure the problem, but lessen the effects of it. But keep in mind, you are reducing the life of the complete panel when you do this. Not that it is bad to do this. If you have anymore questions don't hesitate to ask anymore questions. The better fix is to Switch over to the "Dish Network and than you can format the screen on any channel in any mode. Superior product to cable. Have a great day. And watch out for the snow storm coming. GURU JAY

Mar 18, 2008 | Samsung HP-T5064 50 in. Plasma HDTV

1 Answer

Samsung 42" plasma hdtv


Black bars to pink dots are all symptoms of the logic board failing. Samsung p/n# BN96-02042A and this isn't a repair for the novice. The board itself contains many small smd caps that are the likely culprits. But the fine wire traces on this board make replacing the caps nearly impossible without some very sophisticated smd removal equipment and a magnifier that could double as a hubble telescope. Most shops merely replace the board. They're about $180 plus shipping and core charges. If you want to price it goto vance baldwin's site https://www.vancebaldwin.com and enter as a guest. Select parts and enter the part number above. It's about 1-2 hour install and re-assemble barring any complications. Find a reputable shop and take the unit in yourself. That will help keep the cost down, but expect that this one will cost in the neighborhood of $375 - $450 and could run higher if anything else is found wrong. If you need some help finding a good shop try NESDA, National Electronic Service Dealer's Assn., for a member shop near you. http://www.nesda.com/locator/state_search.php Good Luck Bill

Jun 08, 2007 | Samsung SP-R4232 42 in. Plasma HDTV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74459 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...