To watch i get a message saing my e male and pass word are not wright but they are what can i do to get in

Hi, Anonymous at ang karaniwang suspects ay ang mga: 1. fouled spark plugs. 2. Malubhang discharged o isang nasira baterya, ay dapat magkaroon 12.5 volts o mas mahusay at maaari able sa pumasa sa isang load test kung kinakailangan. 3. Suriin baterya terminal para sa pinsala o kaagnasan, i-check ang mga cable baterya sa "KAPWA" ay nagtatapos para maluwag, corroded, o nasirang connectors, "SA LOOB" at sa labas ng cable harness, magsagawa connector wiggle test at i-check cables na may isang ohmmeter kung kinakailangan. 4. Loose koneksyon sa pag-aapoy likawin o plug sa pagitan ignition sensor at CDI box. 5. Spark plug cable nasa di magandang kondisyon, shorting / tagas, spark plug cable na koneksyon maluwag, suriin para sa spark tagas sa dilim. 6. Ang maling pag-aapoy likawin, pick up coil, trigger coil o CDI kahon pagsubok pangangailangan upang maging checked sa isang ohmmeter sa 70 degrees Fahrenheit 7. Ang maling kaligtasan switch klats, kickstand, neutral, off / on etc. 8. Ang maling pag-aapoy switch. Good luck at magkaroon ng isang magandang araw.

there is NO hdmi on that unit,
http://service.us.panasonic.com/OPERMANPDF/SAHT830V.pdf
this is the only "odd" cable that goes to it,it is the woofer cable,
PANASONIC Home Theater Subwoofer Cable System Cable 13 ft

Just go to Radio Shack and buy a 1/8 male stereo cable and the other end with 2 male RCA plugs and connect them to the AUX or CD input of your receiver, the 1/8 male connector goes to your earphones output of your laptop, hope it helps.

how to change password my kos

Hi, Ivanhinuguin at ang karaniwang suspects ay ang mga: 1. Ignition Lumipat wala sa "ON" posisyon. 2. Engine Run Lumipat sa "OFF" na posisyon. 3. Discharged baterya, mga pangangailangan upang maging 12.5 volts o mas mahusay at maaari able sa pumasa sa isang load test kung kinakailangan. 4. Lagyan ng check ang mga terminal ng baterya para sa pinsala o kaagnasan-check ang cable baterya sa "KAPWA" ay nagtatapos para maluwag, corroded, o nasirang connectors, "SA LOOB" at sa labas ng cable harness, magsagawa connector wiggle test at i-check cables na may isang ohmmeter kung kinakailangan. 5. Tip sa paglipas ng sensor ay nangangailangan ng isang pag-reset. 6. Ang maling pag-aapoy switch. 7. Ang maling starter button. 8. Ang maling kickstand o clutch pull sa switch / sensor. 9. Starter control circuit, relay, o solenoyde may depekto. 10. Main fuse o circuit breaker ay maaaring tinatangay ng hangin o may sira. 11. Suriin para sa engine pag-code. Para sa karagdagang impormasyon tungkol sa iyong isyu at mahalagang "LIBRE" download na kakailanganin mo paki-click ang link sa ibaba. Good luck at magkaroon ng magandang sa isang araw. 2007 Yamaha YZF R6 Service Manual R6 Moto Data Project
http://www.r6-forum.com/forums/57-garage-mechanical-help/152797-2002-r6-starts-starter-button-doesnt-work.html
http://www.r6messagenet.com/forums/r6-maintenance-technical/134796-ignition-button-not-working.html
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

i have a stauer 33 watch i can not get the pin to come out so i can set the date and time it is like it is stuck or am i not doing it wright. thanks for your help

on Some printer, we can easly see male port of pawer cable. But in some we can not se e easly it, becuse it is coverd by cover of printer. but there is amsall hole. so look left and wright and back yhanks

Hi, I have the Panasonic SA-EN9, and if you plug your mp3 player (I have and ipod) into the auxiliary socket you should be able to play it by pressing the AUX button on the remote provided. 
Hope It Helps :)

when turn on receiver , after few seconds got message
F70. when wants to do any operation with receiver got message SWITCH POWER OFF