Question about Radio Communications

Open Question

What is the frequency range on a Bearcat scanner model bc155,and how is it programed?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Mechanic688
  • 204 Answers

SOURCE: programing for uniden bearcat scanner bc 144xl

danval, I looked up a pic of your scanner and it is pretty straightforward. If it is the 16 channel I was looking at, here is the step by step programming.
1- Push manual button to go to the channel you want to start programming.
2- Enter the freq number in.
3- Push the E button to enter it in the memory.
4- To review what you programmed, push the Review button.
5- Use manual button to step to next channel and start over from #2
That should get you started with the scanning hobby.
The scanner has a Priority button that when activated will stop scanning and go immediatly to the priority channel if someone keys their mic.
If you need freq's (or more of) for your area, go here and click on your state and county and it'll give you a complete listing.
http://www.radioreference.com/apps/db/
Hope this helps you out, let us know,, Mechanic

Posted on Feb 12, 2008

smarthome2
  • 1114 Answers

SOURCE: How do I Program my Uniden Bearcat BC60XLT

Here's the link for your manual It's 3.71mb http://www.uniden.com/pdf/BC60XLT-1om.pdf . The manual is written for "People" not "engineers" If you still have problems, post a reply and I can help further. Hope this helps

Posted on Jun 02, 2009

  • 1 Answer

SOURCE: How do I Program my Uniden Bearcat BC60XLT

how do I program bc60xlt handheld scanner

Posted on Jun 08, 2009

BillB-SA
  • 2761 Answers

SOURCE: how to program and delete uniden bearcat scanner 210 XWneed to c

I can't locate information specific to the 210XW, but hopefully this generic Bearcat programming info will help:

1. Press the MANUAL key to advance to the channel that you wish to reprogram.

2. Enter the new frequency, including decimal point.

3. Press the ENTER or E key.

4. Start over with step one to continue programming channels.

Posted on Aug 16, 2009

BillB-SA
  • 2761 Answers

SOURCE: need a starter frequency guide

The best frequency database is at

www.radioreference.com

Posted on Aug 16, 2009

Testimonial: "thanks that worked!"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need scanner frequencies for uniden bearcat bc60xlt-1


Trying to program codes in old scanner - The RadioReference.com Forums

forums.radioreference.com > ... > New User / Getting Started Forum

Jun 1, 2009 - 4 posts
I have an old Uniden Bearcat model:bc60xlt-1. I just created an account on radioreference and hopefully you guys can help me out, the ... uniden barcat bc60xlt
7 posts
Mar 17, 2013
The Betty Bearcat starter frequency guide?
3 posts
Feb 22, 2009
Analog Police/Fire Frequencies
9 posts
Sep 14, 2007
Uniden Bearcat BC60XLT-1
10 posts
Dec 18, 2004
More results from forums.radioreference.com

UNIDEN BC60XLT-1 USER MANUAL Pdf Download.

www.manualslib.com > Brands > Uniden Manuals > Radio > BC60XLT-1

Jan 14, 2016 | Uniden Radio Communications

1 Answer

I have a Uniden Bearcat 30 Channel 10 Band Radio Scanner how do I program it when I put in the number it shows error


The ERROR message usually indicates that you've tried to program a frequency outside the scanner's tuning range. The BC60XLT top tuning range is the 512 MHz band, so you cannot tune any 800 MHz frequencies. For further information you can download and print the factory manual, at no cost, here:

http://www.uniden.com/pdf/BC60XLTom.pdf

Bill B.
Listening in since the 60's

Apr 01, 2011 | Uniden BC60XLT Handheld Scanner

1 Answer

I have a uniden bearcat scanner model#bc148xlt and it seems to not want to take the local frequencys and it comes up error when you hit the enter or e button


You didn't mention what frequencies you're trying to program. BC148XLT coverage ends at 512 MHz, so you will get the error message if you try to program anything above that. Also, you must be sure to include the decimal point when programming a frequency into the scanner. I hope this helps.

Need the manual for your scanner? You can download/print it here:

http://www.radiopics.com/1.%20Manuals/Bearcat/Bearcat%20BC148XLT%20%28Manual%29.pdf

For a comprehensive database of active frequencies in your area, visit:

www.RadioReference.com

Bill B

May 20, 2010 | Radio Communications

1 Answer

How to program the frequencies on a uniden bearcat 50 channel 800 mhz radio scanner?


To program the majority of non-trunking Bearcat scanners,\:

- Power the scanner ON
- Press MANUAL to stop scanning
- Enter the channel # to program followed by MANUAL (OR just press MANUAL repeatedly to advance to the desired channel).
- Enter the desired frequency, including the decimal point.
- Press E (ENTER)

If these steps don't work with your scanner, please provide your model number and I'll get back to you with specifics.

Bill B

Apr 08, 2010 | Uniden BC60XLT-1 Handheld Scanner

1 Answer

Need to know how to put codes in


If your scanner is the BC350C (the section you posted in), here's a link to the owner's manual which will give you detailed programming information:

http://www.uniden.com/pdf/BC350Com.pdf

If you have a different model Bearcat scanner, try:

1. Push MANUAL to stop scanning and advance to the channel that you want to program.

2. Enter the desired frequency, including the decimal point (e.g., 156.015).

3. Press E or ENTER to set the frequency.

4. Repeat the process, starting with 1 above to select the channel.

NOTE: With some Bearcat scanners you may need to press the E or ENTER key before entering your frequency.

These are general steps that work on most recent Bearcat models. If they don't work on yours, try different variations. You can also check Uniden.com -- they may have an online manual that you can download and print.

Apr 25, 2009 | Uniden BC350C Base Scanner

1 Answer

I need help programing my scanner


Should have a button that reads "PROGRAM". Push it first, then enter your frequency (example 154.55). Then push button marked "ENTER".
Depending on the frequency range that you entered it will take it or state Error. Let me know how you do.

Feb 25, 2009 | Uniden BC60XLT-1 Handheld Scanner

1 Answer

How do I Program my Uniden Bearcat BC60XLT


how do I program bc60xlt handheld scanner

Aug 11, 2008 | Radio Communications

5 Answers

How to program a uniden bearcat bc 145xl 16 channel scanning radio


I'am having a problem. I do not have codes for a uniden bearcat 145 xl 16 channel, can someone help me please?

May 31, 2008 | Health & Beauty

4 Answers

Bearcat BC-210


The Bearcat 210 Manual specifically states that the lowest freq available is 32MHz.

Jan 04, 2008 | Uniden Bearcat Pro PC68XL 40-Channels Base...

Not finding what you are looking for?
Radio Communications Logo

Related Topics:

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1654 Answers

Brad Brown

Level 3 Expert

15557 Answers

Mike Charette

Level 3 Expert

1795 Answers

Are you a Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...