Question about Olympus Cameras

Open Question

How can I set the TTL ON THE FLASH GUN, AND WHAT f,STOP WOULD I SET FOR FILL IN FLASH WITH OUTSIDE PHOTOGRAPHY

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

neta
  • 852 Answers

SOURCE: Flash

Yes, the FL-CB05 Shoe Mount TTL flash cable will allow full TTL capability with the FL-40 flash off camera.

Posted on Aug 31, 2005

Quack
  • 542 Answers

SOURCE: Flash on ist DL

Looks like its true... Another major disadvantage. Removing TTL means removing one more hardware piece - TTL sensor. Pentax removed almost every nice feature, which needs some aditional or more expensive hardware: no TTL flash, less AF points, pentamirror... Seems like I bought Ds right in time.

Posted on Sep 08, 2005

  • 9 Answers

SOURCE: Canon SPEEDLITE 580EX TTL Flash Problem: Flash will not stay in ETTL mode

u can use the H sync button only with the camera set in semiautomatic or manual modes, it dosent work in AUTOmatic modes

Posted on Nov 18, 2007

  • 51 Answers

SOURCE: Nikon flash photography

The nice thing about digital is that it essentially costs you nothing but time to experiment with different settings and see what you like best and what works and what doesn't.
One thing I use a lot is the accessory cord that lets you get a flash off the camera while still having one on the camera. A little more money but giving more flexibility is the Pocket Wizard Plus digital remote control units. I can activate my flash from over 200 feet away (haven't tried it further). I have the D300 and SB800 with bounce card as my basic portable rig for candid shots.

Posted on Mar 09, 2008

  • 1 Answer

SOURCE: Samsung SEF-42A TTL Flash

wie ist das möglich das man dieses Blitzgerät nicht mehr bekommen kann

Posted on Oct 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Can the wansen trigger/receiver be used with canon 580ex?


The Wansen RF-602 for canon can.
Check what Wansen has to say. Eventually use Google to find what test sites like DPreview has to say about triggers.
Products Flash Trigger WanSen Photography

Jan 04, 2015 | Canon Cameras

1 Answer

After a time, it changes to being extremely bright no matter where I set it


had the same problem and after taking apart the base i realized there was a black (maybe optical) wire that was unplugged. Once I clipped it back it worked fine. check the thread here http://photography-on-the.net/forum/showthread.php?t=992635 last post

Jan 04, 2011 | Canon Speedlite 430EX TTL Flash

1 Answer

Ttl auto does not work


Digital Camera Fully Compatible, Newly Developed S-TTL System "S-TTL" enables TTL auto shooting by an external strobe for a digital SLR camera as well as for a point & shoot digital camera.
INON S-TTL auto strobe supports any manufactures' model providing highly accurate exposure control.
Film camera era without strobe selection problem TTL stands for "Through The Lens" and TTL auto strobe system controls flash amount to provide correct exposure based on calculation by camera's internal sensor metering reflecting strobe light from a subject through the lens. This TTL system meters actual light amount reflecting from a subject providing accurate exposure.
When we start with the history of underwater TTL auto strobe, underwater camera?"NIKONOS V" released in 1984 was the first to provide automatic TTL flash control for underwater strobe SB-102, SB-103 succeeded by NIKONOS V compatible underwater strobes form other manufactures. The 5 pin electrical sync connector for NIKONOS V is most popular and widely adopted to connect an underwater strobe and underwater film camera (underwater camera/housing).
A film SLR camera has flexibility to select an underwater strobe. As far as housing has NIKONOS type electrical sync connector and properly wired, automatic TTL flash control is usable with any TTL auto strobe like Nikon SB-105, INON Z-220, Z-22 connected via electrical sync cable.
NIKONOS type 5 pin electrical sync connector and NIKONOS V with INON Z-22 strobe
white1px.jpg
Film camera compatible strobe is not usable for a digital camera!? Underwater TTL strobe circumstances have been drastically altered with the spread of digital camera among divers. Some underwater housing for digital SLR camera has NIKONOS type electrical 5 pin sync connector as same as film camera housing. Since the housing has same NIKONOS type sync connector, existing film camera compatible underwater strobe has been considered compatible with a digital SLR camera via 5 pin sync cable but happened to experience error message on the digital camera or blackout on an image even the strobe worked. Why this happened?
This is because automatic TTL strobe system difference between a film camera and a digital camera.

The film TTL auto system makes single flash while digital TTL auto system employs pre-flash type making two to three flashes. Film TTL auto strobe system starts firing at the same time the shutter opens and reflecting strobe light from a subject is recived at a film. The reflecting light on the film is metered by the sensor to determine when to cease firing for correct exposure. This process takes only about 1/1000 second.
In contrast, digital TTL auto strobe system can not calculate adequate exposure based on reflecting light from a subject since image sensor (CCD/CMOS) reflectivity is comparably low comparing to a film. So digital TTL strobe system gives preliminary flash for very short period of time (pre-flash) just before the shutter opens metering reflecting light from a subject by the sensor to calculate necessary amount of light for correct exposure and starts emitting main flash at the same time the shutter opens. Canon E-TTL and Nikon i-TTL employs this system.

When we connect conventional film camera compatible TTL strobe to pre-flash type digital SLR via sync cable, the strobe makes full dump by pre-flash signal then the shutter opens before the strobe has been fully charged resulting in quite under exposed image only with ambient light. Even two time flash compatible strobe like INON Z-220 strobe, does not fully support a digital TTL and force to use Manual flash mode.





Film SLR:
A strobe starts firing at the same time the shutter opens and quenches firing when correct exposure has been obtained.
A film compatible TTL strobe connected to a pre-flash type digital SLR via electrical cable flashes does not support TTL auto exposure resulting in synchronization only with first pre-flash or totally uncontrollable.
white1px.jpg
The birth of digital fully compatible S-TTL S-TTL auto compatible INON D-2000 strobe and Z-240 strobe works in TTL auto mode by simply setting their main dial to S-TTL position. A film camera seems to depend more on photographer's skill, experience and feel since the camera does not allow checking images on site. A digital camera allows us to check images right after shooting and enable to try to shoot again as much as we like. And high capacity memory card further allows to shoot hundreds of images. The digital camera makes entry level of underwater photography getting down and nowadays more people buy a digital SLR camera and underwater housing even they have just started underwater photography. However underwater photography gets more difficult because underwater strobe does not work in TTL auto.
INON is among the first to support digital TTL auto system with "S-TTL" auto mode equipped D-2000 strobe and Z-240 strobe.
The proper name of S-TTL is "Optical Synch TTL". S-TTL enables to perform in TTL auto exposure as same as genuine TTL strobe from camera manufacture, based on camera's built-in flash light to use as a signal to be transmitted to a strobe. S-TTL uses digital camera's built-in flash light not as a light source but as like a controller to trigger S-TTL strobe.
The built-in flash of a digital camera makes weak flash (pre-flash) before main-flash to calculate exposure. This pre-flash is transmitted to S-TTL strobe to control the strobe to make pre-flash to a subject. The reflecting light from the subject goes through the camera's master lens to an image sensor then a processor calculates main flash light amount for correct exposure.?Finally the built-in flash makes main-flash which is transmitted to the S-TTL strobe to cause main-flash of the S-TTL strobe.


Digital camera's built-in flash lights are transmitted via an optical fiber to the
S-TTL strobe to make pre-flash and main-flash instead of the built-in flash.
white1px.jpg

Apr 30, 2010 | Olympus FL-20 TTL Flash

1 Answer

I changed the batteries and continued to take photos when i noticed that the screen was flashing on and off and then going to standby mode. tried resetting back to default but screen still flashes. flash...


Hi Bill,

You are not using this flash like a sub-machine gun, right?
Is your reachargeable batteries older than 15 months?

Try this:
Set to low power on flash, set flash to manual.
Remove flash from hotshoe.
Fire the flash by pushing the flash button for 3 mins, same problem(s)?

atdlee@netzero.com

Jan 17, 2010 | Nikon Speedlight SB-600 TTL Flash

1 Answer

Canon Macro Settings for 100mm lens and Sunpak 12R ring flash


Firstly, be sure to check flash voltage. Your 30D may accept max 6V so that your camera can be shot if the flash unit has higher voltage than 6V.
1. Use low ISO to keep low noise....around f/8 or more depends on your need and how much DOF you want.....Set the shutter speed around 1/125 to your max speed to stop any movement (your subject or camera itself shaking).
2. Above is set in Manual mode (iso100, f/8 1/125 or 1/250), then you just need to leave the flash to work in TTL mode.
3. It needs battery, the connection is for syncing to trigger and release a proper flash power (in TTL mode).
Hope this help!

Mar 26, 2009 | Sunpak DX-8R TTL Ring Light Flash

2 Answers

My sb 600 fires with the camera but it seems not illuminate


Definately a settings problem. The camera will only syncronize on one specific speed. Youe best bet is to use auto. For manual, you'll have to set the shutter speed at the sync speed.

Flash Sync Speed
  • up to 1/250 X-Sync Speed
  • up to 1/8000 FP High Speed Sync
  • Red-eye reduction
    Red-eye reduction with slow sync
    Rear-curtain sync
    Slow sync
    Front-curtain sync (normal) Flash Sync Modes
  • 1) i-TTL: TTL flash control by 1,005-pixel RGB sensor, built-in flash, SB-800, SB-600, SB-400: i-TTL balanced fill-flash and standard i-TTL flash
    2) AA (Auto Aperture-type) flash: Available with SB-800 used with CPU lens
    3) Non-TTL Auto: Available with Speedlights such as SB-800, 28, 27, and 22S
    4) Range-priority manual flash; available with SB-800 Flash Control
  • Mar 13, 2009 | Nikon Speedlight SB-600 TTL Flash

    1 Answer

    Non-syncing Olympus FL-36


    Hey I have an E510 and an fl 36 flash unit and no problems for a year now.
    And no problems at all {knock wood]!
    Have you checked to see if all the flash pins are making contact?
    Normally I only turn my flash on after I put it on the camera and then turn the camera off and then on again to see if everything is ok. I remember the flash would not communicate with the camera on a shoot and after a while I realized that the flash was not all the way in the hot shoe. Fool around with the flash off the camera first and see the flash have modes that you have to set up if the mode is set in full manual that might be a problem. There is a button that you have to hold down for three seconds to get in the menu. My buttons are fine and have not faded any at all. I realize that the power button an the flash is hard to press on, I do hope I was of help .GOOD LUCK


    From Chris

    May 12, 2008 | Olympus FL-36 TTL Flash

    3 Answers

    Vivitar 3200 Flashgun and Canon EOS 400D


    Using Vivitar 3200A flash gun on a DSLR is risky for the following reason. The trigger voltage of a DSLR at flash hot shoe that takes it to its TTL (through the lens) circuit is less than 10 volts, it is about 6 to 8 volts in the recent DSLRs. The trigger voltage generated by Vivitar 3200A at full charge flashing is around 180 volts (max). That is a fatal dose for a sensitive DSLR TTL circuit. This high voltage flash gun will work endlessly, the only damage is to the TTL flash circuit. When you attach a TTL flash to the DSLR after using Vivitar 3200A for sometime, your TTL flash will not communicate with your camera. It will be just another ordinary flash without any auto functions. There is a Wein adapter that you can fix b/w your cameral hot shoe and the vivitar flash gun that is said to reduce the trigger voltage that passes into the camera. Try it if you get it. Without this gadget it is better not to use non recommended and non TTL flashes on latest DSLRs.

    Apr 13, 2008 | Cameras

    1 Answer

    Ttl dedicated flash gun operating instructions


    What equipment are you talking about?

    Please give as much as possible.

    Alexander
    atdlee@netzero.com

    Dec 17, 2007 | Metz mecablitz 45 CL-4 TTL Flash

    1 Answer

    What is the difference between “Auto” and “TTL” in the flash setting?


    Standard TTL can be used with any type of Nikkor lens. In standard D-TTL flash, automatic flash output level compensation is not available. This means that even though the main subject is correctly exposed, the background may not be. Standard D-TTL flash is useful when you want to highlight the main subject or perform flash exposure compensation. D-3D Multi sensor balanced fill-flash together with D-multi sensor balanced fill flash is called Automatic Balanced Fill flash with TTL multi sensor. What this does is it performs a balanced metering that uses multi pattern photometering information to provide a balance between the main subject and the background light. The difference between the D-3D multi sensor and the D-multi sensor is that one is used with D or G type lenses (D-3D) and the other is used with non-D or G type lenses.

    Aug 29, 2005 | Fuji FinePix S3 Pro Digital Camera

    Not finding what you are looking for?
    Cameras Logo

    Related Topics:

    94 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Olympus Cameras Experts

    kakima

    Level 3 Expert

    102366 Answers

    Willem.
    Willem.

    Level 2 Expert

    359 Answers

    Steven Wander
    Steven Wander

    Level 3 Expert

    579 Answers

    Are you an Olympus Camera Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...