Question about Televison & Video
Posted by Anonymous on
If the tv is only working when it's being updated then there is either a problem with the update firmware or the tvs memory chip. the chip is on the main av board and its best not to touch it if you don't know what you are doing, replacing the board may only be your option.
Posted on Jun 06, 2017
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
These sets have capacitor problems in there power supplies. These capacitors will leak and cause voltages to fluctuate. Have a repair shop check it out.
Posted on Oct 14, 2009
Most likely a power supply problem. If it's covered under the warranty take it in right away and have them fix it. If not a good Philip's service shop can fix it. They may have a flat fee repair charge?
Posted on Nov 19, 2009
Don't have a "solution" yet, but found this table that decodes the blinks:
Error Code Table
0 = No error
1 = X-ray protection, E/W protection, and/or Vertical protection active
2 = High beam current protection active
3 = Reserved
4 = +5V protection active
5 = Signal Processor (IC 7150) register corrupted
6 = Signal Processor (IC 7150) error
7 = Total failure
8 = Internal RAM error (Microprocessor IC 7000)
10 = NV memory (IC7088) addressing error
11 = NV memory (IC7088) size error
12 = Histogram (YUV) (IC 7770) error
14 = Sound processor I²C error (TDA9855)
16 = Main Tuner I²C error (IC 1125)
17 = PIP Processor I²C error (IC 7350)
18 = PIP Tuner I²C error (IC 1127)
I, too, have the 6 blinks of a red light. I found another person online that suggested that perhaps the power cord was "defective" as it's a common issue. I replaced the power cord with one from an old computer (they're the same cord) and it seems to be OK now. That's all I can offer you at this time.
Posted on Jan 24, 2010
Testimonial: "Thank you for your help, I will give it a shot!"
Power supply board is dead.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.
Posted on Apr 21, 2010
Tips for a great answer:
Sep 23, 2014 | Televison & Video
Nov 16, 2013 | Philips 42PF9431D/37 TV
Nov 07, 2013 | Televison & Video
Aug 07, 2012 | Televison & Video
Apr 21, 2010 | Philips 42PF9431D/37 TV
Dec 11, 2009 | Philips Televison & Video
Nov 19, 2009 | Televison & Video
Nov 11, 2009 | Televison & Video
Jun 28, 2009 | Philips 42PF9631D 42 in. Plasma Television
Sep 05, 2007 | Philips 60PP9200D Television
Nov 19, 2017 | Yamaha Televison & Video
44 people viewed this question
Usually answered in minutes!