Question about Standard (CRT) Televisions
I assume you are speaking of the sensor (on the TV) which picks up the remote box commands, or the infrared LED (on the remote) which transmits the commands. Which ever the case, it sounds like a broken & intermittent solder connection where the device solders onto the circuit board. Most of problem I've seen is the remote box end of things.
You will need a solder iron, solder, and a little soldering expertise to fix this. The remote box might have one or two screws, otherwise the case is usually a snap together, and sometimes frustrating to get apart.
If the TV end of things, then you must unplug the set, take the back cover, and carefully remove the main chassis, and note where the sensor is.
Hope this helps!
Posted on Nov 13, 2007
Tips for a great answer:
Jan 06, 2010 | Symphonic ST4819 19" TV
Oct 21, 2009 | Symphonic ST420FF 20" TV
Sep 01, 2009 | Symphonic T19WF 19" TV
Dec 19, 2008 | Symphonic ST419E TV
Feb 23, 2008 | Symphonic WF20D4 TV
Jan 12, 2008 | Symphonic ST419E TV
Apr 25, 2007 | Symphonic ST420FF 20" TV
Apr 05, 2007 | Symphonic ST419E TV
Oct 20, 2016 | Samsung Standard (CRT) Televisions
536 people viewed this question
Usually answered in minutes!