Question about GE (PSS26MSRSS) Side by Side Refrigerator

2 Answers

GE Profile French Door Bottom Freezer not cooling

I have a 22 cu ft. GE Profile french door, bottom freezer that is about 1 1/2 yrs old (model no. PFS22SBSBSS). It does not stay cool and I can hear frequent start/stops "clicking". The freezer seems to stay around 0 degrees, but the fridge is warm. The display often shows 0, and 60 (fridge). Sometimes when I open the doors the display stays blank, but the fridge seems to be running and is cooling down.

I have tried unplugging it for 1 day and it seems to start back up and cools down, but not for long. Then it goes into the frequent clicking mode.

Any suggestions/things I can check?



Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: GE Profile French Door Bottom Freezer not cooling

I am experiencing the same problem with my GE fridge. We have already tried the Turbo Cool, but nothing seems to help.

Posted on Sep 21, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 248 Answers
Re: GE Profile French Door Bottom Freezer not cooling

When it's running is the fan in the freezer on? It may be a quite fan so feel for air from top back in freezer. If not it may need a new evaporator fan motor.
Also , is there frost on back wall of freezer? If so it's not defrosting.
Is there frost near the freezer door area? If so the door isn't always getting closed properly. This causes a frost and ice build up in the passageway to the refrigerator section from the freezer. The blocks the cold air from getting to freezer.

Posted on Nov 14, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Ge pfs22mi door gasket

This is going to be tricky so watch the video and tell me if the answer to you question comes out and resolved by the tricks revealed in the below video.. Sea Breeze
When you say latch can you tell me the part number of the latch you say that you need replaced? Here is a link to the parts you are describing HERE
GE Profile French door bottom freezer Model # PFS22MISBWW Door Gasket and related parts

Apr 01, 2013 | GE Profile Bottom-Freezer Refrigerator...

1 Answer

GE GFSL6KEXLS Stainless Steel (2585 cu ft) Bottom Freezer French Door Refrigerator Problem: Freezer handle is all stainless steel is loose. How can I tighten it? I looks like I would have to go through...

look for a small hole on one side of the handle. There should be a set screw there you can tighten. (the handle attaches to a ball shaped peg under the handle, and does not attach from the inside of the door)

Nov 28, 2010 | GE GFSL6KEXLS Stainless Steel (2585 cu ft)...

2 Answers

GE Profile french door refrig not cooling but freezer is cold

your damper vent door is not opening to let the freezers cold air in to the refrigerator compartment,its located between the refrige and freezer,also make sure the evaporator fans are running to move the cold air

May 16, 2010 | GE Profile 25.1 Cu. Ft. Side-by-Side...

1 Answer

GE Energy Star French Door Bottom Freezer handle popped off

You cant find a hole to insert screw from outside. It is true, and you can't fix it yourself to what it looked like earlier. The company first screws in through the handle and then covers the hole made by it with the material of the handle. If you have to fix it yourself, you can only pierce those screws through the handle leaving the mark behind. If you don't want that, contact your company or dealer.

Apr 22, 2010 | GE Profile 25.1 Cu. Ft. Side-by-Side...

1 Answer

Water build up on inside of fridge door of ge french door fridge

humid air in the house. any time you open the fridge, house air is sucked in. when you close it, the fridge cools the air and moisture from the warm air condenses on any cold surface. also check to see if there is a gap in the seal.

Aug 26, 2009 | GE Profile Bottom-Freezer Refrigerator...

1 Answer

GE French Door 22 cu ft (PFSW2MIXSS). Loud buzzing from behind the freezer. Ceased cooling.

The model number you post appears to be incorrect.
The buzzing was from the evaporator fan blade hitting on some ice build up. Getting to it on a bottom freezer refrig is a bit of a pain in the back side. If your model has a pull out freezer drawer, that has to be removed, the icemaker removed, one side of the drawer supports from the freezer wall, all to allow you to remove the back wall of the freezer to get to the fan. You may be able to just thaw out the fan and surrounding area then which will get your refrig cooling again, if the ice was just around the fan area. On the pain in the but repair scale of 1 - 10, this one rates at least a 7.

May 30, 2009 | GE PFS22SBSSS Stainless Steel French Door...

1 Answer

GE Profile 25.1 cu. ft. fridge is too large for door entrance

yes you can, or just removed the bottom drawer, open the upper doors and slide the refrigeraro thru the doorway by just swinging it thru. a mover friend of mine showed me that trick at it work great.

Jan 24, 2009 | Pds GE Profile Bottom-Freezer Drawer...

Not finding what you are looking for?
GE (PSS26MSRSS) Side by Side Refrigerator Logo

1,673 people viewed this question

Ask a Question

Usually answered in minutes!

Top Refrigerators Experts

Vish Iyer
Vish Iyer

Level 2 Expert

74 Answers

Todd Marr
Todd Marr

Level 2 Expert

77 Answers

John Tripp
John Tripp

Level 3 Expert

4625 Answers

Are you a Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides