I found the problem on my printer (iP1200)! When I inspected the cartridge contacts, I found that the contacts in the middle row pressed on the left of the contacts of the cartridge. So I filed the guide on the right of the cartridge so it can move about a half mm to the left. And Wonderlik it worked fine.
Good luck, I hope this helps.
this website really helps a lot. just read instructions & find a specific name for what you are looking for & it really works. tnx to you guys especially to aghogho. More power. God Speed
Hi I have a canon IP4000 that is about 4 years old and gets a lot of use. Just recently, I seem to...
(More)
Hi I have a canon IP4000 that is about 4 years old and gets a lot of use. Just recently, I seem to be getting many problems with the black ink tank, which when it is down to about 50% full starts missing horizontal lines down the page. i have tried deep cleaning several times but this only clears the problem for 2-3 pages of print. If you remove the cartridge and shake, vigorously until some ink flies all over the room it then starts to work again but he problem comes back when the ink tank is 25% full and I end up having to replace the ink tank again. I only use canon 3e inks, is there a problem with these inks or does my print head need replacing?
My canon pixma ip4000 has stopped printing. It is going through the motions but the paper is coming...
(More)
My canon pixma ip4000 has stopped printing. It is going through the motions but the paper is coming out blank with nothing on it.
I put in a new cartridge and it said the ink was not alligned properly and I need to refer to my...
(More)
I put in a new cartridge and it said the ink was not alligned properly and I need to refer to my service manual. Can someone please help
My problem is when i intend to print on my printer canon PIXMA iP 1200 it's always tells on my monitor removed the jammed paper but i notice that no jammed paper was occurred on my printer.Kindly help on my problem.