Question about Dell Inspiron 600m Smart Card/PCMCIA Card Housing, includes eject button, (card not included) - 8P48... (8P484) CD-ROM Drive

4 Answers

Dvd/cd driver my dvd/cd driver has stopped working  gone into properties and that tells my its disabled code 22  how can i enable it again as window is unable to help

Posted by on

  • 4 more comments 
  • geforz Nov 21, 2007

    my dvd/cd driver has stopped working gone into properties and that tells my its disabled code 37 how can i enable it again as window is unable to help

  • koon_al Nov 25, 2007

    How do enable my cd/dvd rom on my daughter's emachines?

  • arash arashi Dec 09, 2007


    i have chenged my windows and my dvd/cdrw driver is gone how can i download it. thanks.

  • Anonymous Dec 25, 2007

    need driver for Acer cd 950p

  • Weezi84 Dec 28, 2007

    I had my ipod connected when my itunes was upgrading, all of a sudden my computer could not load my cd rom driver. Now my cdrom drive is no where to be found

  • chintan_triv Feb 14, 2009

    Error code22 come up while dvd drive is not working it can not enable it is is a driver problem?????



4 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 20 answers of more than 400 characters.


    An expert who has answered 20 questions.

  • Expert
  • 66 Answers

You can solve this problem by going to start, then run, type regedit. open hkey_local_machine, then system, then control, then class, then 4D36E965-E325-11CE-BFC1-08002BE10318, once in this go over to the right hand side and delete upper filters and then lower filters. restart your computer and your dvd/cd-rom drive will work properly, if you look in device manager there will no longer be a question mark and it will tell you all is working correctly.

Posted on Jan 29, 2008


My cd-rom is not regognized by my OS. cd rom driver is not workin nor it is displayed in the drives list

Posted on Dec 19, 2007

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Expert
  • 239 Answers

You may have to go into your device manager and turn it on there under diskdrives and inable the drive there, And for marash you can install the drivers in the add new hardware in the control panel. just click that and install from a specific location and look in the options u should see a cdrom or dvd drive select one of those what ever one you have. I would think that would get you up and running if not write back here with the model name and any other information you can give, thanks and Have a Happy Holidays

Posted on Dec 15, 2007

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Expert
  • 85 Answers

Reinstall the drivers

Posted on Nov 13, 2007

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have had an LG dvd burner(GH22NP20) for quite a while now, recently it has been unable to read any cd-roms. It reads dvd-roms though..... It will load cd-roms outside of windows so I know the drive is...

click start control panel,administrive tools,computer management,device manager scroll to cd/dvd rom drives right click properties then properties again then tick enable cd digital cd audio for this cd rom device or scroll to dvd regions select the no _ for your specific area
hope this helps

Jan 26, 2011 | LG 22x8x22x DVD?±RW DL IDE Drive Black...

2 Answers

My computer no longer "sees"

at end of this instruction set, see link to review more questions/answers,as your issue with CD/DVD ROM will vary .

This document applies to HP and Compaq desktop computers with Windows XP, Me, and 98. Use this document to make Windows and the CD writing software recognize the CD or DVD writer drive. Start at Step 1; do not skip to other sections until Step 1 has been completed. Step 1: Does Windows detect the CD or DVD drive? Use Device Manager to determine if Windows is recognizing the drive:
  1. In Windows XP, click Start , and right-click My Computer . In Windows 98 and Me, right-click the My Computer icon on the desktop.
  2. In Windows XP, select Properties , click the Hardware tab, and then click the Device Manager button. In Windows 98 and Me, select Properties , and click the Device Manager tab.
  3. Click the plus sign (+ ) next to DVD/CD-ROM Drives (or similar) category.
  4. Do the following depending on what is listed in the DVD/CD-ROM drives category:
    • If the CD or DVD drive name is missing , the drive is not being detected by Windows. Close Device Manager and skip to the section CD or DVD drive is not recognized by Windows .
    • If a drive name is shown but is disabled (icon is marked with a red X, c00877300.gif ), the drive has been disabled. Right-click the drive name and select Enable . You may have to restart the computer to complete the enabling process. The drive should work correctly once it has been enabled. NOTE: If the drive cannot be enabled, a required service or driver that the drive needs is not functioning or has been disabled. Click the plus sign next to IDE ATA/ATAPI controllers and troubleshoot any problems found according to any error codes in Device Manager. Resetting the BIOS may also resolve this problem.
    • If a drive name is shown but contains an alert icon (an icon marked with an alert symbol, c00877301.gif ), then use the section Using Device Manager error codes to troubleshoot the problem. You may also use the next section Disc burning software does not recognize the original drive to reset the drive configuration.
    • If the CD or DVD drive is listed as normal but your disc burning software does not recognize the drive, Device Manager shows no special icons c00877302.gif . Windows is detecting the drive but the writing software does not. Leave Device Manager open and continue with the next section Disc burning software does not recognize the original drive .

here is a link that will give you several other questions and answers to CD/DVD ROM issues.

please rate me with 4 thumbs UP to keep my services active

Dec 01, 2010 | HP Pavilion a810n (PP164AA) PC Desktop

1 Answer

I have SandDisk S3 UCL Mode USB Device which is not detecting right now. One week back its working fine. In computer management i found device has in diabled mode. when i try to make it enable its again...

How to Fix a Code 22 Error

  1. Enable the device. Since the most common reason you'll see a Code 22 error in Device Manager is because the device has been manually disabled, try manually enabling it.

    Most of the time this will fix a Code 22 issue. Don't worry if it doesn't, however. All that means is that the Code 22 you're seeing was caused by something a bit less common.
  1. Restart your computer if you haven't already.

    There's always the chance that the error Code 22 you're seeing on a device was caused by a temporary problem with the hardware. If so, a restart of your computer might be all you need to fix the Code 22 error.
  2. Did you install a device or make a change in Device Manager just before the Code 22 error appeared? If so, it's highly likely that the change you made caused the Code 22 error.

    Undo the change if you can, restart your PC, and then check again for the Code 22 error.

    Depending on the changes you made, some solutions might include:
  1. Reinstall the drivers for the device. Uninstalling and then reinstalling the drivers for the device is one possible solution to a Code 22 error.

    Important: If a USB device is generating the Code 22 error, uninstall every device under the Universal Serial Bus controllers hardware category in Device Manager as part of the driver reinstall. This includes any USB Mass Storage Device, USB Host Controller, and USB Root Hub.

    Note: Correctly reinstalling a driver, as in the instructions linked above, is not the same as simply updating a driver. A full driver reinstall involves completely removing the currently installed driver and then letting Windows install it over again from scratch.
  2. Update the drivers for the device. It's also possible that installing the latest drivers for the device could correct the Code 22 error.

    If updating the drivers does remove the Code 22 error, it means that the stored Windows drivers you reinstalled in the previous step were either damaged or were the wrong drivers.
  3. Clear CMOS. If Windows had to disable the device, generating the Code 22 error due to a lack of system resources, clearing CMOS might fix the problem.
  4. Update BIOS. Another possibility is that a newer BIOS version could better pass system resource handling to Windows, correcting the Code 22 error.
  1. Move the device to a different expansion slot on the motherboard, assuming of course that the piece of hardware with the Code 22 error is an expansion card of some kind.

    If the Code 22 error is due to a lack of system resources available for the card, moving it to a different slot on the motherboard could clear up the problem. This isn't as common a situation with newer hardware and Windows versions but it is possible and is an easy troubleshooting step to try.
  2. Replace the hardware. A problem with the device itself might be the root cause of the Code 22 error, in which case replacing the hardware is the next logical step.

    While not likely, another possibility is that the device is incompatible with your version of Windows. You can always check the Windows HCL to be sure.

    Note: If you're positive that the hardware is working properly and is properly configured then you might consider a repair install of Windows. If that doesn't work, try a clean install of Windows. I don't recommend doing either before you replace the hardware, but you may have to give them a try if you're out of other options.
Please let me know if you've fixed a Code 22 error in a way I haven't mentioned above. I'd like to keep this page as accurate as possible.

What Does the Code 22 Error Apply to?

The Code 22 error could apply to any hardware device managed by Device Manager.
Any of Microsoft's operating systems could experience a Code 22 Device Manager error including Windows 10, Windows 8, Windows 7, Windows Vista, Windows XP, and more.

Still Having Code 22 Issues in Device Manager?

See Get More Help for information about contacting me on social networks or via email, posting on tech support forums, and more.
Be sure to let me know that the exact error you're receiving is the Code 22 error in Device Manager. Also, please let us know what steps you've already taken to try to fix the problem.
Show Full Article

Aug 03, 2017 | Computers & Internet

1 Answer

I have a hewlett-Packard m9047c computer. When I put a disk in my dvd player. (DVD Writer Model TS-H653) The light comes on it sounds like its working but the computer doesnt do anything with it. It...

  1. Open Windows Explorer by pressing the Windows + "e" key.

  2. Right-click the desired CD-ROM and select Properties from the menu.

  3. Select the AutoPlay tab.

  4. Select each item from the pulldown list and for the Action to perform, select "Take no action" to disable autorun, or pick the apporpriate action to take if enabling autorun.

  5. Select OK.

Aug 30, 2010 | HP Computers & Internet

3 Answers

My DVD rom drive is not working I cannot "see" it on the system I have this error message "windowns cannot load the device driver for this hardware. the driver can be corrupted or m missing error code 29...

Check in device manager. To do this. 1st right click my computer, 2nd Click properties, 3rd click hardware, 4th click Device manager, 5th check that the computer is seeing the DVD/CD-ROM drives by double clicking the DVD/CD-ROM drives words or click the + symbol next to DVD/CD-ROM drives, the drop down menu will list your device if it’s there. If a device is listed double click the device. If it says it’s working properly click driver in the top bar and uninstall, then re-boot, the system will re-load the driver on re-booting. If the driver was corrupt it will re-install it correctly.
If the system cannot find the driver on re-booting it's missing from the systems file, go to the Support Fujitsu site and download and install the driver. Its free all you have to do is put the laptop details in the appropriate boxes and all the drivers for that laptop will be listed.
From your description of the error message it’s no doubt a corrupt or missing driver.
Hope this helps.

Feb 24, 2010 | Compaq Presario V4000 Notebook

1 Answer

The disc medio tray will not open and will not run on hp g60

Hi I'm Rain ,
Ok follow these instructions to reboot your CD Rom drive.

  1. click start then My Computer .
  2. In My Computer right click the DVD/CD rom drive icon .
  3. In the list , Click eject to see if the drive is being reconized .
  4. If nothing happens repeat steps 1-2
Now when you get to sep 3 you will click properties .

5. In properties click Hardware .

6. In Hardware click the DVD/CD device to highlight it .

7. Click properties .

Now look to the bottom of that window to see device status .
If it says , this device is working properly .Properties .
Next click Driver . In driver you will see a list of option tabs that allows you to , Roll Back driver Update driver and Disable driver .
The other option is Driver Details.

Click Roll Back driver to restore the driver back to the state before you added the latest program . Click ok and follow the screen instructions.
If this fails , you can follow these steps to get back to Driver and chose
Disable Driver . Click ok if another window pops up.
Now what you are doing is rebooting the DVD/CD rom drive.
This will restart all the drivers that are associated with the DVD/CD rom
device .
Now follow all the steps again to get back to Driver .
Now in Driver you will need to click Enable to restart the DVD/CD rom
device . Reboot your system and try the DVD/ CD tray to see if it responds . If it still fails to respond you most likely will need to replace or service the DVD/CD Rom Hardware { the Tray } .

Jan 08, 2010 | HP G60-230US Notebook

1 Answer

Conexant audio driver is disabled

Try to download the driver again from the Internet.

Save the file into C: drive (note the location).

Try one of these methods to install it.

1. Find the file you download and double click it.

If this doesn't work...

1. Try enabling the audio card in Device Manager...

To do this, right click "My Computer" and click on "Manage". Then Click on "Device Manager" on the window that opens.

Look for your audio device. Right click it, then click "enable".

3. From the same place you can update the driver....

Right click the audio device, select Properties

Then click on Update Drivers.... now browse to the place you saved the driver file.

Hopefully one of these things will work.

Jan 06, 2009 | Compaq Presario 700 470024-192 Notebook

2 Answers

DVD/CD ROM not working...

delete the upper and lower filter fo cd dvd drive from registry editor
and restart the system

Sep 19, 2008 | Gateway GT5654 Desktop PC

1 Answer

Drive doesn't play CD-ROM but plays DVD games...

1. go to device manager / right click on cd drive / uninstall driver / reboot and windows will reinstall driver 2. go to My computer right click on cd drive properties - check digital cd playback recording - check enable cd recording on this drive driver - update or uninstall reboot your computer

Dec 26, 2006 | Lite On LITE-ON SOHC-5236V COMBO BK OEM...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18417 Answers

Alun Cox

Level 3 Expert

2678 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides