Question about Ovens
Hi there hope you can help our gas cooker oven has gas supply but when the oven its turned up fully the flame does not go up to a full supply
the rings on top work fine and turn up full
the grill works full
It sounds exactly the same as I am experiencing on my oven of the same model. My theory is that the full flame gas is controlled by a thermostat, and that this has broken hence why the oven only stays on preheat. This will be a matter of a replacement part. Most likely the thermostat is a bi-metal strip that, because it has heated and cooled so many times in it's life it has simply finally given up. Try searching online for the correct part and get a corgi registered fitter or another suitably qualified fitter to come and replace it.
Posted on Apr 07, 2008
I would recommend Sussex Cooker Repairs wholeheartedly. I 'phoned them on 01273 420134, had the part sent by mail and with their telephone help installed it in just over half an hour. Total cost £60.33.
7th January 2011
Posted on Jan 07, 2011
Having it replaced by Rangemaster it's the FFD part going to cost £140 inclusive of labour , parts and VAT so a lot cheaper than a new cooker. I've had my rangemaster for over 10 years with no problems so don't want to part with it. Ring the firm they were so helpful.
Posted on Feb 24, 2010
Hi, i have the same problem, has anyone had this issued repaired? hiw much was the replacement part?
Posted on Jan 23, 2010
Tips for a great answer:
Feb 24, 2013 | Ovens
Sep 24, 2011 | Ovens
Jun 11, 2011 | Ovens
Apr 02, 2011 | Ovens
Your problem could be or probably is with the regulator...not enough gas pressure...
Propane, LP, or Natural Gas Regulator Problems
Dec 13, 2010 | Ovens
Aug 18, 2010 | Ovens
Jun 22, 2010 | Ovens
Oct 21, 2009 | Ovens
4,211 people viewed this question
Usually answered in minutes!