How to switch computers

Product support is at: http://www.p4c.philips.com/cgi-bin/dcbint/cpindex.pl?slg=en&scy=us&ctn=227E3QPHSU/00

Try: monitor's power ON and OFF. Access the OSD menu. Return to previous OSD level. Change display format. Adjust the OSD menu. Change the signal input source. SmartImage Lite. There are three modes to be selected: Standard, Internet and Game. Model 227E3QPH: 5 62 4 3 7 - See the user manual.

Internet: manual configuration
Nokia C5

*Menu


·Settings.

·Choose Connectivity.




·Choose Destinations.

·Choose Internet.

·Choose Options,and then New access point.

·Choose No







·Choose Packet data.

·Enter Proximus Internet, and choose OK.

·If Proximus Internet has Priority 1, skip the next step.
·If not, go to the next step.
Previous



·Choose Proximus Internet for a second, until a popup window is displayed.






·Choose Change priority, and choose the highest position.
Previous

·Choose Proximus Internet.

·Choose Connection name, enter Proximus Internet, and choose OK.
·Choose Access point name, enterinternet.proximus.be, and choose OK.
·Choose User name, enter nothing, and choose OK.
·Under Prompt password, choose No.
Previous
Next

·Choose Password, enter nothing, and choose OK.
·Under Authentication, choose Normal.
·Choose Homepage, enter http://m.skynet.be, and choose OK.
·Under Use access point, choose Automatically.
·
·
·Return to the Main menu.
Previous

·Choose Web.

·Choose Options, and then Settings.

·Choose General.


·Choose Access point.


·Choose Internet, Options, and then Select access

·Choose Proximus Internet.

·Choose Homepage, and then User defined.
Previous
Next
Step 22 of 24

·Enter http://m.skynet.be, and choose OK.
·Return to the Start screen.
Previous

·Start screen.
·Switch off the C5-03 and restart it in order to activate the settings.
·You can now start using the internet.
Previous

• After switching on your computer, let the DELL logo appear before pressing the F2 key until Entering Setup is displayed on the screen.
• Previous versions of DELL might require you to press CTRL+ALT+ENTER to access the BIOS set up menu.
• The DELL laptops use the Fn+ESC or Fn+F1 keys to access the BIOS set up.

• After switching on your computer, let the DELL logo appear before pressing the F2 key until Entering Setup is displayed on the screen.
• Previous versions of DELL might require you to press CTRL+ALT+ENTER to access the BIOS set up menu.
• The DELL laptops use the Fn+ESC or Fn+F1 keys to access the BIOS set up.

Step 1:
All computer systems go through a set of instructions called the Basic Input/Output System (BIOS) when they are turned on. The BIOS checks all of the hardware and software installed on the computer to make sure they are working properly before loading the operating system. You may need to access the BIOS menu periodically to find out the current version of the BIOS you have if there are upgrades available. The command you use to access the BIOS settings on an Emachines computer will vary depending on the specific model you have.

Access the Start menu and click "Shut Down." Select the "Restart" option. Wait for the Emachines logo to appear on the screen as the computer begins booting up again. Press the "Tab" key when the logo appears and see if the computer switches to the BIOS menu. Press the "Escape," "Delete," or "F2" keys if the "Tab" key doesn't take you to the BIOS menu screen. Use the right arrow key to highlight the "Main" entry and press Enter. Scroll down to the heading labeled "BIOS version." Check the long string of numbers and letters under the "BIOS version" heading to locate the current BIOS version your Emachines is using. Press the "F10" key to exit the BIOS menu screen and finish booting up the computer's operating system.
Access/Enter Motherboard BIOS http://michaelstevenstech.com/bios_manufacturer.htm

Hi

you could try this if it helps


There are two ways to access Roxio BackOn Track to recovery the computer, either through the boot menu, or through the Windows Start menu.

You can use the boot menu to restore your computer to a previous working state or to return the computer to the state it was in before the last time it was restored.
1. Press the power button to turn on the HP Mini.
2. Press and hold down the f6 key to open the Windows Boot Manager, use the down arrow key to select Roxio BackOnTrack , and then press the enter key to open Roxio BackOn Track.
If you can access Windows, in addition to restoring your computer to a previous working state, you use other options, such as Disaster Recovery.
1. Click Start , All Programs , Roxio , BackOnTrack , and then BackOnTrack Home to open Roxio BackOn Track

Hope this helps you

Base from the description of your problem it seems that your memory got corrupted but just to make sure we may need to connect the camera to your computer and check it from there or connect the memory card to a card reader and access it and see if how many photo are there.

If the old photo are there better save those to your computer and then format your memory card from the camera menu.

It could be that your router is encrypting the information. This is easily fixed by changing a setting. To access this setting, click on the wi-fi icon in the system tray, right-click on your network, click properties, click the security tab, and specify the appropriate security and encryption type. Both of these can be found in the setup menu of your router. You can find out how to locate these settings by referencing your instruction manual that came with the router. Another way to fix this which is a much easier method is to go into the properties menu as specified before on the computer that can access your router, and click the "Copy this network profile to a USB flash drive". After that, plug the flash drive into your other computer and select the network setup wizard. After that a setup assistant will open and configure your settings exactly how they were on your other computer. Try this method first, and if that does not work, try the previous method I listed. Good luck!

The easiest way is to use the startup disc that came with the computer. Start from it and choose the language. The next screen should have a menu bar. Under (tools or utilitys) you will find a little program called password reset. Change the password, reboot the computer log in as the user with the password you created and make a new account for yourself with administrator privileges. Log into your new account and delete the previous user.