I would need instruction manual for my Memorex

The AT&T EL51209 does not have an answering system. It will check your voice mail if you have that service from your telephone company. You need to check the voice mail FAQ from the provider to set an outgoing message. Otherwise, you'll need a separate answering machine that is connected to the phone jack and then connects to the EL51209.

AT&T has the manual for this cordless phone system here: https://att.vtp-media.com/ecp/documents/product_Product/124/UserManual/5631/el51209_manual_USA_i4.pdf .

I wish that I had better news for you.

Cindy Wells

you need to go in to system admin of the phone system, the redo the 440 feature. for proper instructions on this, you might need the admin manual. you may post back for further help if this doesn't get you set. thanks

You may download a copy of the manual here. The day/time instructions are on pages 9-10. The outgoing message instructions are on page 21.

Follow the instructions beginning on page 55 of this manual.

voice mail procedure manual can be downloaded at www.natgtelecom.com/elitemailug.pdf

here is a pdf of the manual:

http://www.memorex.com/support/support_product_detail.php?pid=50434

Well, your machine might be broken, or you haven't set the little switch on the unit to ANS. The switch is on the side of the machine where the cables come out. But here are the instructions from the manual:

Recording Outgoing Messages:

Your answering machine has a built-in outgoing message, "Hello, please leave a message after the tone." You can use this message or record your own.

1. Hold the ANNC/DAY/<<, and speak clearly into the microphone, no more than 10 inches away.

2. Release the ANNC/DAY/<< when you finish. Your answering machine beeps and automatically plays back your recorded message.

*Your outgoing message must be between one and 60 seconds.

*If you record your won message but wish to revert to the pre-recorded message, press DELETE during playback of your outgoing message.

We have the manual. We just found it... Long story! Where can i post it and should I just re-write it online someplace where peeps can find it?

Hi Diana - To record your outgoing message, hold down your ogm button ( outgoing message) for two seconds and it will ask you to record a message. To play back your message, just push the same button and it will play your message. If you don't like it just do it again. If this solves your problem PLEASE rate this as fixed. If you need more help just add a comment and I'll be happy to assist you further. Thanks and have a good day.

Jeff