Question about Printers & Copiers

1 Answer

Problems with user codes

I have a Savin C2820 and was trying to update our user code list. The local tech for our printer gave me wrong directions. Now I cant use any codes in order to make copies for clients. I deleted each individual user code as told to and now cant utilize these numbers or any for that matter really. This system is sa-post to have up to 500 user codes but it wont let me use them. Is there a way to reset this and start from scratch?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 179 Answers
Re: problems with user codes

Press the [user tools\counter] key then while holding pressed the "#" key press on the touch screen [system settings] and the machine will bring back the settings to default. You can reapeat the procedure for al other settings. If you need more instructions i will send you the operating instructions by e-mail if you want.
My e-mail address is ""

Posted on Jul 15, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have a savin 9060 and it is telling me I have an error 92 can u help me??

What do error codes 91 and 92 in the error log mean?
91: The job was reset by the device.
92: The job was manually reset by a user.

Dec 18, 2014 | Savin 9060 Copier With Feed, Finisher,...

2 Answers

User codes.

that's due to having too many'll need to delete some folks to make this work...maxing out the user codes will freeze the unit..

Apr 25, 2008 | Savin 9935DP Laser Printer

1 Answer

I have an error on my gestetner mp c2030 with code sc222, please help me.

Problem with the yellow laser unit. Probably need a tech for that one.

May 20, 2014 | Ricoh Compatible 4 Color Set Aficio MP...

1 Answer

My SAVIN 2820 SCAN FUNCTION does not connect to my home network.

If you have updated your OS to Vista, Win 7 or Win 8, update the firmware

Oct 15, 2012 | Savin Printers & Copiers

1 Answer

Error code sc571

You need to fill the oil tank with "silicon oil" i'm I'm not sure where your're from, but where I am its virtually impossible to get it apart from a dealer or a company such as Katun.
Once you have replenished the oil the error code will have to be reset, I would only let an experienced tech do it as you have to enter the service mode on the machine, and pressing the wrong buttons can cause untold problems.

Sep 20, 2012 | Savin C2410 Cyan Toner Cartridge...

1 Answer

Waste toner is almost full on Savin C9020

The bottom left portion of the display gave the error message:
Waste Toner Bottle 1 Almost Full. Please call service.

They were still able to print, however this message would not go away.

To Fix:

Power down the printer using the normal shutdown method.

Open the top front door.

Remove the cover directly below the 4 toner cartridges.


The removable cover below the toner cartridges is actually the Waste Toner Bottle.

Bring this to the dumpster.

There is a round, clear-plastic tab on the underside of the "bottle". Remove this.


Shake the bottle around over the dumpster. Continue until all the toner has been removed.

Push the clear plastic tab back in place. Wipe off all toner residue before putting it back into the printer.

Put the waste toner bottle back into place. Power on the Savin. Confirm the message no longer appears and that users are able to print.

Feb 08, 2012 | Savin Printers & Copiers

1 Answer

"Updating the destination list has failed" Error message on Savin

It is a communication problem that's all.
I may or may not be able to help.
Are you using a scanning software on your server to scan to folders? for example "Scanrouter V2"? -you can check on your server in "start" , "programs", you will see it there if it's installed.
If so do this:
open "Scanrouter V2 admin utility"(you should just have to click 'OK' when asked for password -it's usually not set) then and under the "server" button select "set I/O device", then select "remove". If you are asked to "retain settings" select "no". Then add it again> click "add", then "Browse", it should find the machine (either host name or IP address), select "ok" then name it whatever you want - it's for identification only. Destinations should re-appear if you Update.

If you scan via SMB, Email or otherwise, you'll have to get your IT dept, or whoever configured in the firstplace to figure it out.

*please rate response :)

Mar 24, 2009 | Ricoh Printers & Copiers

2 Answers

Savin 2522 sc542 error code

It's a fusing warm up error. The temperature isn't reaching the right rate within 20 seconds.

There isn't a reset procedure due to safety reasons. If you replace the thermistor, it should go away.

Mar 16, 2009 | Printers & Copiers

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts


Level 3 Expert

93861 Answers

old marine
old marine

Level 3 Expert

1298 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides