Where can I get a new case.Amazon doesn't seem to sell them any more.The last one I got from Amazon back in 2013 fell apart pretty quick.Where can I get a new one?

Direct from Rival, plus some on Amazon.

Rival Deep Fryer Replacement Parts ' Deepfryeri

https://rival.deepfryeri.com > Rival

We pared 8 distinguished rival deep fryer replacement parts features over the last 3 years. Check out which ... Filter by model, type, country region of manufacture and color. ... Rival Electric Deep Fryer czf625 Replacement Air Filter Cove. (4) ...

Parts for rival fryer czf625 - Fixya

https://www.fixya.com > ... > Kitchen Appliances - Others

Feb. 4, 2014 - I have a Rival CF-250 cool touch deep fryer. Where do I get the magnetic breakaway power cord, filters, and filter cover. Please let me know. Rival CZF625 Deep Fryer Troubleshooting Help & Support ...
Sep. 27, 2009
Owners manual for Rival CZF625 deep fryer - Fixya
Jan. 13, 2013
SOLVED: Need to find a replacement basket - Fixya
May 26, 2007
SOLVED: Need a power cord CZF625 - Fixya
Aug. 31, 2009
More results from www.fixya.com

Rival - Replacement Parts / Deep Fryer Parts ... - Amazon.com

https://www.amazon.com > Replacement-Parts-Rival-De...

Online shopping from a great selection at Home & Kitchen Store.

It will probably be better to just purchase a new replacement bobbin case. Bobbin cases do wear out and since yours fell apart, it may be suffering from use and age. There is also the hassle of trying to get the bobbin tension correct. New bobbin cases generally do not cost that much and you will know that it is factory set and ready to go in your machine.

if it broke apart when it hit the floor then you will have more problems than just putting the blades back on. those are fairly well put together so coming apart means they hit pretty hard. you wont ever get them to cut right even if they go back together. your gunna have to just buy new ones.

There are two phillip head screws holding the blender end together where it came apart. They are hidden under plugs on either side of the imprinted information. Simply drill a hole in each plug and remove them by putting something in the hole (small screwdriver) and pulling them out. Loosen the screws, enough to pull the body apart far enough to insert the blender end back in. Tighten the screws back up and your good to go. I left the plugs out, they don,t serve any purpose.

If you don't have a local bike shop to reassemble your seat or sell you a new one, you can probably find one to fit at Walmart or Target. A good bike shop will often give you one of better quality than you can buy at a department store, because many cyclists replace the seat with one that fits their bottom when they buy a new bike.

Did you happen to get resolution on this? My gas cap on my 04 1100 classic just fell apart this weekend. It looks like there might be some screws that rattled out and now I'm concerned that I have parts loose in the tank. I didn't spend the $$$ on a new cap yet as I was looking for options. Just doesn't seem right for a cap to just fall apart.

Replacement batteries are available on Amazon. Turn the A829 over and remove the one recessed screw at the top centre of the back case. You will then be able to slide this part off. Careful not to lose the shield that may fall off underneath this cover.
You will now find two screws underneath holding the rest of the back cover on and also two at bottom. A set of philips watchmaker's screwdrivers plus tweezers will be helpful. Put screws in safe place.
Fully remove the back and you will find the battery which has a small connector on the lead held in place by a strip of adhesive tape. Remove connector and battery and replace with the new battery. Put tape back on the connector and then replace back of MP3 player in the reverse order that you took it off. The shield that fell off on mine fits in top centre of device - mine fell off and I had to work out where it came from!
Hopefully these directions will help you

On these newer pumps, the plastic piston comes apart, and to fix it a new part is in order. Without looking at it, I think that is what might have happened. Bicycle pumps are almost throw-away items these days. In the old days you could buy all sorts of pump parts, but not anymore. Good luck

you can put the back back on, remove the 2 screws under the lint filter( if ones mounted to top of machine ), then the top tips back revealing 2 5/16 screws holding the front panel on. lift off hte panel and string new belt arond drum and hook ove rht e motro pulley , first passing the belt through the idler tension pulley. belt number is a 341241