Hiii can anyone help me with wiring of Isuzu engine 4jj1

https://idoc.pub/download/isuzu-d-max-2011-4jj1-engine-service-manualpdf-6ngedxymv6lv

(the PCV valve is placed at the cylinder head cover)

main head bolts - 1st step-70NM, 2nd step-70NM, 3rd step-60-75 degrees turn angle, 4th step-60-75 degrees
make sure you use new bolts. The smaller head bolts 25NM. Mains 166Nm, big ends 1st step-30Nm, 2nd step-45-60 degrees turn angle

The engine ECU for a 4JJ1 engine is on inside of RHF guard

post 2, why post so many times to USA forum
with no such car.
why not post to a forum in your unstated country.
is telling country so hard,? why?/??????????
learn that cars vary by COUNTRY

we have only these. 4. that year.
Ascender LSAscender Si-290 Si-370 LS

diesel 4J, and we dont have them in here (USA)
no year stated (the books come in years first) even used today.
in direct injected diesels and turbo.
no car stated. must we guess that?
there are four 4jh1 classes
The 4JH1-T is a 3.0L OHV direct injection engine, turbo intercooled

The 4JJ1-TC is a DOHC 16V 3.0L common rail direct injection engine with turbo and intercooler

The 4JJ1-TCX is a DOHC 16V 3.0L common rail direct injection engine with VGS-turbo and intercooler.

the no dash , this one?
The 4JX1 is a 3.0L direct injection diesel engine, turbo, some intercooled,

if you search on fixya
you find this
http://www.clubisuzu.com/viewforum.php?f=23

ask them,

the old 4Ja and JB are, 0.4mm. cold.
4JJ1 is .15mm

here is a link to the -TC version
http://www.4wdaction.com.au/forum/viewtopic.php?f=104&t=123562

shows. .4mm
all rumor (cuz we dont have them here, so no books)
building engines on rumor, is over the top for me.
i buy the FSM and use that. FACTS win, rumor 0.

Check your fuel pressure. Running the pump dry could of damaged it.

a USA CAR,"??????
be like 50 pages in the book, we can post that
buy a book.?
log in to mitchells, diy (google it) and read. like us.

the wiki shows. (there are not just one jj1,)
The 4JJ1-TC is a DOHC 16 V 3.0 L common rail direct injection engine with turbo and intercooler which replaced the 4JH1 in the Holden Rodeo and later Chevrolet & Holden Colorado produced in Thailand. Stock power was 146 hp (107 kW) and 294 N·m with a 17.5:1 compression ratio. Bore x stroke is 95.4 mm x 104.9 mm.


you really have
USA rodeo?
with this DIESEL?

you posted to the:

1995 Isuzu Rodeo

we in the USA

I need to set the timing back on my 2011 dmax 3.0 TD 4jj1 engine type

Takes the lash out the gear train so its quieter, there a spring tng inside there.