Question about Intel PENTIUM-4 865GV CHIP MOTHER BOARD (MBP4I65GV) Motherboard

6 Answers

Display problem in pentium mother board!

MODEL NO.--INTEL 845 GVRS. problem is --- i heard 3 beep sounds from speaker with out DDR RAM installed and with RAM installed there is no display and no beep sound. CORE VOLTAGE 1.4, RAM -2.5, CLOCK -3.3, AND OTHER VOLTAGES ON BOARD ARE QUITE OK.. Pls. tell me how can i slove my problem.

Posted by on

  • 2 more comments 
  • mnjpnd Nov 14, 2007

    i did the same. but no display at all. the problem is remain same.

    pls. give some other tips so i can slove my display problem.

  • msrsoftwares Mar 03, 2008

    MODEL NO.--INTEL 845 GVRS. problem is --- power led is on but no display , no beep sound & no booting Bios, ( SMBS, RAM ,, PROCESSER, & HD Are all ok). Pls. tell me how can i slove my problem?

  • samy6522 Jun 06, 2008

    yes

  • Anonymous Jan 11, 2009

    my ram is ok no falt in mother board volatge is ok you why display is not come



×

Ad

6 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

MODEL NO.--INTEL 845 GVRS. problem is --- power led is on but no display and no beep sound. SMBS, RAM ,, PROCESSER, & HD Are all ok. Pls. tell me how can i slove my problem?

Posted on Mar 01, 2008

  • msrsoftwares Mar 01, 2008

    MODEL NO.--INTEL 845 GVRS. problem is --- power led is on but no display , no beep sound & no booting Bios, ( SMBS, RAM ,, PROCESSER, & HD Are all ok). Pls. tell me how can i slove my problem?

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

No display in my motherboard P-945 and all component is ok

Posted on Sep 05, 2008

Ad

My mother board has taken the problen lite on but no display

Posted on Jun 03, 2008

MODEL NO.--INTEL 845 GVRS. problem is --- power led is on but no display , no beep sound & no booting Bios, ( SMBS, RAM ,, PROCESSER, & HD Are all ok). Pls. tell me how can i slove my problem?

Posted on Apr 03, 2008

My problem is dispaly plz solf

Posted on Mar 05, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 490 Answers

Please disconnect all the device attached like HDD,FDD,CDROM/DVD , means attach only MB to supply and try to switch it on , it will help you solving the problem , once the display gets back then point by point you can attch the devices back

Posted on Nov 13, 2007

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am install xp sp2 on intel pantium 4, ddr1 ram(256mb), intel mother board & lost sound & display drivers so help for download these driver


Go to IBM's official website. Click on free drivers download. Select your model and operating system. Download drivers and install in your PC.

Aug 03, 2010 | IBM Netvista Intel Pentium 4 2.4GHz /...

1 Answer

No display on mother boards


Are these computers all emachines? this board is normally used in the emachine range of computers and have a problem with the architecture Call me ? chris http://www.motherboardsrus.net 07926-106150

Jun 05, 2009 | Intel D845GVSR Motherboard

1 Answer

No display on computer


First thing is do you have a beep when the system boots? Sounds like you may have a BIOS issue I would start there........your RAM and processor are more than likely NOT the problem

Apr 15, 2009 | HP Pavillion a818n Desktop PC (Refurb)...

1 Answer

No display in a board


hello
the beep is due to ram
try to remove ram and insert again while power is off

Nov 20, 2008 | Intel PENTIUM-4 865GV CHIP MOTHER BOARD...

4 Answers

No display


hi
if you known about your all SMBS, RAM ,, PROCESSER, & HD Are all ok
  1. chack your ram then clean your ram slot
  2. smps ok
  3. about me your screen is black
  4. chang your bios battery 1st
  5. you use any video card...

Mar 03, 2008 | Intel PENTIUM-4 865GV CHIP MOTHER BOARD...

7 Answers

Intel motherboard 845gvs


intel 845 gvsr motherboard have two most problem

vrm circuit fail IC ADP3168 {between the cpu and core volt connector}
f7338 mosfet ic fail {between the memory slot and ide connector}

Feb 26, 2008 | Intel Motherboard

2 Answers

Intel 845 chipset mother board no reaction - expecting solution


Hi,
this is normal No-Ram. No-Beep.
The ram is all part of the bios analysis beep codes.
install memory, and setup the board to the manufacturers specification.
1 beep at post is normal on many bioses.
Mike @ compurepair.

Feb 22, 2008 | ASUS P4BGL-MX 845GL (AS04P4BGL-MX)...

4 Answers

Ram support for intel 845 motherboard


Ok. So you've defined the Intel 845 chipset on your motherboard.

But is it the 845 or 845G chipset?

Click HERE for the specifications of the Intel 845 chipset.

Click HERE for the specifications of the Intel 845G chipset.

Peepnklown is only HALF right.

The Intel 845 chipset does NOT support PC133 memory.

The Intel 845G chipset DOES support both DDR and PC133 memory.

The difference?

The 845 has a single memory controller for DDR memory.

The 845G has two memory controllers. One for DDR and one for PC133.

Although you're going to need DDR memory as it is FASTER and less expensive than the older PC133 memory. (Believe it or not.)

I do NOT recommend using Corsair's ValuSelect memory on this chipset. I have two boards with the 845G chipset and that type of memory does not allow the board to boot.

These boards typically come with DDR266 (PC2100) modules installed.

I would go ahead and buy DDR333 (PC2700) memory for it. The board you have may not utilize the full speed of that memory, but will use tighter memory timings if the RAM is clocked down by the board. This will result in better efficiency of memory use by the processor.

Think of it as giving the motherboard "breathing room".

I could recommend PNY memory for the most basic compatability. (Not that they manufacture their own RAM modules...) Or perhaps Nanya, Infineon or Microtek.

Look for memory compatability lists for your particular motherboard module online. You could also use PNY's memory configurator on their website.

Click HERE for PNY's memory configurator.

Good luck.

Cyryl

Nov 10, 2007 | Intel Motherboard

Not finding what you are looking for?
Intel PENTIUM-4 865GV CHIP MOTHER BOARD (MBP4I65GV) Motherboard Logo

Related Topics:

552 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Computers & Internet Experts

Alun Cox

Level 3 Expert

2679 Answers

Ekse

Level 3 Expert

13434 Answers

Joe Negus
Joe Negus

Level 2 Expert

652 Answers

Are you an Intel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...