Question about Texas Instruments TI-83 Plus Calculator

Re: Conversions

The TI 83 doesn't have unit conversions built in, but they can be programmed. Take a look at http://www.ticalc.org for existing programs.

You can download a Guidebook from http://education.ti.com

Posted on Feb 19, 2010

30 millimeter = 1.181 102 362 2 inch

you can use a online converter like these:

Online Conversion Common Length Conversions

or

Distance and Length Conversion Online Units Converter

never had any of those give me an incorrect conversion

you can use a online converter like these:

Online Conversion Common Length Conversions

or

Distance and Length Conversion Online Units Converter

never had any of those give me an incorrect conversion

Dec 07, 2014 | Calculators

1 stone = 6.35029 kg 1 kg = 0.157473 stone

http://www.metric-conversions.org/weight/kilograms-to-stones.htm

http://www.metric-conversions.org/weight/kilograms-to-stones.htm

Nov 30, 2013 | Calculators

What do you want to convert your calculator to? Or are you asking how to do conversions on a particular make and model calculator?

Oct 30, 2013 | Calculators

On the calculator there are conversions of capacity (gallons (US or UK) to liters, liters to gallons (Us), gallons(UK) but there are no conversions from ft^3 to m^3. However you have the basic conversions from in to cm, cm to in, yd to m and m to yd. That is all you need.

To use the calculator to perform a conversion from ft to meters, you enter the number of feet, you press [SHIFT][8] (Conv).

The calculator prompts you to enter a number between 01 and 40. Each number corresponds to a particular conversion. In this case you enter 03

For example convert 3 ft to meters.

Enter 3

Press [SHIFT][8] (Conv)

Prompt: CONVERSION Number 01--40

You enter 03 (ft to m) and press [=]

Calculator displays 3 ft >m, and on the second line 0.9144

Thus**3 ft=0.9144 m**

Once you know how to convert one unit of length to another, you get the volume by raising conversion to the 3rd power.

For this to work, you must convert all dimensions to the same unit.

To use the calculator to perform a conversion from ft to meters, you enter the number of feet, you press [SHIFT][8] (Conv).

The calculator prompts you to enter a number between 01 and 40. Each number corresponds to a particular conversion. In this case you enter 03

For example convert 3 ft to meters.

Enter 3

Press [SHIFT][8] (Conv)

Prompt: CONVERSION Number 01--40

You enter 03 (ft to m) and press [=]

Calculator displays 3 ft >m, and on the second line 0.9144

Thus

Once you know how to convert one unit of length to another, you get the volume by raising conversion to the 3rd power.

For this to work, you must convert all dimensions to the same unit.

Oct 28, 2013 | Casio FX-115ES Scientific Calculator

Your calculator may or may not have a program for unit conversion, but the best method is to understand the metric system so you can do these conversions without a calculator. A meter is the same as 100 centimeters, so divide 11390 by 100 to get 113.90 m^3.

Rather than relying on a calculator, I highly recommend taking the time to practice metric conversions. It is very common for high school and even college professors to try and trick you by, for example, requesting the answer in centimeters when the question is in meters.

Rather than relying on a calculator, I highly recommend taking the time to practice metric conversions. It is very common for high school and even college professors to try and trick you by, for example, requesting the answer in centimeters when the question is in meters.

Aug 29, 2011 | Texas Instruments TI-84 Plus Calculator

About 742 million.

Not all the conversions are built into the fx-115ES (the list of conversions is printed on the inside of the calculator cover), but here goes.

First, if you don't know it, get the conversion factor from meters to inches. There's no single conversion for this on the calculator, but one way is to convert from 100 cm to inches by pressing

1 SHIFT 02 =

Store this result for future use by pressing

SHIFT RCL (-)

A hectare is 10000 m^2, so 47.90 ha is 479000 m^2. Now convert this to in^2 by multiplying by the square of the stored result. Press

4 7 9 0 0 0 * RCL (-) x^2 =

And you'll see the answer.

Not all the conversions are built into the fx-115ES (the list of conversions is printed on the inside of the calculator cover), but here goes.

First, if you don't know it, get the conversion factor from meters to inches. There's no single conversion for this on the calculator, but one way is to convert from 100 cm to inches by pressing

1 SHIFT 02 =

Store this result for future use by pressing

SHIFT RCL (-)

A hectare is 10000 m^2, so 47.90 ha is 479000 m^2. Now convert this to in^2 by multiplying by the square of the stored result. Press

4 7 9 0 0 0 * RCL (-) x^2 =

And you'll see the answer.

Jun 25, 2011 | Casio FX-115ES Scientific Calculator

1 Kilogram (Kg) = 2.20462 Pounds (Lbs)

1 Pound = 0.453592 Kilograms

See the following links for Online Conversion Calculators:

http://www.metric-conversions.org/weight/kilograms-to-pounds.htm

http://www.metric-conversions.org/weight/pounds-to-kilograms.htm

Just use your mouse to click on the link, which is the underlined and highlighted text just above. This will open a new web browser page automatically for you and allow you to view the information at the website indicated.

Good luck.

1 Pound = 0.453592 Kilograms

See the following links for Online Conversion Calculators:

http://www.metric-conversions.org/weight/kilograms-to-pounds.htm

http://www.metric-conversions.org/weight/pounds-to-kilograms.htm

Just use your mouse to click on the link, which is the underlined and highlighted text just above. This will open a new web browser page automatically for you and allow you to view the information at the website indicated.

Good luck.

Apr 22, 2011 | Calculators

Hi,

There is nothing wrong. For all units except temperatures you use the [|=>] the arrow operator to convert from one to anther. For temperature conversions however, you must use the** tmpCnv( **command.

**Exemple of syntax**. tmpCnv( is accessed through the catalaog or enter using the Alpha_shifted keys (Ti89)

**tmpCnv( 100_ deg C,_ deg F)** [ENTER] should give 212

You should explicitly enter the underscores, the degree symbols and the C, and F. The last two need not be capital letters).

Hope it helps.

There is nothing wrong. For all units except temperatures you use the [|=>] the arrow operator to convert from one to anther. For temperature conversions however, you must use the

You should explicitly enter the underscores, the degree symbols and the C, and F. The last two need not be capital letters).

Hope it helps.

Dec 02, 2009 | Texas Instruments TI-89 Calculator

rind the exchange rate, perhaps at a site such as:

http://www.x-rates.com/

so, for example, 1 euro is apparently worth 1.4765 US$ at the moment.

if you have 13.82 US$ divide by 1.4765 to get 9.36 euro.

if you had 32.00 euro then multiply by 1.4765 to come up with 47.25 US$

http://www.x-rates.com/

so, for example, 1 euro is apparently worth 1.4765 US$ at the moment.

if you have 13.82 US$ divide by 1.4765 to get 9.36 euro.

if you had 32.00 euro then multiply by 1.4765 to come up with 47.25 US$

Oct 13, 2009 | Casio Calculators

Read the screen capture about the MODES of this calculators. DEG,RAD, and GRAD remind the user that the angle units in trigonometric function calculations and coordinate conversions are in degrees, radians or grads. They have nothing to do with the other calculations you are doing.

You can only remove DEG by changing the angle unit to RADians or GRADs. In so doing, the new unit indicator (RAD, GRAD) will be displayed instead. There is no point worrying about the angle unit indicator unless you are performing coordinate conversions or calculating trigonometric functions or the inverse trigonometric functions.

MODE 9 cancels the FIX display format: decimal are displayed with a fixed number of decimal places (set by the user). After this key sequence the decimal display format reverts to NORM(al).

You can only remove DEG by changing the angle unit to RADians or GRADs. In so doing, the new unit indicator (RAD, GRAD) will be displayed instead. There is no point worrying about the angle unit indicator unless you are performing coordinate conversions or calculating trigonometric functions or the inverse trigonometric functions.

MODE 9 cancels the FIX display format: decimal are displayed with a fixed number of decimal places (set by the user). After this key sequence the decimal display format reverts to NORM(al).

Dec 03, 2008 | Casio FX-260 Calculator

254 people viewed this question

Usually answered in minutes!

×