Question about Kyocera Mita KM-2530 Laser Printer

2 Answers

Printing problem everytime i print the printout says management error code.. whats this!

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.


    An expert whose answer got voted for 20 times.

  • Expert
  • 36 Answers
Re: printing problem

Are you using codes? Maybe you turned on the accounting function for the printer. Is it asking you to enter a code when you send the print job?
When I set up the print driver, I enter the code in the driver so I don't have to put it in every time.
Have you recently changed ID codes?
Is the right accounting code in your driver?
The machine will also go into "printer error" if you don't have the right paper size installed that it is looking for. Also, remember the machine will not auto-rotate in the printer mode.

Posted on Jan 18, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.


    An expert whose answer got voted for 20 times.

  • Expert
  • 56 Answers
Re: printing problem

Press Copier management button and You can see what is wrong in management settings.probably You reached some limitations adjusted in management mode.Default pasword for copier management is 2500.
If you dont know what to do, switch off copier management.

Posted on Nov 13, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

41.2 error hp laserjet 5200

41.2 error hp laser jet 5100
am from Ethiopia but when am check and replace the Formatter board ,beam not working but when am replacing the DC controller and all connecting cables to beam, then it was working god .

Feb 04, 2014 | HP Hewlett Packard LaserJet 5200 Printer

1 Answer

I have a Canon IPF 700. After i clean the print head it showed error code 03800500-2F2F .what is the problem and how to fix it?


The head management sensor detected an ink discharge error.
A sensor sensitivity error was detected during head management sensor position adjustment.

Possible solution is to reinstall your old print head or replace print head with new one.

Aug 08, 2011 | Printers & Copiers

2 Answers

Can it (HP deskjet F380 all in one) still print with only color cartridge or only black cartridge ? Or Should two cartridges remain together to print even one is empty ? Thanks

the answer to your question is yes,it can still print with only one cartridge installed.
If you do not have a replacement cartridge, and the quality of your printouts is not a concern, you can still print in ink-backup mode. Consider the following guidelines before printing in ink-backup mode:

  • If you remove the tri-color cartridge, printouts will be in grayscale.
  • If you remove the black or photo cartridge, the product will print more slowly and the colors in the printouts will vary.
    press OK button to clear the error message like cartridge missing after removing one cartridge.

Jun 20, 2011 | HP DeskJet F380 All-In-One Printer

1 Answer

Printing to much red. the picture in print shop looks fine but actual print is to red or pinkish.

you'll need to install a color management profile matching your printer, or use manual settings in Photoshop (if that's what you're using) so that the software will issue a lesser red image to compensate for the overly red printouts of your printer.
Another point to consider is that printshops may be using a lot more sophisticated print machines than our everyday laser printers. Also, from what I've read sofar, most color laser printers are optimized for charts, tables and text printouts. Image printing isnt their favorite thing to do.

Dec 21, 2010 | OKI C3400n Laser Printer

1 Answer

I am having problem in taking printout from TOSHIBA E STUDIO 166

You are trying to print to paper size that is not installed in the machine. Check what paper is installed in the machine then set your software application default paper size to the same value and then print away!

Sep 10, 2009 | Toshiba e-Studio163 Copier

1 Answer

Hp designjet 500 (42'')

1. remove your catridge
2. remove or change the foam which is located
at the bottom of catridge head
3. hope this will help you to solve your problem

Jun 16, 2009 | Printers & Copiers

2 Answers

Unexpected size in tray 2

whenever i took printout of a multipage file of Powerpoint. Everytime i have to preses the ok button to proceed with the print. because every page an eror comes displaying on screen of printer "UNEXPECTED SIZE IN TRAY 2" when i press the OK button it start printing the page. everytime i have to press the ok button to take print out. For example if i give a print command to a file that is having 15 pages. i have to press 14 times the ok button to complete the printing of 15 pages. pls help me in this

May 14, 2009 | HP LaserJet 2840 Printer

1 Answer

Xerox DC12 Fiery EX12 Print missaligment

caopy can be set by NVm Code 720-001 for side A
720-002 for Side B
please note down initial values before changing it

Apr 21, 2009 | Xerox DocuColor 12 Color Copier

Not finding what you are looking for?
Kyocera Mita KM-2530 Laser Printer Logo

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kyocera Mita Printers & Copiers Experts

NewYork kyocera HP...

Level 3 Expert

513 Answers

Henry Gertcher

Level 2 Expert

46 Answers

Kevin Cole

Level 1 Expert

45 Answers

Are you a Kyocera Mita Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides