- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
most cars IT is deep in the IP cluster
only the SM service manual shows this.
door AJAR CHIME
THE DOOR OPENS AND DOOR CPU SENDS THIS
DATA FACT TO THE CLUSTER, (ON THE MX DATA NETWORK AND THE CLUSTER CHIMES.
if the chime is bad say so? we can not guess goals.
or too loud or what?
I think you could
use this manual method instead.. My nephew who is a full time mechanic uses most of the times, and all mechanics look up to manuals. It's very easy Here's the website he bought it from. www.reliable-store.com
If the chime includes the cab light staying on as well: There is a door switch in both the driver and passenger side doors that needs attention. I too had this problem. Solution: squirt wd40 onto the switch located near the door latch on both driver and passenger side.
In most vehicles the "chime" is located in the dash around where your 4 way flaser is.
It could simply be the door switch also which is a little button that depresses when you close the door to open the circuit shutting the dome light and chime off.
They are easy to change and inexpensive.
Hope that helps.
2000 Mazda 626
Note:Make SURE the battery is new. Instructions for programming ONE keyless remote fob. 1.Open the driver’s door & leave open. 2.Insert the key in the ignition. 3.Turn the key to the on and off position 3 times. 4.Remove the key from the ignition. 5.After door open chime stops, press the door open button 3 times. 6.After chime, press any fob key twice. 7.After second chime, press any fob key twice again. 8.After third chime, press any fob key twice again. 9.Press the door open button once. 10.The car should give another acknowledgement chime. 11.Test key fob. This DOES work. I just programmed mine successfully today, three hours ago.
×