Question about Cameras
I have a Luminox Z911TX touch screen digital camera and cannot find the manual and I am unable to get the camera to switch on, I was wondering if anyone can help: it is displaying a red circle with a line through it on the screen, it also shows a hand, suggesting not to touch the screen. Any help would be appreciated.
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
This is a defective CCD and is being replaced free of charge by Canon. Go here to get details on returning to Canon for a free repair: http://www.imaging-resource.com/badccds.html
Posted on Nov 26, 2006
Defective ccd imager!! company will replace this ccd imager free of charge. Year 2002 up to 2005 released unit has a factry defect ccd imager. the company recalled these unit and replaced with a stronger version of ccd imager. check it out.
Posted on Sep 08, 2007
SOURCE: Minolta Z1 Digital Camera
I followed the directions that were posted on the free suggestions on your site:
Turn the camera on in viewfinder mode. Turn it off and turn it upside down in your hand.
Smack the bottom of the camera several times with your other hand.
Turn it back over and turn it back on. It took me three tries, but voila, on the third try, it worked!
I could see through the viewfinder again.
Posted on Jan 12, 2009
You don't state whether this happens all of the time or only when the flash is active.
If only when active, then the user manual for your camera states that this indicates the flash on your camera is charging and that if you remove your finger from the shutter button it should clear (p.168). In practice it should also clear with the flash is in the retracted position and the flash function is turned off. If it's due to an actual fault then it can be caused if the capacitor or the thyristor charging circuitry has failed. If so it's uneconomical to repair.
If this is the case, then the cheapest and quickest fix will be to disable the pop up flash in the menu (user manual p.95, Set Up 2 > Speedlight Options > Pop Up > Off) and to then use an external flash unit. This also has the advantage of giving you a far more powerful and better quality flash unit.
If the error message occurs whether the flash is retracted or not, then there's a fault with a tiny button switch which senses when the flash has popped up. As your camera is about eight years old now this will be completely impractical to repair and you can only hope that the camera will ignore it if you disable the internal flash as indicated above.
I hope that you have found my answer to be of use; please remember to take a moment to rate my answer.
Posted on Mar 01, 2010
Tips for a great answer:
Aug 20, 2014 | Panasonic Lumix DMC-FX30 Digital Camera
Feb 23, 2013 | ZEEPAD Brand 7inch 4gb Android 2.3 Tablet...
Dec 07, 2012 | Kodak EasyShare V1073 Digital Camera
Aug 05, 2012 | Polaroid T Cameras
Apr 25, 2011 | Cameras
Jun 07, 2009 | Luminox Marine 1590 Wrist Watch
60 people viewed this question
Usually answered in minutes!