I need to replace my Kenmore He3t washer (110-42932-200) but am hoping to reuse the pedestal. Will this work with current Whirlpool Duet models (LG now makes Kenmore)

Thsi video could show you how to repair it Troubleshooting and Repairing the F11 Error Code in Whirlpool Duet Washer

i'm not sure on the part number though

After years of suffering from random F11 that became a permanent F11, I did the repair as in the video and all is good for 2 years. No more F11. About one load a day (we have kids!)

Even though the Sears brand is made by Whirlpool, the 110 series is an exclusive line. IT is not likely to fit. You will have to measure the base and mounting holes on the pedestal and the machine.

April 8 2002 DIV 26 SOURCE 110 KENMORE ELITE HE3 & HET WASHERS "ADD-A-GARMENT" INDICATOR LIGHT ON DOOR WON'T UNLOCK WHEN PAUSE/CANCEL BUTTON IS DEPRESSED.

MODELS: See additional page for Kenmore model numbers

COMPLAINT: Due to a Microcomputer Machine Control software error , the ADD-A-GARMENT feature becomes inoperative.

CORRECTION: The Microcomputer Machine Control must be replaced with a service part that has been reprogrammed to prevent ADD-A-GARMENT feature loss.

PARTS: Order electronic control listed on this service flash by model from Division 26 , Source 110 following normal ordering procedure.

MERCHANDISE CODES: WASHER Service Flash - Model Nurnbers for: Kenmore Elite HE3 & HE3t Washers: "ADD-A-GARMENT" indicator light on door won't unlock when Pause/Cancel button is depressed. Kenmore models with serial Numbers beginning with CSL23 through CSM04 11042822200 11042824200 11042826200 11042832200 11042834200 11042836200 11042922200 11042924200 11042926200 11042932200 11042934200 11042936200 Electronic conrrol p/n 8181900 Electronic control p/n 8181899



Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

You need to replace the door switch , and MCU.
usually.

http://www.managemylife.com/mmh/lis_pdf/OWNM/L0704196.pdf
manual link above fro troubleshooting advise.
http://www.appliance411.com/service/repairmanual.shtml


another repair manual. http://fixitnow.com/wp/2005/09/23/whirlpool-duet-kenmore-he3t-washer-repair-manual/ DIY above

E47, no spin.
Replace the door lock.
To learn more about your washing machine, or to order parts, click here.
Related Posts:

• How to Replace the Door Switch on a Whirlpool Duet or Kenmore HE3t (and HE4t) Front Loading Washing Machine
• ddo Error Code on a Frigidaire Front Loading Washer
• Frigidaire Affinity Front Loading Washer Error Codes
• Whirlpool Duet Washer Door Latch Stuck in Lock Position; Washer Repair
• Replacing the Door Latch Assembly in a Kenmore / Frigidaire Front Loading Washing Machine

replace the mother board and you should be ok

I found this site, they actually repair the CCU for you. Mainly for the F11 Error Code. I see on the site that they have repaired 95 of them with 100% feedback.
http://cgi.ebay.com/Whirlpool-Duet-Kenmore-HE3T-CCU-Repair-For-F11-FDL-Code_W0QQitemZ230397337074QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item35a4c05df2#ht_2034wt_1165

goto Sears.com .. look under parts.. key model # if you have it..

You can go near hardware if nothing stock you may go to washing machine junk shop you can select any part as you wish.