Question about Sony FD Trinitron WEGA KV-32FS120 32" TV

3 Answers

SONY WEGA KV27FS120 WON'T TURN ON, LED BLINKS A FEW TIMES

My set is only 2 yrs old, it worked fine, but one day just won't turn on, I don't feel any magnetic force on the screen, the led blinks a few times, but will not turn on, what's wrong?

Posted by on

  • 9 more comments 
  • leo t Nov 16, 2007

    My tv set is only 2 yrs old, like capri's 123 ,,,SONY WEGA KV27FS120 ,it just happen today, last night the tv was working fine but this morning i want to watch it and won't turn on i try to turn it on manually and with the remote control and all i get is just the led to blink a few times ,and two or three clicks,i search the internet and somebody post that the blinks are some kind of a code ,,,any way ,,the funy thing is that we have the very same problem and almost the same date (3 days later),i think this is a very common problem with this sony model ,,,,please send comments and solutions

  • Anonymous Nov 18, 2007

    TV wont turn on and standby light blinks seven times

  • Anonymous Nov 25, 2007

    I have a KV-24FS100 and have the same problem the Stand By/Timer light blinks three times, pauses and then does it again. Any solution?



    Any help would be appreciated.



    Thanks!

  • barbara48 Dec 08, 2007

    Sony Wega KV-36FS120. I have had this TV for 3 years, low to average use. about a week ago it wouldn't always turn on..sometime s in would and sometimes it would not..the red light on the TV front is blinking. I thought I had pushed some type of timer, in error. as of yesterday it will not go on at all. I have searched the internet and found hundreds of complaints about this type of problem with Sony...I hesitate to call in a serviceman (to big to take out) because most say it never gets fixed and the cost is high and not worth it.. Any one had any luck with this repair???

  • handygal Dec 10, 2007

    I am having the same problem with our Sony Wega 32". I was watching TV last night before I went to bed, so I was the last one to use it. This morning I tried to turn it on with the remote, I get standby light that blinks 6 times then a pause and repeat. I also tried to power it on with the power button on the front of the TV with the same results. We have had the television for approx 2 1/2 years. It seems odd to me that there are so many people posting recently with the same problem, hmmm makes me wonder. Any help with this problem would be appreciated. Not an option to replace it right now with xmas here.

  • whodat1 Dec 25, 2007

    This is the boat I'm in. Standby mode & 7 blinks. As the last poster asked, is this worth repairing????

  • rcomeaul Jan 09, 2008

    I have the same TV and it won't go on either. The LED blinks 5 times.

  • Anonymous Feb 23, 2008

    I have same problem. & 7 blinks will not come on. Was three years old when it occured. Called service center 200 dollars to repair..

  • Baljinder Ubhi Jul 25, 2008

    YES, SAME WITH MINE, CAN'T TURN IT ON

  • mistry_7 Jul 26, 2008

    yes i have same problem please help me

  • fred6736 Oct 20, 2008

    I have the same problem as several have reported, 3 1/2 year old Wega "32 , when you push the on button, you get audio for a very few seconds but no picture, then it turns off with the timer light blinking 6 times!

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have a SONY WEGA 3 years old KV-32XL90E and have the same problem the Stand By/Timer light blinks 16 TIMES, pauses and then does it again.The sound is but no picture.

Posted on Jan 04, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

On another website I saw that many people who had this problem fixed it with a hairdryer. There is a humidity shut off in back, in the lower right section of the TV (looking from the front). Heating that area for ten minutes has saved a lot of TVs. I am going to try it by removing the back cover, which may be dangerous due to the stored electric charge in the picture tube. Another solution was to find a black phillips head screw adjustment on a small circuit board in that area, and turn it to adjust the humidity shut off. Good luck!

Posted on Apr 12, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

This is the second time the standby light has blinked and the TV is having issues for me. The first time repairs needed were to flash the default programing back to the motherboard by a repair shop. Now that my TV is out of warranty I was hoping that someone knew were to get the programming technology without paying an in home service call? Just too expensive.

Posted on Feb 25, 2008

×

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 267 Answers

SOURCE: SONY WEGA KV27FS120 WON'T TURN ON, LED BLINKS A FEW TIMES

YOU HAVE A PROBLEM WITH THE DRIVE IC OR HORIZONTAL CIRCUIT. TAKE IT TO AUTHORIZED SONY SERVICER.




EST $150.00 PARTS AND LABOR

Posted on Jan 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

KV-HP212M83 greenish blackout blinks 2 times


Measure B+ on the set , If normal check G2 voltage


G2 adjustment is on the Flyback Transformer

Oct 14, 2012 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

My Sony wega tv won't turn on goes into standby red light blinks 10 times then shuts off?


Look at the owner manual as the 10 blinks is a error code or Google the model number to locate that information--Sony error codes are general and often misleading.

I would if looking at the set inspect the lamp first.

Aug 28, 2012 | Sony Grand WEGA KDF-42WE655 42" Rear...

1 Answer

Sony kv36xbr800 won't turn on -standby blinks 2 times pls help


Two blinks - B+ over current protection (OCP), unit goes to the standby mode then displays the 2 blink fault. Could be a short in the power supply of any of the circuits.

Apr 22, 2012 | Sony FD Trinitron WEGA KV-36XBR800 36" TV

1 Answer

I have a sony TV model KV-28ls36u, the problem was, when power is turned-ON, the LED blinks 11 times, what would be the best solution for this and where can I get a service Manual. Please help. Thanks


usually after 4 or 5 yrs EHT ( transformer that supplies voltage to tube ) becomes weak - then TV won't get ON.. means no picture no sound but LED blinks - in some TVs along with EHT 1 or 2 components like resistor, transistors, etc will also gets deffective - so solution is TV circuit board has to be checked to find whether only EHT is deffective or other components are also deffective - price of EHT will be between Rs.250 to Rs.600 - iam service engineer (computers, laptops, printers,etc) - bangalore - domlur - 09986222774 - sathyavijayasarathibabu@ymail.com - if you are in bangalore then you can call me for service

Apr 09, 2011 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

My sony trinitron when i powered it off the past three times it takes long to turn on we then started keeping it on now the power went out in the house when the power came back on the tv has been blinking...


usually after 4 or 5 yrs EHT ( transformer that supplies voltage to tube ) becomes weak - then TV won't get ON.. means no picture no sound but LED blinks - in some cases (like yours) it will take few mins for TV to get ON - in some TVs along with EHT 1 or 2 components like resistor, transistors, etc will also gets deffective - so solution is TV circuit board has to be checked to find whether only EHT is deffective or other components are also deffective - in your case only EHT is deffective - price of EHT will be between Rs.250 to Rs.600 - iam service engineer (computers, laptops, printers,etc) - bangalore - domlur - 09986222774 - sathyavijayasarathibabu@ymail.com - if you are in bangalore then you can call me for service

Apr 06, 2011 | Sony FD Trinitron WEGA KV-32FS120 32" TV

2 Answers

I have power but it will not turn on. unplugged from power cord overnight then plugged into wall worked fine until i shut it off again, now it keeps blinking the delay light


go to turn tv on,hear a poping noise,once then tv standby lite blinks 3 times repeatily but no picture or audio.can you help me out with this thank you

Feb 14, 2010 | Sony FD Trinitron WEGA KV-36HS510 36" TV

1 Answer

Sstandby light blinks & doesn't turn on.


Unplug TV from the power outlet and let it sit for a few minutes, then plug it back. It sould work normally after that.

Apr 28, 2009 | Sony FD Trinitron WEGA KV-36XBR800 36" TV

1 Answer

Tv won,t come on now


i have a kp51ws520 that i just fixed. it blinked 9 times. found out it was the g board. got it done pretty cheap . let me know if you need more info.

Feb 05, 2009 | RCA Scenium D40W20 40" Rear Projection...

6 Answers

SONY WEGA KV27FS120 WON'T TURN ON, LED BLINKS A FEW TIMES


I don't know if this will help anyone else, but I sure hope it will. I had a similar problem with TWO of the three Sony 24" TVs I had bought together. TV#1 konked out a month ago; TV#2 messed up last week. So I called the Sony Service Center, and this very nice guy told me that a lot of times this problem occurs because the TV isn't plugged directly into the wall (most people plug theirs into a power strip/surge protector). When it happened to TV1, we hadn't been using TV2 so we just traded their locations and the "bad" one sat there waiting to be thrown out...and sat and sat and sat. Well, I was pretty hot when it happened again a month later to TV2. The service center guy told me to unplug TV2 and replug it in the wall after about 1 minute and turn it on. Nothing happened. Then he told me to plug in TV1 and turn it on. I did, reluctantly. And it actually worked!! I don't know if anyone having this problem has a week to be without their TV, but the guy said sometimes it takes up to a week of sitting to get it to work right again. So I'm waiting a few more days before I try to plug in TV2 to see if it works again, but for now, at least I've got one TV back. Here's hoping you all have the same experience. And then I guess we'll have to decide whether to plug back into a power strip (mine was actually plugged into my cable TV's DVR machine) or into the wall.

Dec 11, 2007 | Televison & Video

1 Answer

SONY WEGA KV27FS120 WON'T TURN ON, LED BLINKS A FEW TIMES


YOU HAVE A PROBLEM WITH THE DRIVE IC OR HORIZONTAL CIRCUIT. TAKE IT TO AUTHORIZED SONY SERVICER.




EST $150.00 PARTS AND LABOR

Nov 25, 2007 | Sony FD Trinitron WEGA KV-24FS100 24" TV

Not finding what you are looking for?
Sony FD Trinitron WEGA KV-32FS120 32" TV Logo

1,848 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75289 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...