Question about Mitsubishi WD-52525 52" Rear Projection HDTV

2 Answers

Mitsubishi model # vs-5055 will power off after a minute or so

Mitsubishi will not stay on after a minute or so

Posted by on

  • dareckcrane Aug 17, 2008

    I Have the Same problem, Mitsubishi vs-5055 power is on, with sound but no picture, What Can I Do?


  • moose malone Aug 18, 2008

    The tv worked fine in the morning and then later it came on for about 30 min. and then the picture went out, but we still had sound and then finally we had nothing.. The tv will not even show picture or sound. We unplugged the tv and tried to get a picture and sound, but no luck. We know its not our satellite receiver because the other tv works on the same duel tuner. Any ideas.. Maybe the bulb?



2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,694 Answers

Most older TV's require hand-soldering at least once in their lives,esp. regulator pins in power supply circuits.That work
requires the chassis to be pulled = major labor.......T.

Posted on Nov 13, 2007

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

We have a 1994 Mitsubishi 52 or 54 inch, Model # VS 5055. The remote is broken and the parent control is on so we can not use the regular buttons and we cannot shut off the parental controls. Any thoughts?

Posted on Jan 04, 2008


2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 167 Answers

SOURCE: I have a Mitsubishi TV model VS 5055 1994. The

you need to replace convergence IC chips to resolve this issue .

Posted on Dec 19, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a Mitsubishi TV model VS 5055 1994. The

you need to replace convergence IC chips to resolve this issue .

Nov 28, 2010 | Mitsubishi Televison & Video

1 Answer

Mitsubishi Projection TV Model #VS-50603 will not turn on.

The TV is going into a "protect mode", the micro-processor has sensed a circuitry problem and has shut the set down so that no furhter damage can happen, you will need to have the TV serviced by a Mitsubishi tech. Good luck !

Jan 07, 2010 | Mitsubishi VS-50607 50" Rear Projection...

1 Answer

TV turns off on its own

Set may have poor/cold solder connections on power supply board and convergence board.

Dec 17, 2008 | Mitsubishi VS-55707 TV

1 Answer


My mitsubishi 65in projector model # ws65807Just started shutting off it only stays on for few seconds and cuts off. I cant get it to stay on

Jul 31, 2008 | Mitsubishi WS-65807 65" Rear Projection...

3 Answers

Turns off

No I do not have an answer yet

May 19, 2008 | Mitsubishi WS-55805 55" Rear Projection...

1 Answer

VS 5055 has distoration, discoloration, screen not complete.

Do self diagnosis test by pressing input and menu on set at the same time for 5 sec. It should blink a 2 digit code. Remember code and let me know.

Nov 23, 2007 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Mitsubishi VS 4543, Picture go out after a few minutes

I usually find that symptom you describe is caused by cracked solder joints on the power regulators or vertical output IC. I have also seen that symptom caused by loose solder joints on the vertical windings up inside one of the yokes. If you have experience in repairing TV's then you can disassemble the set and pull the main chassis, flip it over and resolder all of the parts mounted on heat sinks. If you do not have experience in repairing projection TV's then allow a qualified tech to handle it for you.

Aug 05, 2007 | Mitsubishi VS-60607 TV

Not finding what you are looking for?
Mitsubishi WD-52525 52" Rear Projection HDTV Logo

Related Topics:

397 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1213 Answers

The Knight
The Knight

Level 3 Expert

75032 Answers

Jaime Hernandez

Level 3 Expert

2326 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides