Question about Hotpoint BWM20 Front Load Washer

1 Answer

Washing machine My hotpoint washing machine starts to spin on the spin cycle then stops abruptly. When I click on the cycle it repeats this and stops.

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Normally these spin problems are just a blocked filter, which is located at the bottom of the washer behind a white panel which you can undo with a coin, drain water first, undo plug from hose into a bowl etc then take out filter and clean, hope this helps.

Posted on Mar 09, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My hotpoint wm63p washing machine when in wash cycle works up until the last spin and then u hear clicking and the machine will skip the cycle and stop or sometimes just continue to the next dial cycle..i...

If you have changed the brushes are satisfied that they are fitted correctly, then it can be a couple of possibilities.
1- The motor itself is faulty.Even though it does the wash o/k it is possible the spin winding is faulty.
2- The prograqmmer is faulty.
Make sure the pump is working o/k, and that all the water has drained out, as this would stop it spinning

Dec 15, 2010 | Hotpoint Washing Machines

1 Answer


Are you sure you don't have a second rinse button that is selected.

Jan 11, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Wash machine stays on wash cycle and doesnt go to rinse or spin

If the water is not getting hot, this will probably stop the programme advancing .Check heater.
Plz rate solution to prob.

Dec 10, 2008 | Hotpoint Aquarius WF000 Front Load Washer

1 Answer

Hotpoint topload washing machine won't water won't stop running.

washer top load will not stop filling even when turned off

Dec 01, 2008 | Hotpoint VBSR3100D Top Load Washer

1 Answer

Noisy Spin Cycle

hi there,

Most noises from a washing machine occur during the spin cycle. If you hear loud thumping/or sound
during the spin, the load of clothes may have become unbalanced. Stop the washer and
redistribute the clothes, then re-start it. Repeat these steps if necessary.

Jun 12, 2008 | Whirlpool LSR9434PQ Top Load Washer

1 Answer

Maytag Atlantis 6451 Stops abruptly at end of rinse cycle

sounds like the brakes squeal to me is that the end of the cycle if it is i would worry about it brakes do that not worth the effort of dealing with

Jan 27, 2008 | Maytag Atlantis MAV6451 Top Load Washer

1 Answer

After spin cycle washer stops abrubtly causing it to shift.

You have dragging brake shoes. This will cause the motor to draw excessive current. Nedd to take apart and pull down spin tube to access the brake shoes

May 31, 2007 | Whirlpool LSQ9600L Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts


Level 3 Expert

1172 Answers

Todd Arndt
Todd Arndt

Level 3 Expert

2044 Answers


Level 1 Expert

48 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides