Question about Fuji FinePix A310 Digital Camera

1 Answer

Button don't work

The camera will turn on, the picture view to take a picture is there, but the date/time etc. will not move. The menu button will not change anything--seems frozen. The dial to change from viewing a picture to taking a picture will not change. However if I change from viewing to taking turn it off then back on, it will be changed.

None of the settings will work. I have changed the batteries with new batteries three times, but camera continues to do the same. Any help will be appreciated!!

Posted by on

  • Anonymous Nov 17, 2007

    Mode dial is stuck - will not move from still mode to playback mode.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

One of the buttons is constant presset in.
Under the button is a metal membrame, sometimes it happens by to mutch force the membrame is defect, it doesn't popup again.
Try to find out witch button doesn feal good anymore, can you work without it ?(for example left macro), open camera and remove membrame.
LKet it repait by fuiji ? a least € 100,-.more than new....

Posted on Nov 15, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does the screen stay black when camera is turned on?


Did you try to press the display button several times? Most of the time you can cycle through different views on the display, with different information during record mode. One is display off.

Jun 18, 2014 | Olympus FE-340 Digital Camera

Tip

Stamp Date and Time on Photos in Canon Digital Cameras


Hello Dear,

In all Canon PowerShot and IXUS series cameras date and time can be stamped on the photos shot in Post Card Size, to set the Camera into this mode do the following:
On Camera in Shooting mode (Live view is visible on LCD)
Press Function/Set button once
From right-left move to the Post Card Size
Press Function/Set again.
Now, Press Menu Button
From up-down move down
On Stamp Date (Option Name written, Visible on the Right top Corner of Screen)
From right-left move and select you want only Date or Date and Time both.
Press Menu again
Now, you are ready.

For more clarification please revert.

Warm Regards,
Joseph Manoj

on May 26, 2010 | Cameras

1 Answer

How do I change the date on my camera?


Hello! Welcome to FixYa!
You can change the date of your
Samsung Digimax A503 Digital Camera. first of all turn your camera on. Now go to the menu by pressing "MENU" button. Now using right arrow key, Go to "Setup Menu". Now using down arrow key, select "Date". Here you can change the date that will be displayed on the captured images and set up the date type.
Here "Right arrow button" select the Year/Month/Day date type and "Left arrow button" is to move cursor to the Date Menu if the cursor is at the first item of the date and time setup.In all other cases cursor will be shifted to left of its current position and "Up and Down button" is to change the settings values. So you can change the date the according to desired format.
For clear picture the image of the menu where date menu is visible on the camera is given below
angel_bird_23.jpg

Don't hesitate to let me know if you want any further assistance.
I hope this solution helps you
Thank you and Keep using FixYa!

Sep 13, 2011 | Samsung Digimax A503 Digital Camera

2 Answers

How do I set the date and time spamp on a Canon A490


Hello and Welcome to FixYa!

To set the date and time stamp on pictures, Follow the given instructions:
Setting Date and Time:

First of all set the exact and time if your camera:
  • Press the "Menu" button on the camera and use the right navigation button to choose the "Set Up" menu.
  • Scroll down to "Date/Time" and press the ""Func./Set" button. The set date and time will appear on the screen, and the month unit will flash.
  • Adjust the month unit by pressing the up or down navigation buttons. Move to the day unit by pressing the right navigation button. Use the same instructions to adjust each unit of the date and time.Push the "Func./Set" button to save the time and date settings.
Setting Date Stamp on pictures:
  • Press the "Func./Set" button and select "Recording Pixels" and "Postcard". The camera is now set to "Postcard" mode.
  • Open the "Rec." menu by pressing the "Menu" button on the back of the camera.
  • Highlight "Date Stamp" by pressing the down navigation button.
  • Change the "Date Stamp" setting by pressing the right or left navigation button. Your choices are "Off", "Date" or "Date/Time". Now, when you take photographs the date or the date and time will appear on the picture.

If this solution helps you then your token of appreciation in the form of Rating as Four Thumbs and a testimonial will be esteemed.
Thanks you for using FixYa!

Apr 11, 2011 | Canon PowerShot A490 Digital Camera

1 Answer

Have never set date on my camera. What do I need to do to accomplish this? Do I needsoft ware, any cords, etc? Tried to go by instructions on line but it didn't work. What am I missing? Thanks


Welcome to FixYa,


Hi I have here the steps on how you can update the date and time of your digital camera. You can chaged it if its your first time to set the date and then you also have here the steps if you want to changed it anytime you want.


Setting the date & time, first time

The Date and Time have been reset message appears the first time you turn on

the camera or if the batteries are removed for an extended time.

1 SET DATE & TIME is highlighted. Press the OK button.

(Select Cancel to set the date and time at a later time.)

2 Go to step 4 below, Setting the date & time, anytime.


Setting the date & time, anytime

1 Turn on the camera. Press the Menu button.

2 Press to highlight Setup Menu , then press the OK button.

3 Press to highlight Date & Time , then press the OK button.

4 Press to adjust the date and time. Press to advance to the next

setting.

5 When finished, press the OK button.

6 Press the Menu button to exit the menu.


Reminders:Depending on your computer operating system, Kodak EasyShare software may let your computer update the camera clock when you connect the camera.


I hope this steps will let you to resolved your issue.

Feel free to reply on this e-mail if this steps will work or won't work.


Thank you for using FixYa.

Mar 23, 2011 | Kodak EasyShare CX7330 Digital Camera

1 Answer

I have a kodak easy share M1073 and cannot figure out how to reset the date. I can turn the date stamp on and off but that's the only option I have.


It's important to set the date and time so that pictures and videos are organized by the date taken. The date and time procedure varies slightly between camera models, but generally:
  1. Turn on the camera.
  2. Press the Menu button.
    If you see a Setup tab, press the Right arrow button to highlight the Setup tab. If you don't see a Setup tab, press the Down arrow button to select Setup, then press the OK button.
  3. Press the Down arrow button to choose Date and Time (or similar), then press the OK button.
  4. Press the Right/Left arrow buttons to move between year, month, and date. Press (or press and hold) the Up/Down arrow buttons to scroll through the year, month, and date.
    Use the same procedure to set the time.
  5. When finished, press the OK button.
NOTE: If your KODAK Camera has a touchscreen, the same principles apply. Tap the Menu icon, Setup, then Date and Time (or similar).

Nov 03, 2010 | Kodak EasyShare M1073 IS Digital Camera

1 Answer

How to seup date and time on the screen when we


Hello Dear,

In all Canon PowerShot and IXUS series cameras date and time can be stamped on the photos shot in Post Card Size, to set the Camera into this mode do the following:
On Camera in Shooting mode (Live view is visible on LCD)
Press Function/Set button once
From right-left move to the Post Card Size
Press Function/Set again.
Now, Press Menu Button
From up-down move down
On Stamp Date (Option Name written, Visible on the Right top Corner of Screen)
From right-left move and select you want only Date or Date and Time both.
Press Menu again
Now, you are ready.

For more clarification please revert.

Warm Regards,
Joseph Manoj

May 22, 2010 | Canon Cameras

2 Answers

Canon xt menu button will not work. When I turn


I'm pretty sure I heard of those buttons going bad when I was researching used cameras...might have to get it repaired unfortunately...

Saw a few ads on craigslist etc. where person said "camera takes pics fine but menu button stopped working recently". Maybe there's a recall?

Aug 10, 2009 | Canon Rebel XT / EOS 350D Digital Camera

2 Answers

Canon sd 750 how to put the date in the picture?


here is the solution:
The date and time can be included on the pictures taken only with the camera in postcard mode. You must also activate the date stamp option in the menu.
To set the camera into postcard mode, press the [Func.] button on the camera, then use the [arrow down] key to go down to the last option in the menu, and there you can choose the [Postcard mode]. Press [Func.] again to exit the function menu.
dsc_include_date01_tcm14-520510.jpg
To set the date and time stamp, press the [Menu] button and then use the [arrow down] button to go to the [Date stamp] option in the menu. You can set this to "Date" or "Date & Time". Press the [Menu] button again to exit the menu.
dsc_include_date02_tcm14-520511.jpgyour date and time are set now
congratulations!
Rate this answer if it is working with you
thank you
with all my best regards
huetrichard@gmail.com

Feb 25, 2009 | Canon PowerShot SD750 / IXUS 75 Digital...

2 Answers

TZ 5 not TZ50! Date stamp.


I have the same camera and the only way to do this is to first, Make sure you have set the date and time correctly on your camera. Take a picture or, view picture you want date & time stamped. Press the circular 'Menu/Set' button. Press down arrow to playback mode. Press right arrow on 'text stamp'. Choose whether to apply stamp to single or multiple photos. Press 'Menu/set' to select photo to stamp. Choose which stamps to add. Date, time, age etc.. Press 'Menu/set' again and select 'Yes' in box. The only problem with this is that it will resize your photos to 3m, which can make them grainier if you took them at a higher res. Gillian

Aug 30, 2008 | Panasonic Lumix DMC-TZ50 Digital Camera

Not finding what you are looking for?
Fuji FinePix A310 Digital Camera Logo

Related Topics:

253 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fuji Cameras Experts

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Steven Wander
Steven Wander

Level 3 Expert

593 Answers

Are you a Fuji Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...