Mother board failure - Panasonic TH-P42A2S 42"" 720p Multi-System Viera HD Plasma TV"

When the mother board goes out, you'll get nothing ever again from it. If it comes back usable each time, it won't be your motherboard. Fix the other stuff.

Most laptop mother boards do not have fuses. Check battery and charger and connection to the laptop. the connector on the mother board for the charger is a common failure point.

Possible failure of the network section in the main board. Please check the main mother board and confirm if there are any traces of moisture or particles.
If there is no result even after the phone is reset then the possibility of fault in the mother board needs an estimation from a Nokia center to decide.

This can be failure of the display driver, failure of the power supply to the display , failure inthe connecction flexible cord to the display or a fault in the mother board.
All these can be confirmed only with a detailed check on the main board.

Possible failure of the mother board/ power supply section. You will need to remove and reconnect the lines from the mother board to the display and sections.
If there is no result even after this with the display staying blank then the board can be faulty.

From the description, sounds like you have two failures, both concerning the mother board.

1. The connection to the motherboard for the battery is no longer good. Replace the mother board. The points of failure that you have given so far and has not fixed the issue. Battery fully charged, seated well, no change, mother board.

2. Laptop will come on with AC adapter attached but will not boot up; mother board. There is a built in test that you can run, from a powered down state press FN + Power button, this puts this into a diagnostic state. If it does not go into this diagnostic; mother board. The diagnostic is stored in the BIOS, which is a part of the mother board.

3. If the diagnostic runs note any error codes that it gives. They will be in the form off XXXX-XXXX or XXXX:XXXX, where the X's represent a letter or a number. These can be used for further trouble shooting.

Tries websites like Shopjimmy.com,Ebay.com to buy the refurbish Tuner board.

They may two types of problem in PC one software corrupted or second may hardware failure. Every branded PC has their mother board disc. you can find it in the box packing of your PC usually they provide installation manual, mother board disc etc on the purchase. search for motion eye web cam driver in the mother board disc before installing it uninstall previous web cam driver from add or remove programs.In case of hardware failure contact service center.

The people who make the mother board are the ones that also have a license to work with the mother board and all of its parts. When you bought your computer, did you not receive a book called Customer's or User's guide, plus two disks?. We also have archives and files where we can help you, but you have not provided us with any information. We can help you fix your computer, but we need some information from you as follows: (1) Name of Computer Manufacturer and Name of Computer; (2) Model Name and Number; (3) The ID of the mother board. If you need help to find it we will gladly help you. (4) We also need the sequence of events, just a while before the failure, during the failure and after the failure. We have a mathematical model of a computer and after we input your information it will become your computer. We will duplicate your problem and when we give you instructions, you will have to follow them. As soon as we receive the info. we are ready to begin the work. Thank you very much for your consideration and your choice of our service. I think we can have you back with sound in your computer as fast as possible. My name is Constantin (arzconst is my internal nickname with Fixya.com)

no its not a driver you have a video chip getting ready to fail.on the v2000 it intergrated in to the mother board. soon you will be joining many other compaq v2000 and m2000 owners in the search for a mother board compaq has updated part numbers it a whole differant board for these units due to having a common failure rate of the original mother boards.Compaq know there was a over heating of the video chip that leads to failure but has not offered any assistance to there customers. [email protected]