Question about Optoma EP732H EZPRO DIGITAL PROJECTOR Multimedia Projector

1 Answer

Orange light on lamp icon on Optoma EP732H Projector

When i push the power/standby button while it is flashing green, it goes to a solid green but in about 30 seconds the orange light next to the lamp icon comes on and stays on for about 2 minutes, then the projector will go back into standby mode where the green light flashes. The only instructions that comes with the manual says to contact the service tech. Can anyone help me with this issue?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers
Re: orange light on lamp icon on Optoma EP732H Projector

This same thing happened to me, I removed the bulb and put it back in, it reset something and I was able to use the projector again.

Posted on Jan 16, 2010

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

NEC lt240 lamp light stays off and power light is orange, no Image



Apr 15, 2013 | NEC LT 240 Multimedia Projector

1 Answer

Optoma HD66 replaced lamp, LAMP WARNING light keeps flashing, still won't turn on?

i just had the same problem i took the top of the projector off and cleaned the color wheel and sensor seemed to have fixed the problem that is for now. seems to happen to me once a year on the dot but last time it was warranty. good luck hope it helps.

Mar 17, 2012 | Optoma Multimedia Projectors

1 Answer

My hd20 has a power-icon light of amber, when power button is pushed it goes to flashing green and it doesn't turn on, just flashes green

Have you tried decreasing the resolution of the computer?
When the resolution is too high for the projector, something similar to your description happens.

Oct 23, 2011 | Optoma HD20 DLP Projector

1 Answer

Optoma ep 1690, the on/standby led is flashing green but when I try to turn it on the temp and lamp led's flash twice and nothing happens, the on/standby continues to flash green.

The projector lamp life may have exceeded its safe limit, check your instruction manual, sometimes you have to hold the on or off button for 10 seconds to reset this. All manufacturers are different but that may be the problem.

Here is a copy of the manual, I havn't read it, my solution is from experience of other projectors.

Good luck

Aug 04, 2011 | Optoma EP1690 DLP Projector

1 Answer

Hello. My Nec LT35 projector will not turn on. From standby mode, I hit the power button, the power LED turns green, the fan starts, but after two seconds it switches back to standby. The...

i have the exact same error with same projector. did you manage to solve this?

my status led blinked red 6 times indicating a "lamp error" which wasn't helpful. i also tried removing and replacing lamp but didn't work.

Dec 01, 2010 | NEC LT35 Multimedia Projector

2 Answers

Powers on but no lamp light

Did you find a solution to this problem? I have the same thing with my Optima 1690...

Jul 09, 2009 | Optoma EP750 Multimedia Projector

2 Answers

Optoma EP755 new lamp when power standby button

you need to reset the lamp timer, usually done by holding some buttons while turning on

Mar 10, 2009 | Optoma EP750 Multimedia Projector

1 Answer

Optoma 719, can't get lamp and fan to turn on.

There is a stuffed 10v 3300uf capacitor on the power board. You need to replace it.
Bellow you can check in the picture where the capacitor is located.
Notice that in this picture I have already took the bad capacitor out and replaced with two small cords to reach the bottom and test the new capacitor.
To reach this place is not fast, several layers of plastic and metal must be removed, but is not a hard task to take the capacitor out and replace it for another.
It works just great! Now it is back on track with awesome image.

Jan 31, 2009 | Optoma EP719 XGA DLP PROJECTOR 2000L...

1 Answer

Only power light will power on for few seconds then flashes.

Does the main lamp light at all? It sounds light a cooling fan failure. If the fan iis not working the the main lamp will not turn on and the power light will flash.

Jan 07, 2009 | Optoma EP755 Multimedia Projector

Not finding what you are looking for?
Multimedia Projectors Logo

1,084 people viewed this question

Ask a Question

Usually answered in minutes!

Top Optoma Multimedia Projectors Experts


Level 3 Expert

2236 Answers

color wheel light...
color wheel light...

Level 2 Expert

137 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5327 Answers

Are you an Optoma Multimedia Projector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides