Question about Washing Machines

3 Answers

Hotpoint ultima wt741

What does this mean, the water won't empty and the door locks error code showing is f-05

Posted by on

  • 2 more comments 
  • Anonymous Dec 05, 2007

    error 3 message appears. Machine will not spin. Water and washing in machine.

  • perett Dec 26, 2007

    After couple of minuts starting the cicle mashine stops and gives the error code F05

  • lizzie p Apr 22, 2008

    after about half way throgh the wash cycle the machine stopped and error code f-12 has appeared on the display, nothing i have tried to do has removed this, door has remained locked so i cant get my washing out off the machine

  • Anonymous May 19, 2009

    I have a Hotpoingt Ultima WT741 which keeps throwing up a fault code F-05 what does that mean?

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Washing machine WT741 ultima all light are flashing and it won't do anything else

Posted on May 20, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

The wt741 I have got was showing F05 fault. I cleaned out the obstruction in the pump and restarted the machine. The machine came started to cycle but then stopped with the display going blank. I unplugged the machine and left it overnight. I restarted it and the display is showing and I can select different programmes but it won`t start help!

Posted on Mar 15, 2011

Ad

Had the same problem a couple of times with my Hotpoint Aquarius. Problem was due to water not being able to drain due to a blockage (sweet wrappers, hair, money and computer games !!". Open the back access panel and loosen the big jubilee clip holding on the rubber drain. Clear any blockage and put unit back together. (All with POWER OFF)

Posted on May 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

F 05


Hello,F05 means that the pump is not getting rid of the water.
You to locate and clean the filter, and or check the pump for a blockage or restriction.

Thanks

May 23, 2010 | Hotpoint Ultima WF860 Front Load Washer

2 Answers

Wd860 showing error F-05. What does this mean?


An F-05 error message means that the pressure switch is jammed on empty or a problem with pump.


The fault is associated with drain out (pump blocked or restricted in some way).

Small panel at rear of machine reveals the pump, pull of the two pipes (Plastic clips hard to get off, slide them sideways), remove wire and unclip pump from base of machine by lifting locking tab and sliding to the left, pump can then easily be cleaned.

Apr 22, 2010 | Hotpoint Ultima WF860 Front Load Washer

3 Answers

My washer hotpoint wt741 is flashing up f05 and wont rinse water out


An F-05 error message means that the pressure switch is jammed on empty or a problem with pump.

The fault is associated with drain out (pump blocked or restricted in some way).

Try this out:
Small panel at rear of machine reveals the pump,
Pull of the two pipes (Plastic clips hard to get off, Slide them sideways),
Remove wire and unclip pump from base of machine by lifting locking tab and sliding to the left,
Pump can then easily be cleaned.

Mar 06, 2010 | Hotpoint Washing Machines

1 Answer

Hotpoint ultima washing machine showing fault code f-05 and door will not open.


Error code F05 indicates pressure switch jammed on full.
Remove lower rear panel of washer.
Remove large black hose on bottom of drum.
Remove and clean filter inside hose.
Remove hose onto pump, and check for blockage or obstruction here as well.

Make sure there is no water in drum before you start.
Please rate my solution.
Thankyou.

Jan 26, 2010 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Hotpoint ultima F-05 errorr appears on machine


Error F05 indicates pressure switch jammed on full.
Remove lower rear cover of washer.
Locate and remove large black hose fastened to drum.
Remove and clean filter inside hose.
Remove hose onto pump, and check for blockage or obstruction here as well.
This should solve the problem.

Jan 10, 2010 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Hi I have a hotpoint washing machine model wt761 and it has stopped working, it will not drain. The display is showing an error code F-05. Can you help me please.


You have a blockage not allowing the drum to empty.
Check for blockages via the pump filter and the hoses
F05 means blocked pressure switch
If it still won't work come back to me

Oct 25, 2009 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Hotpoint ultima washing machine is showing a fault


F 05 normally means there is a blockage or a fault with the pressure sensor. The common place for blockage is in the black pipe from the drum to the pump as it has a filter in here and clogs up. remove the pipe and clean the filter out and remove gunk from the pressure sensor on the side of the pipe as well. If that does not fix things the pressure switch could be faulty itself

Sep 13, 2009 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Error message f-01 on hotpoint ultima wt741 washing machine


F01 is a motor faulty normally caused by the module,but sometimes thewiring to the motor plug that works loose as its to tight,give them alla good wiggle make sure there all in!
check this link for other error codes of hotpoint machines
http://www.hotpointservice.co.uk/hs/pages/content.do?keys=FAQ:ERROR_CODES

Dec 15, 2008 | Hotpoint Ultima WD72 Front Load...

4 Answers

Hotpoint ultima wt741


f11 keeps flashing door won't open

Sep 01, 2008 | Hotpoint Ultima WF860 Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

2,000 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

Brad Brown

Level 3 Expert

18072 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...