How can I get firmware, if it was already deleted from the manufacturer website?

search on google plenty of fw availible but unknown if you can downgrade it without flashing back to stock

Go here: https://portal.infocus.com/support/Product%20Pages/downloads.aspx?mic=LP70%2b&on=downloadsthen down load the file then find the text document "D3 D3+ firmware upgrade instructions.pdf" in C:\LP70plus\002-0870-08\I , or where ever you saved it. That will give you the complete instructions on how to upgrade.

Try resetting the lamp hours it can go into a safe mode if you exceed the expected life of the lamp. It can be done even if there is no image have a look at the infocus website all models vary on the procedure if not try a firmware update to wipe its brain but you will need the leads it was shipped with.

Hi,
For this you need to know the exact model of your motherboard. Your current BIOS firmware version can be seen in the BIOS setup window itself ( Press DEL key during your system startup to enter into BIOS screen)
Your motherboard should have Flash BIOS so as to upgrade its firmware. All latest motherboards will have this type only. Goto your motherboard manufacturer website and search for latest BIOS firmware for your exact model. There itself you can find the utility required for BIOS. download that utility and using which you can update your firmware. Please do update your BIOS only if it is required.
I hopt his is helpful to you

Before anything else, you need to refer to the user manual of the phone and see on how are you going to set the memory card as your default storage.

If it's already set, then the best thing to do is to contact the manufacturer of the phone. Based on the problem, it does not mean that the memory card slot is already gone bad, there could be a possibility that the problem might get fixed by just upgrading the firmware of the phone.

And only the manufacturer knows what's the firmware version that would work best with your phone.

Have a good day!

first reset the settings to factory default. then make sure that the source resolution is 1024x768. select auto search source. swap cables. if still nothing, you need to flash the projector with the latest firmware (check the infocus website).

First try another cable, if you tried that already, then try a firmware upgrade. Infocus has the firmware on their website. If that doesn't work then you have a defective main board.

Contact the manufacturer for a firm ware upgrade. My two brother in laws/sisters own this same pj and had the same issues you are talking about. Once they installed the update [aka: firmware upgrade]it created a solution to the problem.

Let me know how it goes. They can either mail you a CD, direct you to where on their website, otherwise email you the update to download. You have to connect your pj as well.

Let me know how that goes. I'm fairly confident that will fix it. There was a certain time frame [manufacturer dates], and serial numbers that had these issues.

Depends on the manufacturer and model number of your mp3 player - go to manufacturer's website to get the firmware update -if you tell us the manuf/model #, then we can give you an exact link

reset didn't work?