How do I find spare parts for my trident fire

The control knob and timer is powered by a small synchronous electric motor and driven via plastic cogs, they wear out with so many uses and working in a hot atmosphere.

https://www.google.com/search?q=Admiral+dryer+and+the+control+knob+doesn%27t+advance

..

one of these newer ones may work

https://www.ereplacementparts.com/hamilton-beach-roaster-oven-parts-c-139382_207001.html

Or one of these knobs.

https://www.partstown.com/hamilton-beach-commercial/knobs-dials/parts

https://picclick.com/EXCELLENT-ORIGINAL-KNOB-for-Hamilton-Beach-Model-415-203531219157.html

..

First, try to light the burner in question with a match. Just hold a match to the burner, then turn the gas on to low. If the burner doesn`t light, the problem is the gas supply to the burner. Next, lift the top cover and put the prop rod in the hole in the cover to support it. Hold a match to the left-front burner. Now, turn the control knob to "light". You should see the igniter spark and hear a snap. If this doesn`t happen, repeat this step with the left rear burner. If you hear the spark and snap.
If the igniter doesn`t work on the front left burner, but does on the rear left burner, the igniter does work. The problem is likely the control knob for the left front burner. The. Control knob includes the electrical switch the activates the igniter when you turn on that burner.

Hi, do you still have the broken k3000?
I am interested to spare parts.
Where do you live?

Try pacparts.com.

terry, I have to agree with you. There's very little out there concerning your model Trident Fire. However, I did locate a company by the name of Trident Systems Fireplaces in the UK. Here is their website link below and their contact information. Hopefully, they can help you.

http://www.trident-systems.co.uk/index.html

Hi, fault is out in the fan box when the green light does not come on ,could be pressure switch or electronics.I have spares or can repair depending on where you live.

Hi this is a oxy pilot problem as you say, would be best to replace. There are two types that were used on Trident /FEF fires,Ican help with either but need to know which one ,get back to me for further help .Will.