Question about Kenmore Kitchen Ranges
Sometimes the burner holes get clogged. I use a toothpick to clean out the holes.
Hope this helps.
Posted on Mar 21, 2015
First, try to light the burner in question with a match. Just hold a match to the burner, then turn the gas on to low. If the burner doesn`t light, the problem is the gas supply to the burner. Next, lift the top cover and put the prop rod in the hole in the cover to support it. Hold a match to the left-front burner. Now, turn the control knob to "light". You should see the igniter spark and hear a snap. If this doesn`t happen, repeat this step with the left rear burner. If you hear the spark and snap.
If the igniter doesn`t work on the front left burner, but does on the rear left burner, the igniter does work. The problem is likely the control knob for the left front burner. The. Control knob includes the electrical switch the activates the igniter when you turn on that burner.
Posted on Jan 26, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
If they ignitors worked properly before you aunt cleaned them, the problem could be with the way they were cleaned and what they were cleaned with. Please tell me how she cleaned them and with what. Also, had she cleaned them before without incurring any problems, or was this the first time she had cleaned them?
Posted on Dec 03, 2007
its possible your gas regulator is bad or the gas line to the ignitor is stopped up look at the line and see if some type of food has blocked the outlet
Posted on Dec 08, 2007
Apparently there was a water spill around the burner control knob and in the burner itself; We ran the burner to create heat and then turned it off and let the water dry out and evaporate from the burner and igniter area.
Posted on May 28, 2008
SOURCE: Burner will not turn off
I would first check the infinite control switch (#WB24T10029) the part the knob slips onto. The next thing I'd check is the erc (#WB27T10231) control board. Hope that is helpful!
Posted on Jan 15, 2009
check the burner socket, it is likely that contact is being lost where the burner connects to the hardwired portion of the system (the socket). It is not unusual for the socket to "burn up" when there is a poor connection to the burner resulting in the burner being replaced and the new burner not working or working intermittently.
Please take the time to rate this solution
Posted on Jan 29, 2009
Tips for a great answer:
Oct 19, 2015 | Kenmore Kitchen Ranges
Dec 03, 2012 | Kenmore 91112 / 91114 / 91117 Electric...
Apr 29, 2012 | Kitchen Ranges
Jan 14, 2018 | Magic Chef Ovens
Sep 16, 2010 | Kenmore 95002 / 95004 Electric Kitchen...
Apr 11, 2009 | Frigidaire Professional Series 24 in....
Jan 29, 2009 | Kenmore 95002 / 95004 Electric Kitchen...
Apr 13, 2019 | Kenmore Kitchen Ranges
218 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: