How can solve error code e030 remove

Toshiba e-Studio 356. Description: Power-ON jam: The paper is remaining on the paper transport path when power is turned ON. Remedy: 1 Open the cover of the unit/ area whose picture is blinking on the control panel. ... Yes Remove the paper.
https://printcopy.info/index.php?mod=erc&brand=Toshiba&model=e-Studio%20356&code=E030
https://www.manualslib.com/manual/1023591/Toshiba-E-Studio2330c.html?page=972

Look up "error code E030 + your make & model" online for an answer.

Code E030 Description Power-ON jam: The paper is remaining on the paper transport path when power is turned ON.

E030 indicates jam error on exit...U need to see where the paper stop and why...

Power-ON jam: The paper is remaining on the
paper transport path when power is turned ON.

You can try unplugging the unit for about 20 minutes then plug it back,some units have a rest button.Dig up the users manual and there it will show how to remove error messages.

http://printer1.blogspot.com/2008/11/canon-np6050-service-manual.html Above a service and repair manual, this will show you what to do.

"E030" Total copy counter problem.

• Total copy counter (open circuit)
• DC controller PCB (faulty)

E030 Does pertain to the total copy counter.If you have changed the dc controller & copy counter & still get the E030 error, you may have to enter the service mode to release the error. In service mode under *4* (function) advance to the error screen & press the star button. If you do not know how to get into service mode you can email me at [email protected] or call Bill @ 315-701-1279 Please put canon 6050 E030 in subject line in case my email dumps it into the junk folder.