Ricoh 2045e

Hi,
press the yellow clear key, press 1 07, then hold the "Stop" key for 10 second, LCD screen change, enter in to copier SP, under tab 5 scrool the page till you see delivery server.

Regards

You can change this particular setting by logging on to the machines web interface page. And clicking Login in the top left hand corner.
Username: Admin Password: (blank)
Then if you look through the left menus you will find a link called Configuration.
Web monitor shits on doing it through the interface.
Ta! Willi Williams Service Engineer.

The delivery server IP address is pushed to the machine from the scan router software. If it needs to be updated, you will have to remove and readd the I/O device within the scan router administration utility. If you do not use scan router you can set delivery option to off, and it will eliminate the error message.

You are using web image monitor right? (Type the IP address into the top portion of a web browser. and sighn in as an administrator Name is admin no password.) Also make sure that you are not using DHCP, as this is assighned by it. -Carl