How do I fix error code 8 on my astrostart RSS-5225?

If the starter turns but the vehicle won't start when using an AstroStart RSS-5225, it's likely a vehicle-specific issue. Check for any issues with the vehicle's ignition, fuel, or electrical system. Consult a professional mechanic for a thorough diagnosis and repair.

REMOTE START, CRAZY ADD ON.
WHY NOT ASK THEM FOR SUPPORT.
MY GUESS IS WRONG BATTERY.
WHAT MEANS RRS? A HUGE TYPO FOR RSS???????? WOW IF TRUE.

https://www.astrostart.com/Products/RemoteStartSecurity/4306/RSS-5225.aspx






i READ THE MANUAL THERE RSS5225
IT SAYS CLEAR AS DAY THIS.

:Your remote is powered by an internal rechargeable battery that can only be serviced by an authorized Directed dealeR"

READ THIS? PAGES ON CHARGING IT

https://www.directeddealers.com/manuals/OG/AstroStart/RSS-5225_OG-Eng-2.pdf

PAGE 7 CHARGING WITH USB

THE FOB IS 13 YEARS OLD RIGHT.
AND NO BATTERY LASTS FOR 13YEARS, AND MUST BE REPLACED
SO PULL IT OUT AND POST PART NUMBERS ON IT.

The only people that can fix these remote starters when they go wrong is Alarm Installers. The have the knowledge and the pro grade scan tool computer to diagnose the communication issue.

remote starters are always plagued with issues. Have it removed or take it back to the installer. A friend of mine burned out 2 starter motors!

I got this free Pdf manual from reliable-store for free and I don't think Ive visited a mechanic or fixya for help for more than 3-4 times out of the 20 times I f ixed the chipper in these 4 yearsmust try this bitman and reliable-store. Both are good

Wiring, schematic, electrical diagrams,
fuse diag, error codes etc are basic contents of these online books they sell here on this website www.reliable-store.com I have attached. Must check it out

Amazon com 5225 New Replacement Battery for Astrostart RSS 5225 Remotes...

We Are Here To Help !!

Donald Deane MCSE,ASE,CPO

The BCM and the key FOB have to be programmed to match by a dealer.

[PDF]MODEL RSS-5225 - DirectedDealers.com

www.directeddealers.com/manuals/OG/Astrostart/RSS-5225_OG-Eng.pdf

Immediately report any malfunction to the AstroStart dealer that performed the ... Always turn off the main switch when not using the remote starter for .... The startmodule will inform you of the status of door locks, the alarm and of the engine. .... If the trunk is opened for more than 5 minutes, the system switches to the.

How do you reprogram an AstroStart remote HST5224

www.answers.com > Wiki Answers > Categories > Cars & Vehicles

In order to reprogram an AstroStart HST5224 remote, you must putthe key in the ignition ... lamp) b, press and hold UNLOCK button, after 1 second key LED will flash once c, .... C. Turn the ignition to ON (Do NOT Start) then back to OFF. ... B.Immediately after letting go of the lock and unlock buttons, press the lock button by ..

You may need to reset the system.

SEQUENCE ACTIVATED BY THE PARKING BRAKE .
1. While engine is running (key in ignition switch), apply the brakes and hold the pedal down.
2. Move gearshift lever to neutral.
3. Apply the parking brake Once Twice
Note: The system can be set - at time of installation - to require that the parking brake be applied once or twice.
If set for two actuations, pause one second between the two.
4. Remove key from ignition (the system keeps the engine running).
5. Exit the vehicle.
6. Within 60 seconds, close all doors.
7. The system will stop the engine and blink the parking brakes once to confirm the sequence is valid (vehicle is
ready for a remote start command).
SEQUENCE ACTIVATED BY THE REMOTE CONTROL
1. While engine is running (key in ignition switch), apply the brakes and hold the pedal down.
2. Move gearshift lever to neutral.
3. Apply parking brake.
4. Send the start command (Model 801 & 2101 - Model 903 ).
5. Remove key from ignition (the system keeps the engine running).
6. Exit the vehicle.
7. Using the remote, send the STOP command. The system will stop the engine and parking lights will blink once
to confirm that the sequence is valid (vehicle is ready for a remote start command).
http://www.astrostart.com/Support/Guides.aspx