Question about EliteGroup K7SEM Motherboard
You can do a CMOS/BIOS reset which will clear all the configurations including any password(s).
To reset the CMOS/BIOS. you need to open the case of your desktop PC and locate the jumper (JP1) for this purpose on the motherboard. It is located near the AGP Port, below the AMR1 connector. You need to move the jumper from the 2 pins where it is currently located and move it to the opposite pair (center pin will be common of course). After a few seconds place back to original position.
On reboot, press "Del" key to enter CMOS/BIOS setup, select Standard/BIOS default, Save & Exit, reboot "Del" key again, set to your preferences.
Good luck and kind regards.
Posted on Nov 12, 2007
Worked like a charm! Thank you,
Posted on Jul 27, 2008
Tips for a great answer:
Oct 14, 2012 | EliteGroup K7SEM Motherboard
Windows Advanced Options Menu
Please select an option:
Safe Mode with Networking
Safe Mode with Command Prompt
Enable Boot Logging
Enable VGA mode
Last Known Good Configuration (your most recent settings that worked)
Directory Services Restore Mode (Windows domain controllers only)
Start Windows Normally
Return to OS Choices Menu
Use the up and down arrow keys to move the highlight to your choice
select safe mode with command prompt
Click start run type cmd press Enter
black screen should open DOS mode
this will vary depending on your operating system
type in net user username
For eg. If you want to change administrator password , type net user Administrator
it will prompt you to enter the new password
enter the new password and the password is changed
if this fails you will need to
Select safe mode with networking to download
you could download all of these or just one save them to a usb drive for later use if one fails to remove the password
A CMOS BIOS password recovery tool
Editors note: This tool should only be used by experienced computer users. Please see the enclosed read me if you would like to run it from Windows. Failure to follow instructions (from Windows) will cause your anti-virus to flag this as a virus.
http://majorgeeks.com/Dr._Freeware_System_Utilities_d6416.html Dr.Freeware System Utilities which includes data recovery software, data backup, password reset tools for Windows helps you to maintain your system. Dr.Freeware is freeware, you can download and use it for free.
hope this helps
Lazesoft Recover My Password Home Edition is a very easy to use Windows password recovery freeware
password cracker free
hope this helps
Sep 13, 2012 | EliteGroup K7SEM Motherboard
click start control panel Open User Accounts in Control Panel. On the Users tab, click the name of the user whose password you want to change, and then click Reset Password. In New password and Confirm new password, type the new password, and then click OK. Notes You can change passwords only for local computer accounts, such as guest, administrator, or accounts you create for your computer. You cannot change your network logon password in User Accounts. To change your own password, press CTRL ALT DELETE and then click Change Password
When you boot up to the log in screen type in administrator as user to log in if you cant log in during the boot up process you will see on the screen for a short amount of time press a certain key to enter set up Press and hold that key during the boot up process to enter BIOS scroll down to set user password or supervisor password you can change or remove your password from there also click start control panel user accounts on the users tab,click the name of the computer administrator you can change the password there
If you are talking about problem with your password
You need to prepare:
1:A blank CD/DVD or USB flash drive
2.A computer which can link to internet
3.A program called Windows Password Recovery 6.0
Get started with this 3 simple steps:
Step 1 - Download windows password recovery utility and install it.
Step 2 -Burn your Windows Password Reset CD:
To burn your CD, you'll need a blank CD-R and the .ISO file of Windows Password Reset.
Step 3 - Put in your newly created CD and remove your Windows password.
hope this helps
UBCD4Win is a bootable CD which contains software that allows you to repair, restore, or diagnose almost any computer problem also has a bios reset tool which can remove your password and bios password
you will have to burn it to a disk as an ISO then you will have to boot from the disc During the boot process you will see on the screen to press a certain key to enter setup Press and hold that key during the boot up process to enter BIOS the scroll down to advanced bios features press enter change your first boot device to cd press escape then press f10 to save to cmos to restart (note after you have removed your password you will have change first boot back to your hard drive)
there are a number of things that you can do to remove your password another option would be to remove your cmos battery Hope this helps
Apr 10, 2011 | Motherboards
Jan 31, 2010 | Motherboards
Mar 15, 2009 | Acer Motherboards
Feb 20, 2009 | EliteGroup K7SEM Motherboard
Jan 14, 2009 | E-Machines EMA IMPERIAL GV (845GV) TG3...
Jul 25, 2008 | EliteGroup Motherboards
Jan 23, 2008 | EliteGroup K7SEM Motherboard
Nov 14, 2007 | Motherboards
159 people viewed this question
Usually answered in minutes!