I bought a Honeywell HCM-6009 in March 2014. Now less than 1 year later I notice beads of water leaving from a seam between the clear plastic and the white plastic on the long edge of one of my humidifier's water tanks. The seam may have been faulty from the beginning but I just noticed that the leak is the source of water drops i have noticed before. Is the water tank under the one year warranty? How do you recommend I deal with this problem? On my carton it says P/N 32GB6009PBO, Rev 2.6, 6.12.12
SOURCE: tank is broken on Honeywell HCM-560 humidifier.
you type in on the internet. www.appliancefactory.com
in the search bar type in your model number. it might take a minute to load but you will have 3 pictures that come up. click on any of them and scroll down alittle until you see water tanks. you can order them there.. or if youdon't want to go that route you can always try local hardware stores to see if they have it as well.
SOURCE: Our HCM-640bw Honeywell humidifier will leak water
Found a hairline crack in the water canister. Had to locate by filling the canister and waiting for a couple of minutes for water droplets to form outside the canister. This ever so slight crack allowed air to enter the chamber and made changes to water dispensing rate which overfilled the resevoir over time ( hours). The cracks were not visible under 10X magnification without the water droplets.
182 views
Usually answered in minutes!
×