Hello i have an pm8m-v motherboard brand new when i push start buttom it fires for half a sec then stops and flashes on and off with the power led u cant reset it with the reset buttom,if u unplug then wait 5 sec to start up again does exactly the same.have removed all hardware from machice and started it with just a external fan connected does the same .can u please help me thankyou
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
you don't need to find out manual for jumper setting any where if you see the mother board very closely near which Jumper want to setup you can see the printed jumper setting on mother board only,
firstly i want to tell you that every motherbord bios has a unique program to control the devices.
it this bios is fit on another board casing then you try to firstly run the mother board with old bios. then copy the bios code by any flashing tool and then remove this bios and fit the dead mother board bios in the casing then flash it and then update it which file you copy the old one.
then your motherboard perhaps go on with the dead motherboard bios.