Took bottom off and cleaned well. installed new bag
Hi!, It's Jim with Crucial Vacuum,
Often times when your vacuums bag light remains on even after installing a new bag there is an air flow problem within your vacuum, or clog. This would explain why there is debris shooting out of your vacuums top vent.
Remove your vacuums bag and check to see if there are any clogs where the bag would attach normally. Clear out any noticeable debris.
While you're looking for clogs, check your vacuums hose, brush roll and filters. Stretch your vacuums hose out completely to unearth any debris. Manually spin your brush roll to help release any clogs, and wash your filters, but be sure to allow them to fully dry before re-installing them.
This should undo any clogs in your vacuum and cause your bag light to turn off.
You can purchase replacement parts for your Hoover vacuum direct from Crucial Vacuum with free shipping and an exclusive 10% coupon for Fixya.com readers, use code: FIXYA10
http://www.crucialvacuum.com/catalogsearch/result/?q=Hoover&order=relevance&dir=desc&limit=all
I hope this was helpful. If you would like further assistance, please feel free to give us a call at 877.750.9239. We have helpful and friendly customer care representatives on the line ready to assist you.
Jim Thompson
Crucial Vacuum Customer Care
http://www.CrucialVacuum.com
142 views
Usually answered in minutes!
×