My red lamp light came on and my screen went black.After leaving the TV off for several hours and turning it back on the red light is off and the green light comes on and I only have sound for about a min.Then the red light comes back on and I have nothing.Do I need a new lamp or is this somthing else?
Brought 73in mits used work fine on 12/20/07 on 1/1/ 08 it just went off no ptc but sound brought lamp for 226 replaced it and still no pic call tv tech out to the house he charge 70 just to tell me my engine light is bad. call mits they said i have no warranty becaue i brought it used but they had extened the replacement of the engine for 2 years because of bad part. i havve to pay for the part myself it cost 1700.00 and the labor is about 299, im piss mitsu sould replace they faulty part/ if anybody can help me out pls respond never buy mits again
They must all be programmed to do this at the same time - right before Christmas - isn't that special!. I have been checking into this myself and it appears that a new lamp is needed. If your set isunder warranty, the book says to call 800-553-7278. If it is out of warrany, they say you can visit www.mitsuparts.com or call the same number. The replacement lamp cartridge part is 915P043010. Their website lists the part as $239. I've been searching for hours for an alternate place to purchase, but haven't found one yet.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
started with different color pixels not coming in till the tv warmed up. Hadf to turn TV on and off several times before clear screen. Last night TV went black with a giant red x in the middle of screen. Now just 99% black.
Sounds like you need to replace the lamp. An original Mitsubishi lamp will last 7 to 10000 hours. It's a no brainer to replace. Buy the lamp from Mitsubishi or a dealer. Do not buy one over the internet. Those are awful...
OK. I have this same issue. I replaced my bulb a month or so ago. TV worked fine. Then one morning I turned it on and it was on for a good while, till it went to a black screen w/ sound only. Lights were going through the reboot process as designed for 8 attempts before it went to the solid red light. From the red light, if I unplug and plug back in, the tv will come on for a given amount of time, which varies, and then cut to the black screen. A repairman told me that it sounds like the digital board is bad. He wanted $150 for the board and $100 labor. I cannot find anywhere where the board would be located or where I can purchase a replacement.
Hi, Replace its lamp as existing lamp has been reached at end of its working hours life and need to replace to solve this issue. Please note lamp is not not broken or dead yet so you do not see lamp light on tv front. Lamp replacement procedure is easy and written in user manual. Please buy Sony original lamp for god picture in tv. Thanks.
When was the projection lamp last change?If the tv,projection lamp inside the tv at last change was 1/ 1/2 or 2 years ago,and the tv is on,an in use at lest 4 or 5 hours day.The projection lamp life,it over should be change the projection lamp.Now tv turn on LED light "LAMP" indication light up or flashes?Yes,the projection is dead,hear alot of clicking too?The Ballast board it also dead,should be change too.The Ballast board,this board job,it help to ignite the projection lamp.
You definitely have a bad lamp. Sony rates the lamp life at between 4000 and 8000 hours. There are 3 things that effect the lamp life, listed in order of importance: 1) number of times the lamp is turned on and off. Every time the lamp is first fired, it takes life off the lamp. Customers I see that turn the TV on in the morning, leave it on all day and then turn it off on the evening can get up to 12000 lamp hours 2) ventilation. Be sure you have at least 6 inches of open space all the way around the set and that the vents are clear of dust and debris. 3) power. If the power is interrupted when the set is on, there cannot be a proper cool down cycle. The fans will run after you turn the set off to properly cool it down, if the power is lost this cannot happen. If your power is unreliable, buy a small UPS to let the set finish a cool down cycle
Occasionally a lamp will faill before the average lamp time due to being defective. from your purchase date it sounds like you got about average lamp time. Be sure to purchase AN ORIGINAL SONY LAMP as a replacement, becuase the aftermarket lamps are bad news, Be sure to rate this solution. Thanks!