Question about Samsung Televison & Video

1 Answer

How do I remove the base stand to wall mount a Samsung model T24C55OND flat screen TV

Have removed the base plate and vertical post, but cannot figure how to remove the hinge receptical in the bottom of the back of the TV. This item must come away in order to wall mount this unit.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 166 Answers

The wall mount attaches to the top 1/3 portion of the TVs rear panel. The bottom of the back of the TV should not interfere with your wall mount if it's the correct size. Full instructions are listed starting at page 39 of the manual.
http://downloadcenter.samsung.com/content/UM/201404/20140426112621559/[X13_NA]BN46-00319C-04ENG-0312.pdf

Posted on Jan 12, 2015

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: how to remove the stand from samsung LCD TV

Place the tv on its screen flat on a soft surface,
you need to remove all the screws, not just the stand one marked.
Lift the back panel and then you will be able to slide down the stand, when you have removed the back cover you will also see where how your wall mount will fit to the chassis.
Place all the screws back on the back lid.

Posted on Feb 09, 2008

  • 1 Answer

SOURCE: Remove base of Insignia ns-ltdvd26-09

to remove base from insignia tv
1)remove plastic cover from bottom rear of tv
2)remove 8 philips head screws on rear of tv above base
3)pick up tv and base will come off

once you remove it you realize how easy it is

Posted on Aug 26, 2008

SOURCE: Removing the stand from a flat panel TV

None of these TVs have any problem removing the stand.

Stands for 32'' and larger TVs plug into the TV's body and are attached by 4 to 8 bolts that go through the cover, then through the plugged-in part of the stand and attach to the internal frame.

In most cases the bolts are 4 - one for each ray of the fork that goes into the TV.

Since bolts for the frame are metal bolts and bolts for the plastic back cover are usually wood-type screws (sharp on the top, wider thread) you can visually tell the one for the stand from the rest.

Look right above the stand for four, six or eight symettrically placed heads that are different from the ones you see on the corners.

Once you unscrew those the stand should feel more flexible and you can simply pull it back.

In order to do all that you have to have the TV laying on its face or back.

Watch out if it's heavy - you may need to support it towards the end of the operation. It's unlikely for it to get damaged if it falls down, but you still don't want to try your chances.

Giving it a little lift also helps unscrew the last bolts...otherwise all the force of the TV is pressing against it...and that makes it harder to unscrew.

Posted on Nov 07, 2009

  • 1 Answer

SOURCE: Wall mounting Panasonic Viera 32" tv

There's a little more elaboration required on the above post...You need to remember that the base has two long pins that go up into the TV. These pins are held in by two screws each. The screws are on each side of the TV (two vertical inline screws, inside a small inset section). Remove all four screws and the TV will come up off the base. Pull it straight and gently, but firmly, to unseat it from the pins.

Posted on Dec 28, 2009

SOURCE: how do I remove the stand to mount the TV on the

the TV will mount to the wall via the VESA screw mounts on the back of the LCD. If it is a smaller, monitor sized LCD then the screw pattern will be either 75x75mm or 100x100mm. On larger TVs is it usually 100x200mm. Sometimes the base is screwed into this mount and othertimes to the bottom. Simply unscrew it from the screen. Be sure that the wall mounting kit can handle your LCDs VESA screw pattern, screen size and screen weight.

Posted on Feb 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remove stand from w4207 TV


Put tv on bed face down and look at the stand and locate and remove any and all screws holding stand to the flat screen set. Then after mounting the wall plate per instructions mount the tv to wall mounting.

Sep 08, 2015 | Westinghouse W4207 42 in. HD-Ready LCD TV

1 Answer

I Have a Panasonic Veria TH37PX600B flat screen TV with no manual,what I would like to do is take it off it's stand to wall mount it.But how? I've tried removing various screws and plates but it...


Unscrew the base screws attaching the base to the TV set, once the four screws have been removed, the TV can be seperated from the base as shown below. The circles are where the screws were on mine before I removed the base.
10_4_2011_3_18_23_pm.jpg

Jun 12, 2011 | Televison & Video

2 Answers

I have a 42 in. Vizio Galleria and need to remove table top stand so I can wall mount. How do I remove base stand?


1. Unplug all of the cables and cords from your GV42L FHDTV10A.
2. Place the GV42L FHDTV10A face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the TV.
3. Pull the stand cover off by squeezing the sides to release the retaining plastic tabs.
(This is probably the trickiest part to find this, just feel around and don't be too rough with the plastic)
4. Remove the four (4) screws (screw's specs: M4, 0.7 Pitch, 15mm long) so that the stand base can be removed.
5. Gently remove the stand base
6. Now, the GV42L FHDTV10A can fit securely to a mount (sold separately) by utilizing the mounting holes in the center of the back panel of the TV. Please make sure to read the instructions of your specific mount to properly hang the GV42L FHDTV10A

Mar 13, 2011 | Vizio Gallevia GV42LF 42 in. LCD...

1 Answer

How do i remove the stand/base off a panasonic viera TX37LZD70 37" flat screen tv so I can wall mount it?


Place the TV on a flat bed preferably your mattress and look for the base mountings. The lock and base mount can be slid off and you can use a good wall mount that will support the weight to be fitted.
Please find the link below for help:

Wall mounting flat TV

Jan 07, 2011 | Panasonic Televison & Video

1 Answer

I bought a new 19 in samsung and have now wall mounted it but can't see how to removed the stand for the base plate!!


There should be screws that's holding the stand for the base plate. Find the screw at the back and use a philips scredriver to unscrew it. Try lying the front of the tv flat (make sure that the surface is padded, so as not to damage the tv) when you unscrew it, or even lie it upside down just to take out the screws. You will find it more difficult to take out the screws if you do it with the tv standing up.

Nov 19, 2009 | Computers & Internet

1 Answer

Picture remains for few seconds then screen goes blank, sound remains on


I had this problem on my 42" Philips LCD. Just got it yesterday and worked fine on the tv stand. As soon as I mounted the TV to the wall via wall mount system, I had the exact same issue you did. Figured it out today.

The wall mount was putting pressure against the center of the back of the tv (tv set had a slightly rounded back plate, and the mount was a flat plate). As soon as I put spacers (part of the wall mount hardware set) between the wall mount braket and the tv so there was no contact except at the mounting holes, the tv worked fine.

My theory is the pressure pushed the tv back plate against some board components which caused them to overheat (no air flow); or put pressure on internal connectors. I dont know.

Hope this helps, may not apply to your situation.

Sep 01, 2009 | Samsung SM932MW 19 in. LCD TV

1 Answer

LN37A550 FLAT SCREEN TV


To remove the base stand, place the TV face down on a smooth surface. Place a cloth underneath it to protect the screen. Remove the 4 phillip screws from the stand. The stand can now be removed. The set can with a cover plate you can use to cover the opening.
See page #86 in the User Manual.

Mar 15, 2009 | Samsung LN37A530 37 in. LCD HDTV

2 Answers

Removal of flat screen pedestal so I can wall mount tv


Had the same issue. I turn the unit upside down and while holding panel down just pulled staight up on the base. The circular base popped off without any damage. I just needed to remove for shipping.so I didn't have to remove the cylindrical post. Once the base is removed you can see a screw that probably attaches that cylinder to the unit. Carefully removing it should work. Good Luck....j

Nov 23, 2008 | Televison & Video

1 Answer

How to remove the stand from samsung LCD TV


Place the tv on its screen flat on a soft surface,
you need to remove all the screws, not just the stand one marked.
Lift the back panel and then you will be able to slide down the stand, when you have removed the back cover you will also see where how your wall mount will fit to the chassis.
Place all the screws back on the back lid.

Feb 07, 2008 | Samsung LE40R74BDX 40 in. LCD Television

2 Answers

Wall mounting Panasonic Viera 32" tv


There's a little more elaboration required on the above post...You need to remember that the base has two long pins that go up into the TV. These pins are held in by two screws each. The screws are on each side of the TV (two vertical inline screws, inside a small inset section). Remove all four screws and the TV will come up off the base. Pull it straight and gently, but firmly, to unseat it from the pins.

Nov 24, 2007 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

329 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76054 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Demonic-2011
Demonic-2011

Level 3 Expert

512 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...