Question about ViewSonic VPW425 42 in. Plasma HDTV

1 Answer

TV power cycles but does not come on

The unit will power up but a relay tries to turn on and then cycles off again. no menu and no sound.

Posted by on

  • 2 more comments 
  • n ick Nov 13, 2007

    i guess i need the schematic if anyone has it i will pay for it. let me know. the power supply circuit is a samsung board. the part numbers are not found in digikey or allied. this is why the schematic would be helpful.

  • lundcj Nov 24, 2007

    Tv powers on but no picture sound or menu

  • Anonymous Jan 09, 2008

    i have the same problem what the fuck...fuck akai.

  • mittalv Feb 03, 2008

    same problem here. anybody have a solution



    my viewsonic VPW450 is 3 yrs old and after 5 mins will go blank

×

Ad

1 Answer

This website has many service manuals that you can download for a fee
www.ServiceManuals.Net
Good luck.

Posted on Nov 18, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I exit the service menu on this TV?


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.
NB: Please read and understand well, the instructions to enter the service mode, before you begin. Be very careful. Note how to "EXIT" the service mode; after entering and adjusting data. This is very important.

Jul 14, 2015 | Televison & Video

1 Answer

York furnace .induced draft motor runs when t stat is off


Sounds like a bad thermostat or stuck motor control relay. Turn off the breaker at the unit or in the electrical panel to kill the motor and see if cutting power, if relay is bad, cycles off and stays, but you should leave power off and call for service right away.

Jun 18, 2015 | York Tools & Hardware - Others

1 Answer

Bosch smv4403gb 20


if the is an electronic unit it sounds like a burnt relay on the control board if the is the case the control will need to be replaced

May 24, 2014 | Dishwashers

1 Answer

I have a Kitchenaid YKHMS147HW microwave that started turning on by itself, and will not shut off unless I unplug the unit. If I put food in to cook, the food starts cooking as soon as I plug the unit in,...


Sounds like stuck relay contacts. Magnetrons need a high voltage source which is controlled by a micro to relay and then from relay to voltage source. Even the turntable works via a relay.

Oct 14, 2013 | Microwave Ovens

1 Answer

WHEN I TRY TURNIN IT ON IT JUST STAYS ON THE SANDISK 256MB WELCOME SCREEN HOW CAN I UN FREEZE IT?


Reset the device. 1. Press and hold the Power/Menu button for approximately 20 seconds. 2. Release the Power/Menu button. 3. Press the Power/Menu button again to turn on the player.
Power cycle the device.
The power cycle discharges excess/residual power from the player; with the use of a new battery, it should be able to power on the MP3 player properly.
STEP 1 - Remove the battery STEP 2 - Power cycle the player 1. Connect the player to the PC. 2. Leave the device connected for about 2 minutes.
STEP 3 - Turn on the device 1. Unplug the player from the PC. 2. Insert a fresh AAA battery into the player. 3. Turn on the player.

Dec 29, 2010 | SanDisk SDMX1 MP3 Player

1 Answer

Will not turn on. sounds like a relay is cycling in back of unit where ac cord enters


look at the power pcb in the unit and look for some capacitors that are puffed on top and replace them. the unit will work

Nov 29, 2009 | Samsung Televison & Video

Not finding what you are looking for?
ViewSonic VPW425 42 in. Plasma HDTV Logo

Related Topics:

243 people viewed this question

Ask a Question

Usually answered in minutes!

Top ViewSonic Televison & Video Experts

Cindy Wells

Level 3 Expert

5337 Answers

The Knight
The Knight

Level 3 Expert

75157 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a ViewSonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...