Question about Standard (CRT) Televisions

2 Answers

Black screen no sound

Picture does not come on when tv is turned on.

tv sounds like it always does when it is turned on but has black screen and no sound

I have a 32 inch Phillips Magnavox CRT Television. I was watching it one night when it just suddenly turned off or went to a black screen. The power button will sometimes come on when pushing it, sometimes I have to unplug it tnen plug it back in to get it to power up, but still no picture, no sound nothing but the power light flashes green 5 times, then repeats. The tv makes a clicking sound like it is trying to come on. I have left it unplugged for days and tried to turn it on again...nothing, I have also checked all the connections, still nothing. I am wondering if it is going to cost alot to repair? Is it worth it? The tv is not very old.PLEASE HELP!!!!. I really like this tv

Posted by on

2 Answers

Re: black screen no sound

Look at this
Phillips/Maganavox TS3258 Dead, HOT shorted R&R Flyback, HOT
Transistor,#3610- 22k, #6328 SMD diode, #7325 SMD Transistor and Check
#3611/3608 190 ohm resistor by #3610
TELEVISION MAGNAVOX TS3258 Flyback Bad Replace fly -
TELEVISION MAGNAVOX TS3258C101 DEAD Shorted flyback, will also damage
IC7150, R3610, R3331, D6328, and Q7325.

Posted on Nov 13, 2007

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 56 Answers
Re: black screen no sound

What is the model or chassel number it be a few thing H.O.T Resistor Caps etc..most likely horizontal output transistor.

Posted on Nov 12, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Tik tik sund from philips tv

when i turn on my philips 20 in flat tv i have no picture, just black screen with a tik tik sound

May 11, 2010 | Philips Magnavox 27MS343S 27" TV

1 Answer

When initially turned on TV will alternat between picutre & black

When the tv goes to a black screen does the sound remain on? Also,if you listen carefully can you hear any arcing noises in the back of the tv?

Aug 03, 2009 | Sony FD Trinitron WEGA KV-34HS420 34" TV

1 Answer


It seem that the OSD still working but the screen is black. try to resolder it first because many old tv has cold solder problems.

May 31, 2009 | Apex Digital AT2008 20" TV

1 Answer

Sony kv35s66: No picture, just sound and red blinking

This should be a quick fix. Try resoldering the vertical IC. This is a small flat IC attached to a heat sink with about 11 pins. It should be marked LA7837 or something similar. That should resolve the problem.

Keep us posted.

Sep 08, 2008 | Standard (CRT) Televisions

1 Answer

TV has audio sound and no picture

major repair; requires 16 pin ic

Apr 19, 2008 | Standard (CRT) Televisions

2 Answers

Tv screen goes black

No, if the picture of your tv screen is clear when when you watching. the troble of your tv is looseboard, and you replace your CRT socket too.

Apr 16, 2008 | Sony KV-35V35 TV

1 Answer

Sony kv35s66: No picture, just sound and red blinking

The most common problem (I have fixed lots) is the Vertical amplifier has developed a loose connection. It probably just needs resoldering. As things expand it makes and looses connection you picture goes in and out. The vertical chip is a large black chip that gets hot, over time it degrades the solder until a connection is damaged. Most newer sets have a protection circuit that senses the lack of height, and shuts down the picture tube to save it. When the picture dropped to a line on older TVs and left that way too long it would burn a line into the face of the picture tube. You then had to have the picture tube replaced along with the vertical amp. it's kinda like a screensaver for your TV.

Nov 21, 2007 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

Sony kv 32s42 32 tv

turn up your master screen control on flyback transformer. if when sceen gos black ,the timer light will be blinking. this means your picture tube is week. by turning up the screen control you may give it more time.

Aug 05, 2007 | Sony KV-32S42 32" TV

1 Answer

Picture getting small blacking out

Yes you sound like pincushin is failing on you. Soon it will knock out horiz. output caps and Diodes. Needs repair soon.

Apr 25, 2007 | RCA F35673MB 35" TV

Not finding what you are looking for?
Standard (CRT) Televisions Logo

Related Topics:

408 people viewed this question

Ask a Question

Usually answered in minutes!

Top Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66623 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides