My Note 4 show up with an error when I tried to update it. It is now freeze and refuse to turn on completely or to reboot. When can I do to fix this problem

https://answers.microsoft.com/en-us/msoffice/forum/msoffice_install-mso_windows8-mso_2013_release/error-code-30089-13/93a41c3a-1edc-4f6b-a80b-b6a23b51bcb9


Error Code 30089 13

hard reset is what it needs. So find the right tools to do the job.

The 0xc000001d error may be caused by windows system files damage.
There are two (2) ways to fix 0xc000001d Error:
Advanced Computer User Solution (manual update):
1) Start your computer and log on as an administrator.
2) Click the Start button then select All Programs, Accessories, System Tools, and then click System Restore.
3) In the new window, select "Restore my computer to an earlier time" option and then click Next.
4) Select the most recent system restore point from the "On this list, click a restore point" list, and then click Next.
5) Click Next on the confirmation window.
6) Restarts the computer when the restoration is finished.
Novice Computer User Solution (completely automated):
1) Download (0xc000001d) repair utility.
2) Install program and click Scan button.
3) Click the Fix Errors button when scan is completed.
4) Restart your computer.
This tool will scan and diagnose, then repairs, your PC with patent pending technology that fix your windows operating system registry structure.
basic features: (repairs system freezing and rebooting issues , start-up customization , browser helper object management , program removal management , live updates , windows structure repair.)

Instructions

1. • 1 Reboot or turn on the computer. Press <F11> to enter the service partition. Note that this message will stay on the screen for only two seconds. If you miss the screen, reboot and try again.
     
   • 2 Select "Full recovery" in the main menu of the service partition and follow the onscreen instructions to begin a recovery of your system. Allow the recovery procedure to finish. Reboot the computer and allow Windows setup to complete reinstallation of your software and drivers. Allow the installation to finish and reboot the computer again to finish the recovery.
     
   • 3 Reinstall any programs and run Windows Update to ensure you have the latest security updates and protection for your computer. Copy any backed up data back to your hard drive.
     
     The link below describes the above procedure in detail.

How to Restore Lenovo ThinkPad eHow

If you can, I would download MalwareBytes (It's free) update it first, then run it. If it finds problems (usually indicated in red) remove the problems. Reboot and then try your Webroot again. Note that any Anti-Virus program will not work well unless it is regularly updated. this is because new viruses / malware come out with great frequency.

HI Steel,

For this you dont need to buy another computer.
Follow the steps.
1. Try safe boot, F8 key @ BIOS screen just after you turn on the system. Choose safe boot from menu.
2. In safeboot.
Go to control pannel and choose option Show windows updates. else they may also be visible by default.
3. Minimise the window.
4. after you find the system is turned up completely.
close the opened window without touching anything.
5. give the system a complete shutdown.
6. reboot.
7. System may say " System has recovered after a serious error"


Still if it does not works.

1.insert the OS disk.
2. choose to follow wizard seriously reading each step.
3. It will ask you ro repair your OS.
Choose this option.
4. let the system recover (The process is slow; may take 30 mins or more)




Rate this solution, Write a comment to keep in touch, let me know how it worked the first way or the other.

WisBee

In Figure 2-2 you can also see that the Windows service SPCMDCON.SYS has failed. From the BSOD, you should be able to gather the following information:
•The stop error number, which uniquely identifies the error
•The stop error parameters, which provide additional information relating to the specific stop error number
•Driver information is available if the source of the problem relates to drivers
Armed with this information, you are able to search online to establish the problem and hopefully a resolution.
In addition to the information available on the blue screen, if the system is able to be rebooted after the BSOD, either normally or using Safe Mode, it is useful to take a look in the System Event Log and view the error message. For example, a faulty driver during boot up usually has the stop error code STOP: 0x00000050 and an Error EventID of 1003.
If your system refuses to reboot successfully, or is trapped within a perpetual BSOD that restarts over and over again, you should take the following steps. Press F8 after the BIOS screen appears. From Advanced Boot Options, select Disable automatic restart on system failure, as shown in Figure 2-3. This allows you to read and make note of the information contained on the BSOD. You can then allow Windows to attempt a reboot. If the perpetual loop reoccurs, select another option, such as Safe Mode, from the Advanced Boot Options menu.
If your system refuses to reboot successfully, or is trapped within a perpetual BSOD that restarts over and over again, you should take the following steps. Press F8 after the BIOS screen appears. From Advanced Boot Options, select Disable automatic restart on system failure, as shown in Figure 2-3. This allows you to read and make note of the information contained on the BSOD. You can then allow Windows to attempt a reboot. If the perpetual loop reoccurs, select another option, such as Safe Mode, from the Advanced Boot Options menu.



To disable the system from automatically rebooting, take the following steps:
1.Click Start, right-click Computer, and select Properties.
2.Click Advanced System Settings.
3.In the System Properties dialog box, click the Advanced tab. Under Startup and Recovery, click Settings.
4.In the System Failure box, clear the Automatically Restart check box.
These steps can also be configured if the system is booted in Safe Mode. There are over 300 unique stop codes, and most are quite rare. The full list
can be found on MSDN within the Bug Checks (Blue Screens) reference at
https://msdn.microsoft.com/en-us/library/windows/hardware/hh994433(v=vs.85).aspx.

here is a link from adobe's website, this will help you completely remove the product.


http://kb.adobe.com/selfservice/viewContent.do?externalId=kb400654&sliceId=2

#1 a new repormat pc without any special force all ready install

#2 install Special force

#3 patch ...

Note: dont log in your user name


#4 install deepfreeze

install deep freeze
reboot

dont 4got to put password

if you 4 got live it blaNK THEN CLICK OK


then reboot


play your SF ready to GO!!

take note if gameguard currupt dont worry just restart

( i have trouble in SF i tried to uns install it and install it again but nothing happen gamegaurd currupted i try also copying the gameguard Negative it not work!!!.......It means you need to reformat your PC hahaha!!! install SF patch dont log in game install deep freeze ..............You can play SF in freezemode)


http://123nonstop.com/software/free-...key-patch.html


its cracked

http://rs177.rapidshare.com/files/19..._-_Majax31.rar

latest version 6.30


best for computer shop


any download during freeze mode will gone after reboot



all back to normal


better than any antivirus that **** delete your game launcher file

take note BOOT thawed if you want to install anything or updating something..



to open deepfreeze


ctrl+alt+shift+F6