Question about Antec Computers & Internet

1 Answer

Hi, in Antec 300watt power supply there is 3 cables or input or current 220volt. The cables are Black, Green and white. Which one is earth, which on is live(positive) and which one is negative?

Power supplier ANTEC ARIA 300 Watt output Model AR300 with PFC for desktop computers. Hi, in Antec 300watt power supply there is 3 cables or input or current 220volt. The cables are Black, Green and white. Which one is earth, which on is live(positive) and which one is negative?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 63 Answers

For 120 volt operation use
black for the hot, White for the natural, Green for earth ground.
For 240 volt operation use;

Black and White for the 240 volt and Green for earth ground.
Black is generally designated as the "Hot" or "positive" .
You must make sure the switch on the power supply is set for the voltage you are using. ie: 120/240

Posted on Dec 25, 2014

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 213 Answers

SOURCE: i am trying to hook

The green is ground. There is no "positive" and "negative" because the current in the outlet is alternating (AC). They are called "Live" and "Neutral". The Neutral i safe to touch, the Live is deadly. There is no difference how to connect them - in both ways the power supply will work.

Posted on Aug 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need wire color diagram


Black = AC hot
Red = switched AC hot
Yellow = AC hot from a another source - another control panel as an example.
White = neutral
red w/white tracer = switched neutral
Green or green w/ yellow tracer = ground/earth ground
blue = DC voltage, ie, 12vdc, 24vdc
white w/blue tracer = dc common
Brown = AC 3 pahse - phase A
Orange = AC 3 pahse - phase B
Yellow = AC 3 Phase - phase C
shileds: think of current loops
2 cond
clear or red = +
black = -(neg)
3 cond
red = power (24vdc typically for transducers)
clear = + (signal output)
black = - (signal common)
Hope this helps, oh, and any panel I have design and wired this way is easily understaood by 99% of all service and electrical people I have worked with.

Apr 15, 2015 | Cars & Trucks

1 Answer

What is colors are 120watts power supply cable


I don't understand the question!

Maybe Black, White, Green. I do not quite understand what you need to know.

Apr 24, 2014 | Antec Computers & Internet

1 Answer

How to wire trailer plug


hope this helps


6 pin socket

w1s.jpg

w1p.jpg

6 pin plug


7 pin socket

w2s.jpg

w2p.jpg

7 pin plug


5 pin socket

w3s.jpg

w3p.jpg

5 pin plug



7 pin socket

w4s.jpg

w4p.jpg

7 pin plug



7 pin socket

w5s.jpg

w5p.jpg

7 pin plug



7 pin socket

w6.jpg

7 pin plug





12 pin socket

w7.jpg

12 pin plug



small 6 pin round plug & socket

1 tail, clearance - brown

2 left hand turn - yellow

3 right hand turn - green

4 stop - red

5 electric brakes - blue

6 earth - white



small 7 pin round plug & socket

1 left hand turn - yellow

2 reverse - black

3 earth - white

4 right hand turn - green

5 electric brakes - blue

6 stop - red

7 tail, clearance, side markers - brown

roundskt.jpg round socket

large 5 pin round plug & socket

2 left hand turn - yellow

3 earth - white

5 right hand turn - green

6 stop - red

7 tail, clearance, side markers - brown



large 7 pin round plug & socket

1 left hand turn - yellow

2 reverse - black

3 earth - white

4 right hand turn - green

5 electric brakes - blue

6 stop - red

7 tail, clearance, side markers - brown



7 pin round heavy duty plug & socket

1 earth - white

2 left hand rear , clearance and marker - black

3 left hand turn - yellow

4 stop - red

5 right hand turn - green

6 right hand rear , clearance and marker - brown

7 reverse/auxilary - blue



7 pin flat plug & socket

1 left hand turn - yellow

2 reverse - black

3 earth - white

4 right hand turn - green

5 electric brakes - blue

6 stop - red

7 tail, clearance, side markers - brown


7_flatsocket.jpg flat socket

12 pin flat plug & socket

1 left hand turn - yellow

2 reverse - black

3 earth - white

4 right hand turn - green

5 electric brakes - blue

6 stop - red

7 tail, clearance, side markers - brown

8 battery supply - orange

9 auxiliaries - pink

10 earth - white

11 rear fog lamp - grey

12 auxiliaries - violet


Feb 02, 2013 | 2004 Toyota RAV4

1 Answer

How to install maystar s20/50


Maystar s20-50 connections.
Red + to permanent supply via 15A fuse
Black - vehicle body earth wire
Pink - negative trigger input, connect to additional earthing (pin) switches for bonnet boot etc.
Violet - for connection to negative switched courtesy light door switchs
Blue - ACC wire connect to an ignition switch positive supply
Yellow- connect one yellow wire to the left indicator and the other to the right inicator. Ensure that you connect to the switch output to the bulbs, not the supply to the switch.
White - Current sense loop- cut for current sense leave intact for non current sense.
Green - Antenna wire must not be cut or terminated.
Quick connect, for connection to additional Maystar control modules and sensor systems, follow the instructions supplied with the additional sensor.

Jan 16, 2013 | Cars & Trucks

1 Answer

Need to know how to hook up to 220 power supply what wires go where we got a red wire,black,white, and green which is ground can u help?


L1
L2
L3
Neutral
Earth
North America
Black
Red
Blue
White
Green
There is no blue cable in a 220V, so you have only; white, black, red and ground always green colored wire.

Looking your plug frontal side.
Green Ground on top (semi-circle)
black on left
red on right
white on bottom (neutral).

Jan 10, 2011 | Miller Bobcat 3 Phase Welder Generator...

1 Answer

I am trying to hook up an antec ar300 power supply to the outlet that lets it be plugged into the wall. there are three wires ... green white and black... i can not figure out which one is positive which...


The green is ground. There is no "positive" and "negative" because the current in the outlet is alternating (AC). They are called "Live" and "Neutral". The Neutral i safe to touch, the Live is deadly. There is no difference how to connect them - in both ways the power supply will work.

Aug 07, 2010 | Antec AR300 300-Watt Power Supply

1 Answer

MY DISH washer electric supply wires are cutdown and water pipe of dishwasher cutoff and i want its diagram input which is help full to connect the circut


Hi .. the electrical input to the dishwasher should be a 3 wire cable, black, white, green/bare. The connection is generally into a small metal box just behind the kick plate on the right side of the front of the washer. The cable gets run thru a cable connector to keep the presure off the connection. The connection is black to black, white to white, green/bare to a ground screw in the connection box.

Jun 21, 2010 | Smeg 24 in. DWF614SS Stainless Steel...

1 Answer

My computer just died the morning. I removed the


red- +5v
yellow- +12v
orange - +3.3
black- 0v
blue- -12v
white - -5v
green - ps-on(+5v)
gray- power good(+5v)
purple- stand by (+5v)
disconnect smps from motherboard give the power to smps and short green and black wires and measure the above voltages

Mar 19, 2010 | Antec SmartPower 2 SP400 400-Watt Power...

2 Answers

Plug wiring


When wiring a new plug for which voltage input?
The cutter has a white wire, a black wire, and a green one - white is the neutral line, black is the hot line, green is ground.
You can see this in section 4-9 of the owners manual, if you don't have a manual you can go to www.millerwelds.com and get a PDF file of the manual.

Rank this answer please,
Carl

Nov 26, 2008 | Miller Welding Tools

1 Answer

Using dryer in 220volt country


Bombay is 240v single phase, the three wires in the socket are active neutral and earth, not as the 2*110v90degree two phase American circuit active1 active2 and neutral
.
If the transformer is designed for American use, it does not step down 220v,
it instead takes a 2*110v90degree 2 phase supply and produces a high current 110v single phase output, by setting both input phases electrically 90degrees apart on a common primary winding.
This is not compatible.

replace the dryer, cheaper faster safer
should have left in Houston

Sep 09, 2008 | Kenmore 62602 Electric Dryer

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Antec Computers & Internet Experts

Steven Wander
Steven Wander

Level 3 Expert

579 Answers

Julie Endres

Level 2 Expert

209 Answers

Wahs Team

Level 2 Expert

205 Answers

Are you an Antec Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...