Question about Toys
I have looked online and have found info. but not where to purchase. I DO NOT WANT A REAL MOTORCYCLE OR ITS PARTS!!!!!
I suggest the walmart of the internet, which is called amazon. Or the flea market of the internet, which is called ebay. if you can't find something on either of those sites, learn to search.
Posted on Dec 15, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Adjust Motorcycle Clutch Cable
Usually there are 2 adjustment points. One at the clutch lever, and one on the clutch pull on the crankcase. Follow the cable from the handlebars to the engine, there should be an adjust bolt or two. The adjustment at the handlebar lever is usually a screw with a thumbwheel lock nut. Depending on what you are trying to adjust, dictates which one you will use and in what direction it will go. If the clutch is slipping, use the thumbwheel adjuster. Loosen it, back the screw out 2-3 turns, tighten. and check you clutch. if this one is all the way out, go to the crankcase, loosen the bolt on the richt side of the bracket first, then loosen the left one, one turn at a time, checing the clutch. once it's where you want it. tighten the right bolt only. You can do this with a set of open end or box wrenches. An adjustable wrench works in a pinch.
Posted on Nov 28, 2008
Here is a copy from Chilton's CB450, 1970 and above, hope it helps. I had to reduce it to monochrome in order to post it. It was 769K in grayscale.
Posted on Feb 23, 2009
I have goldwings since 1980. They are very reliable. First thing I would change is the timing belt. (If it fails, bent valves...) As far as the stator, the normal fix for these 4 cylinder early ones (if they are still working) is to cut the 3 wire plug in between the stator & wiring harness & solder the leads together. Dirt, water, corrosion in this connection makes the stator fail. Make sure your carbs are clean and final drive & ft bearings are re-greased. Next problem that occurs that you can check for is oil seal in front forks. You can remove them & put new seals in by yourself if you have the tools. You should have lots more trouble free mileage if bike has been properly maintained. Rick
Posted on Apr 14, 2009
Motorsports > Monroe, New Jersey 732-446-3386
Scooter City > Island Park, New York 516-470-0409
Scootersmith > Houston, Texas 713-869-4885
Please give this answer a top rating. Thanks Jerry!
Posted on Apr 29, 2009
The filter is connected to the carburetor by two inch black vinyl tubing. Just follow the tubing behind the carb and the filter will be at the end. Normally, the vinyl hose leads to a metal box and the filter is inside the box.
Posted on Jun 07, 2009
Tips for a great answer:
Oct 03, 2017 | Cooktops
Jun 23, 2013 | Motorcycles
lots of online party stores. It's worth shopping around. If you are looking for
specific themes or colors, shopping online is a great way to see what's out
there without feeling pressured to buy.
Jan 10, 2013 | Event Planning & Celebration
Feb 28, 2011 | Computers & Internet
Nov 24, 2010 | 2006 Harley Davidson XL 1200 C Sportster...
Oct 09, 2010 | Honda GL 1200 Aspencade Gold Wing...
Oct 05, 2010 | Logitech QuickCam Messenger Web Camera
Jan 09, 2010 | Mercedes-Benz E350 Cars & Trucks
Nov 10, 2008 | 2005 ATK 450 Mx
892 people viewed this question
Usually answered in minutes!