Question about Epson Office Equipment & Supplies
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: epson dfx-9000
the SP motor brake signal didn't switch on within 3 seconds after turning printer on.
check for disconnected SP motor-related connectors. the printer needs servicing.
Posted on Jan 22, 2008
This error occurs when the Home Position (HP) of the Automatic Paper Thickness Control (APTC) mechanism is not detected.
This error is caused by a malfunction of either the APTC HP sensor circuit, the APTC motor, or the driver circuit on the ROM Board.
Check the following in the order below, testing functionality at each step. If the APTC motor has malfunctioned, be sure to check the motor driver circuit on the ROM Board before replacing the motor.
1. Check connectors CNSEN1 and CNSEN2 on the ROM BOARD.
2. Check and replace the APTC HP UNIT
3. Check both the APTC motor, APTC UNIT, ROM BOARD, and replace either or both as necessary.
Get a service manual HERE if you need it.
Posted on Jul 23, 2008
Tips for a great answer:
Apr 24, 2011 | Epson DFX-9000 Matrix Printer
Nov 20, 2008 | Epson DFX-9000 Matrix Printer
Jun 27, 2008 | Epson DFX-9000 Matrix Printer
Jun 23, 2018 | Epson Office Equipment & Supplies
108 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: