Question about Televison & Video

1 Answer

Having a problem getting it to come on. No power light or anything. Tested all connections and Everthing has power. How is this fixable? Jvc r7500

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Televison & ... Master
  • 74,136 Answers

Fault with the main power supply regulator board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

Posted on Dec 16, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Jvc tv blue light flashes but doesn't turn on


hi yes i would ring the shop thanks
shaun

Jun 14, 2017 | Televison & Video

1 Answer

JVC car audio cd receiver model # KDR-310 will not stay powered up. Shuts down after 2 seconds. What's wrong??


hi marnie, if all the power and speaker cables are connected correctly, then you might have a faulty or shorted speaker in the vehicle.your unit is sensing a fault condition. check the impedance of eack speaker connected to the unit from the harness plug. if this does not help then your unit needs to be bench tested.

May 23, 2012 | JVC AM FM CD DET FACE CAR STEREO

1 Answer

I connect the jvc kdr210 head unit start the truck and the lights will come on then after 5- 10 seconds the lights will cut off and it will not respond. idk if its hooked up correctly but i recently had it...


I would say that the very first thing to check is your battery connection. It could be that your battery is not putting out a good voltage. You should be able to get this tested at any auto parts store. If that is not the case, check to see that your remote cable (typically blue) coming from the back of your stereo deck is getting a good connection, because this could be what is causing the power to cut out.

May 08, 2011 | JVC Kd-r210 Car CD/ MP3 Player

1 Answer

Emachine T2958, tested power supply (good). Green


Is your PC making any beep sounds, anything at all on monitor? if nothing try removing cpu then re-install cpu?

Feb 09, 2010 | E-Machines (T2958) PC Desktop

1 Answer

Dell latitude d600 wont turn on


test power supply- test ram- have cpu tested- test connection from front button to motherboard

Aug 06, 2009 | Dell Latitude D600 Notebook

1 Answer

Jvc th-c50 won't turn on-already changed the fuse even though the old one had very low resistance when tested w/my multimeter.if unplugged for several minutes the stand by light will flash once when...


i was having a simalar problem and was trying to replace the ceramic fuse with a glass one and it wasnt working. i have found the part number for jvc if you want to try and order the ceramic fuse from them and try that. QMFZ059-1R0-E its $8 after shipping.

Jun 11, 2009 | JVC TH-C50 System

2 Answers

My amp stays in protection mode


Does it go into protect in the vehicle if you disconnect the speaker wires from the speaker terminals of the amp?


Nov 29, 2008 | Sony XM-2002GTR Car Audio Amplifier

1 Answer

Av-32d302 tv


The set is shutting down because a problem has been detected. Replacing the remote will not help. Count the flashes and call a JVC servicer to get an idea about what the specific problem may be.

Dan

Jul 29, 2008 | JVC AV-32D302 TV

2 Answers

Akai PDP4290


yes you it is fixable you are having a micro chip problem or a power supply problem. take it to a tech.to have it repair.

Feb 09, 2007 | Akai PDP4290 42 in. EDTV-Ready Plasma...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74118 Answers

Cindy Wells

Level 3 Expert

5101 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...